Unboxing of WeTek Play DVB-S2 Android / Linux STB

WeTek Electronics, a company based in Hong Kong, has sent me an Android TV powered by Amlogic AML8726-MX dual core Cortex A9 processor. Nothing new here, but I was very very interested in reviewing it because it includes a DVB-S2 tuner, and on top of their stock Android firmware, the company provides various Android and Linux firmware files such as CyanogenMod, ParanoidAndroid, OpenELEC, Linux with Enlightenment desktop environment, Lubuntu 14.04 and so on. Today, I’ll list the hardware specifications of the device, show some unboxing pictures and video, and as usual, open the device to see what’s inside. I’ll provide a full review in one or two more posts.

WeTek Play Specifications

Apart from the DVB-S2 tuner are the serial port, the hardware specifications sound familiar:

  • SoC – Amlogic AML8726-MX dual core Cortex A9 @ 1.5GHz with Mali-400MP GPU
  • System Memory – 1GB DDR3
  • Storage – 4 GB NAND flash + 1x micro SD slot
  • Video Output – HDMI, AV (CVBS + R/L audio)
  • Audio Output – HDMI, AV, and optical S/PDIF
  • Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi , and Bluetooth 4.0 (AP6210)
  • USB – 3x external USB 2.0 ports, 2x internal USB 2.0 ports (used)
  • Misc – IR receiver, 3 LEDs for power, Ethernet and Wi-Fi, RS-232 port for serial console.
  • Power – 12V/1.5A

The remote control uses RF technology (air mouse), as well as IR for power on/off.

WeTek Play Unboxing

I’ve received the box via TNT in the package below, together with a registration card with a QR code.

WeTek_Play_PackageThe QR code redirected to a registration page (under development), but in the final product it will simply redirect to WeTek.com, and you just need to click on Activate your device to join the membership section. I’ve been told this can also be done in the box itself with the Welcome Wizard.

WeTek Play and Accessories (Click to Enlarge)
WeTek Play and Accessories (Click to Enlarge)

Inside the package you’ve got two boxes: one with WeTek Play box, and the other with an IR + RF remote control / air mouse, a 12V/1.5A power supply, and, to my surprise, a serial cable (TTL to RS232). There’s no user’s manual with this early sample, but the final product will come with the user’s manual (See PDF), and a HDMI cable. The two AAA batteries required by the remote control are not included, but you’ll probably want to use rechargeable battery with RF remotes as the ones I have need to be recharged every 2 weeks or so.

WeTek Play (Click to Enlarge)
WeTek Play (Click to Enlarge)

The box is made of plastic, but still feel nice. At the front, we’ve got a power button, and the three LEDs for power, LAN, and Wi-Fi, on one side, we can find a USB port, and the micro SD slot, and on the back panel, there are two antenna connectors for DVB-S2, 2 more USB 2.0 ports, the AV port, Ethernet (RJ45), HDMI output, optical S/PDIF, the RS-232 connector, and the power jack.

If you’d rather watch an unboxing video, and listen to my soothing voice, here it is…

Wetek Play Main Board and DVB-S2 Tuner

And now the fun part. The back of the enclosure comes with 4 rubber pads, that I had to remove in order to remove the 5 screws. You’ll also notice the box can be wall-mounted, and there’s a upgrade through hole for firmware upgrade.

Bottom of WeTek Play Enclosure (Click to Enlarge)
Bottom of WeTek Play Enclosure (Click to Enlarge)

The top cover does not pop-up that easily, and I took off the Wi-Fi cable as I opened it, and I’ll need to do some soldering. The final product will come with a Wi-Fi connector, so that issue is less likely to happen for the few people that may open the box.

Top of WeTek Play Board (Click to Enlarge)
Top of WeTek Play Board (Click to Enlarge)

So we’ve got a daughter board with two DVB-S2/S tuners with Availink AVL6211 channel receiver (enhanced version of AVL2108), and the mainboard simply called MX with the Amlogic processor and memory, AP6210 Wi-Fi module, another AVL6211 chip, and two USB dongles with PCB marking reading “USB Token” and “2.4G dongle”.

RF Dongle and USB Token
RF Dongle and USB Token

The one of the top is the 2.4G RF receiver for the remote control, which I find it much nicer than having to connect it outside. I’ve taken it out, and Linux reports it as a USB keyboard mouse by HGBIC (VID=0x2252, PID=0x0100). The dongle at the bottom, is not recognized by Linux, but I’ve been told it’s an anti-copy USB token to protect the firmware, and avoid clones using their firmware. The box won’t boot if you remove this dongle.

