dvb News - Page 10 of 16 - CNX Software

January 8, 2016August 10, 2016 by Jean-Luc Aufranc (CNXSoft) - 138 Comments

Specs, Unboxing and Teardown of KI Plus Android TV Box with DVB-T2/S2 Combo Tuner

If you’ve been following this blog, you must now that I reviewed K1 Plus Android TV box based on Amlogic S905 processor a little while ago. Videostrong has sent me yet another K1 Plus device, except this time it is an Android receiver with a tuner card supporting both satellite (DVB-S/S2) and terrestrial (DVB-T/T2) reception. Today, I’ll list the specs, take a few pictures of the device, before checking out the tuner board. K1 Plus Android DTV receiver specifications The specifications are exactly the same as the TV box, except for the added tuner: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 1GB DDR3 Storage – 8GB NAND flash (4 to 32GB optional) + micro SD card slot Video Output – HDMI 2.0 up to 4K @ 60Hz with HDCP 2.2 support, and 3.5mm AV jack […]

January 6, 2016January 6, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Outernet Shares Knowledge via their Lighthouse Satellite Receiver

While many of us take Internet access for granted, about 60% of the world population did not have access to Internet at the end of 2014, and Outernet initiative aims to provide educational, emergency, and news content to this segment of the population, which still represents the majority, at a rate of 1GB per day via a satellite receiver called Lighthouse. Let’s check the hardware first: SoC – Amlogic AML8726-MX dual core Cortex A9 @ 1.5GHz with Mali-400MP GPU System Memory – 1GB DDR3 Storage – 4 GB NAND flash + 1x micro SD slot Video Output – HDMI, AV (CVBS + R/L audio) Audio Output – HDMI, AV, and optical S/PDIF Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi with up to 5 clients Tuner – DVB-S2 tuner with two antenna connectors (only one used) USB – 3x external USB 2.0 ports, 2x internal USB 2.0 ports (used) Misc – […]

December 26, 2015March 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Dune HD Solo 4K is a High-End Media Player with a SATA Bay, a DVB-T2 Tuner, and Sigma Designs SMP8758 Processor

Dune HD, a company specializing in “high-performance digital media players”, has just unveiled Dune HD Solo 4K media player based on Sigma Designs SMP8758 dual core Cortex A9 processor, supporting 10-bit HEVC video decoding up to 2160p @ 30 fps, HD audio pass-though, and including a SATA tray. Dune HD Solo 4K specifications: SoC – Sigma Designs SMP8758 dual core Cortex A9 processor @ 1.2 GHz with an ARM Mali-400 GPU and VXP image processing engine System Memory – 1GB Storage – 4GB flash for firmware, internal HDD rack with hot swap function for a 2.5″ SATA drive, SD card reader (TBC) Video Output – HDMI 1.4b up to 1080p60 and 4K @ 30 Hz (including 23.976, 25, 29.97, 50, 59.94Hz refresh rates), and composite video Audio Output – HDMI, analog stereo audio, coaxial S/PDIF (shared via AV port). 24-bit /192 KHz audio support Video codecs – MPEG2, MPEG4, XVID, […]

November 14, 2015December 5, 2015 by Jean-Luc Aufranc (CNXSoft) - 31 Comments

TBS5520 Multi-Standard Tuner Box and Linux Drivers

TBS Technologies is a company that specializes in digital TV tuner cards for PC, and recently they’ve also worked on ARM based boards or devices such as the Matrix 2. The company has sent me one of their TBS5520 USB tuner board and box supporting DVB-T2, DVB-S2, DVB-C and ISDB-T for evaluation, as well as some Linux drivers. Today, I’ll provide some specifications, take some pictures, and show how I compiled and installed the drivers in my Ubuntu 14.04 computer. TBS 5520 Tuner Box specifications TBS5520 is a multi-standard USB tuner with the following features: USB – USB 2.0 device port Antenna connectors – 1x LNB IN, 1x RF IN Standards DVB-S2/S Symbol rate: 1~45Msps; FEC DVB-S2: 8PSK: 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10; DVB-S: QPSK: 1/2, 2/3, 3/4, 5/6, 7/8 DVB-T2/T Receiving channel: VHF band, UHF band; Bandwidth: 1.7,5, 6, 7, 8 MHz; FEC: QPSK, 16QAM, 64QAM, 256QAM […]

September 25, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Android TV Box and OpenELEC Video Tutorials

WeTek has released several video tutorials explaining how to configure WeTek TV boxes such as WeTek Play or WeTek OpenELEC, as well as the upcoming WeTel Core. The tutorials includes instructions for both Android and OpenELEC available in 6 languages: English, French, Portuguese, Spanish, Italian, and German. Some tutorials are clearly specific to WeTek products, such as “How to Activate WeTek Play membership”, but many of the tutorials are more generic starting from simple configurations steps like configuring HDMI output resolution and framerate, or configuring the network, to more advanced tasks such as configuring a DVB-S2 tuner on TVHeadend in OpenELEC. I’ve embedded the latter video tutorial below for reference. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

September 15, 2015 by Jean-Luc Aufranc (CNXSoft) - 33 Comments

Hisilicon HI3798C V200 64-bit ARM Processor Supports HDMI 2.0, 10-bit HEVC, USB 3.0, SATA and More

There have been several Cortex A53 processors announced or released on the market such as Rockchip RK3368, Allwinner A64, or Amlogic S905, but in many cases I can read comments complaining about the lack of high speed interface, incomplete code support, or a weak GPU. Hisilicon Hi3798C V200 offers better features than its competitor, as beside four Cortex A53 cores, it includes a Mali-720 GPU, supports HDMI 2.0 output up to 4K at 60 HZ, 10-bit HEVC / H.265 and VP9 video decoding at 3840×2160 resolution at 60 fps, and integrates SATA and USB 3.0 interfaces. Hisilicon Hi3798C V200 key features and specifications: CPU – Quad core Cortex A53 processor (15K DMIPS) GPU – ARM Mali-T720 supporting OpenGL ES 3.1/2.0, OpenVG1.1, EGL, and Imprex 2.0 PQ engine Memory I/F – DDR3 or DDR4 Video Engine (VPU) Codecs – HEVC, H.264, VP9, VC1, MPEG2 Decoder – 10-bit up to 4Kp60 Encoder – […]

August 30, 2015 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

MOI Pro AMD IPTV Streaming Server Supports Up to 16 Tuners

TBS Technologies is a company specializing in digital TV tuners, with their catalog includes various DVB-T2, DVB-C, DVB-S2 and ATSC tuner cards. They also happen to be the designer of Matrix board and Matrix 2 Android set-top box, both of which run Android or Linux and support some of the company’s tuners. But they also have higher end products such as MOI Pro AMD IPTV streamer based on an AMD Embedded G-Series processor, and supporting up to 4 tuner cards with up to 4 tuners each. TBS MOI Pro AMD specifications: SoC – AMD GX-412HC quad core processor @ 1.2GHz with AMD Radeon HD GPU @ 300MHz (7W TDP) System Memory – 4GB DDR3-1333 Storage – 30GB mSATA SSD, 1x SATA @ 6.0Gb/s, Video Output – 1x HDMI, 1x VGA (reserved connection?) Connectivity – 2x Gigabit Ethernet Tuners – Up to 4 PCIe TV tuner cards (DVB-S2 or DVB-T2/T/C) for […]

August 27, 2015August 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Review of Mygica ATV586 Android Set-Top Box with DVB-T2 Tuner

I’ve already tested some Android TV boxes with tuners such as HD18T (DVB-T2) and WeTek Play (DVB-S2) , but they were all based on Amlogic AML8726-MX dual core processor. Geniatech recently sent me Mygica ATV586 quad core Android DVB-T2 receiver based on Amlogic S805 processor. I’ve already taken a few pictures, and look at the hardware components, so today, I’ll write the review, mainly focusing on the live TV program capabilities including PVR and Timeshifting. First Boot, Settings and First Impressions I’ve connected a hard drive, a webcam, MeLE F10 Deluxe RF dongle, and a keyboard (for screenshots) to the device’s USB ports, as well as HDMI and Ethernet cables, and a TV antenna cable, before connecting the 5V power adapter to start the device. When everything is connected, the boot takes about 1 minute 35 seconds, but without USB devices, it drops down to 44 seconds. Boot time is […]