Wi-Fi Antenna
Wi-Fi Antenna

Another intriguing part is the way the Wi-Fi antenna is fixed to the enclosure. I’m not sure why it is done that way, but I’ve never seen anything like it in the other boxes I opened.

Bottom of WeTek Play Board (Click to Enlarge)
Bottom of WeTek Play Board (Click to Enlarge)

There’s not that much to see at the back of the board.

WeTek Play does not seem to be available yet, and the company is looking for distributors.

That’s all for today. Next, I’ll probably test Android, especially the satellite receiver part, and post a review, following up by a review of the Linux images with VPU support (hardware video decoding) via Gstreamer (Gplay), but maybe not DVB-S support (TBC).

Share this:

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK Pi 4C Plus
Subscribe
Notify of
guest
The comment form collects your name, email and content to allow us keep track of the comments placed on the website. Please read and accept our website Terms and Privacy Policy to post a comment.
22 Comments
oldest
newest
d1dd1
d1dd1
9 years ago

could you check if openelec works with TV on this box? http://matricom.net/forum/index.php?topic=11823.0

Works great and plays everything on my amlogic mx Box.

Jibril
Jibril
9 years ago

” I’m not sure why it is done that way, but I’ve never seen anything like it in the other boxes I opened. ”
It’s the same dipole that you find if you open a little and classic 2,2 dBi 2,4 Ghz rubber antenna with RP-SMA connector.

Stane1983
9 years ago

RS232 port and cable is UART debug port (TTL to standard RS232 conversion included). Simplifies debugging/developing… No need for soldering UART pins on pcb and having board open.

memleak.in
memleak.in
9 years ago

cool to have so many firmware provided

Stane1983
9 years ago


I know, thats why I wrote it 🙂 I think WeTek is doing good job by not only preparing Amlogic sdk for their box and sell, sell, sell…

m][sko
9 years ago

I hope they will release some stuff as open source (kernel patch,…)

to Stane1983> still no armhf mali drivers from amlogic?

m][sko
9 years ago

I downloaded ubuntu firmware
it isn’t ubuntu it is busybox

They try fbturbo with x.org but is is commented now in xorg.conf
and Enlightenment
they also has build in qt5

and I don’t what version of mali drivers they have
misko@vm4491:~/arm/part2/usr/lib$ readelf -A libMali.so
Attribute Section: aeabi
File Attributes
Tag_CPU_name: “7-A”
Tag_CPU_arch: v7
Tag_CPU_arch_profile: Application
Tag_ARM_ISA_use: Yes
Tag_THUMB_ISA_use: Thumb-2
Tag_ABI_PCS_wchar_t: 4
Tag_ABI_FP_denormal: Needed
Tag_ABI_FP_exceptions: Needed
Tag_ABI_FP_number_model: IEEE 754
Tag_ABI_align_needed: 8-byte
Tag_ABI_enum_size: int
Tag_ABI_optimization_goals: Aggressive Speed
Tag_DIV_use: Not allowed
=> armel libs

m][sko
9 years ago


I can’t find any info that Lubuntu use busybox. I think that Ubuntu firmware is just Buildroot

m][sko
9 years ago


Sorry I didn’t read whole text. I saw ubuntu 🙂

davE
davE
9 years ago

i really like the way they are using internal plug-able expansions so you can potentially replace the dvb card etc, however id REALLY like them to use a quad core with more ram on these in the future… i also wish that the shenzhen OEM’s would start to add USB3 and sata to their products and new SOC ASAP as we can currently replace the x86 boxs without that, id gladly pay $10 more for a product that added that as a generic option and theres really no excuse not to add them today as theres lots of bridge chip… Read more »

taki
taki
9 years ago

Where is kernel source this box. Any body have it. Pls reshare

taki
taki
9 years ago

http://www68.zippyshare.com/v/47206112/file.html
I compiled tvheadend for amlogic kernel 3.0.50 (same kernel of this box)
All needed files inlude zip file. Need root your device and init.d support or manual start. Indeed tvheadend find all mx device tuner part but dont find signsl because tuner driver different other. But wetek device have different driver tuner part. May be work android tvheadend find truely dvb-s2 and find channel, stream xbmc. Anybody have this box pls try it.

Greenslider
Greenslider
7 years ago

Hey

I have one question about the Dvb-s2 tuner, do you think that it is possible to connect the dvb-s tuner to a raspberry pi? I thought that the openelec box from wetek supports also this tuner and also it is a really cheap part and when it would work, that would be a really cool tv receiver

Khadas VIM4 SBC