gateway News - Page 2 of 32 - CNX Software

February 9, 2024February 10, 2024 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Hubitat Elevation Model C-8 Pro Home Automation Hub supports Zigbee, Z-Wave, and Matter devices

Hubitat has recently launched the Elevation Model C-8 Pro Home Automation hub with a Z-Wave 800 radio, a Zigbee 3.0 radio, Wi-Fi, and Ethernet connectivity that upgrade on the earlier C-8 model with more memory (2GB RAM), and a faster 2.0 GHz Cortex-A55 processor. I’ve never written about Hubitat Smart Home solutions, but they seem to have an active community of users, so I’ll check out their latest Elevation Model C-8 Pro gateway and what they have to offer in terms of software and device support. Hubitat Elevation Model C-8 Pro specifications: SoC – Arm Cortex A55 processor @ 2.016 GHz (that could be the Amlogic S905X3 found in the ODROID-C4 SBC) System Memory – 2GB RAM Storage – TBD Connectivity Ethernet RJ45 port WiFi Z-Wave 800 radio Zigbee 3.0 radio Matter support 2x external antennas Power Supply – 5V via USB-C port Dimensions – 8.2 x 7.5 x 1.7 […]

February 5, 2024February 6, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

PANZER-PLUS fanless AIoT computer to support Ubuntu 24.04, Android 14, Yocto 5.0

Taiwan-based MayQueen Technologies has recently introduced the PANZER-PLUS fanless AIoT computer powered by an NXP i.MX 8M Plus Arm SoC with support for Ubuntu 22.04, Android 12/13, and Yocto 4.0 “Kirkstone”, but the company also claims it is working on Ubuntu 24.04 and Android 14 operating systems, as well as Yocto 5.0 “Scarthgap”. The company initially pinged us in 2018 about its NXP iMX6UL-powered PANZER fanless box PC and contacted us again last week with the new PANZER-PLUS model equipped with an NXP i.MX 8M Plus AI processor, which I found only mildly interesting until the company informed me about (planned) software support. So let’s have a closer look. PANZER-PLUS specifications: SoC – NXP i.MX8M Plus CPU – Quad-core Arm Cortex-A53 processor @ 1.8GHz MCU – Arm Cortex-M7 real-time core @ 400 MHz GPU – Vivante GC520L 2D GPU, Vivante GC7000UL 3D GPU VPU – 1080p60 hardware decoder (HEVC, H.264, […]

January 18, 2024 by Tomisin Olujinmi - No Comments

Renesas RZ/G3S is a 64-bit Arm Cortex-A55/M33 microprocessor with low power consumption and enhanced peripherals

Renesas RZ/G3S 64-bit Arm Cortex-A55 microprocessor (MPU) designed for IoT edge and gateway devices consumes as little as 10µW in standby mode thanks to its Cortex-M33 core(s) and features a PCIe interface for high-speed data transfers with 5G wireless modules. A single-core ARM Cortex-A55 CPU powers the RZ/G3s and can distribute workloads to two sub-CPUs, boosting efficiency in task handling and resulting in fewer components and a smaller system size. The Cortex-A55 core operates at 1.1GHz and is designed to improve power efficiency and performance over its predecessor, the Cortex-A53. The RZ/G3S isn’t Renasas’ first Cortex-A55 product as they have previously released the RZ/A3UL and the RZ/G2L, both powered by the same Cortex-A55 CPU. Additionally, Renesas launched the 64-bit RISC-V RZ/Five processor late last year. The RZ/G3S boasts high-speed interfaces such as PCIe and GbE, a better standby mode, and improved security features which make it suitable for IoT applications […]

December 5, 2023December 4, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

Robustel introduces EG5101 and EG5200 Debian 11 industrial IoT gateways with 4G LTE cellular connectivity

Robustel EG5101 EG5200 Debian 11 industrial gateways

Robustel introduced the EG5101 and EG5200 industrial IoT gateways running Debian 11 a few weeks ago, both with 4G LTE cellular connectivity, but the NXP i.MX 6ULL-based EG5101 has a more compact design, while the NXP i.MX 8M Plus-powered EG5200 provides more I/Os and resources. Expanding the earlier EG5100, EG5120, and LG5100 models from the company, the two edge computing gateways target Industry 4.0 and smart infrastructure applications and enable real-time analytics at the edge with lower latency than running workloads in the cloud. Robustel EG5101 and EG5200 SoC/Memory/Storage EG5101 NXP i.MX 6ULL Cortex-A7 32-bit processor @ 792 MHz 512MB to 1024MB DDR3 8GB eMMC flash EG5200 NXP i.MX 8M Plus quad-core Cortex-A53 64-bit processor @ 1.6 GHz with 2.3 TOPS NPU 4GB DDR4 32GB eMMC flash, microSD card socket Connectivity EG5101 1x 10/100 Mbps Ethernet port 4G LTE with 1x SMA-K antenna connector, 2x Mini SIM (2FF) EG5200 5x […]

November 22, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Theengs Bridge BLE to MQTT gateway supports Home Assistant, OpenHAB, Jeedom, NodeRed, and more

The Theengs Bridge is a new WiFi & Ethernet BLE to MQTT gateway running the open-source OpenMQTTGateway firmware, compatible with a range of sensors, and supporting Home Assistant, OpenHAB, Jeedom, NodeRed, and other MQTT-compatible systems. It follows the Theengs Plug smart socket introduced at the beginning of the board with many of the same features (minus the socket part…) but adds Ethernet and an external antenna for improved range, and improves modularity with a Grove I2C connector and mounting holes for a LoRa-E5-based Grove module and a prototyping area where you can solder your own circuitry with DIP components. Theengs Bridge specifications: Wireless module MCU – ESP32 microcontroller with WiFi and Bluetooth Storage – 8MB flash PCB antenna and u.FL antenna connector Connectivity 10/100M Ethernet RJ45 port 2.4 GHz WiFi 4 and Bluetooth LE with 6dBi 50Ohm external antenna Optional LoRa module via Grove I2C connector MQTT protocol Expansion – […]

November 21, 2023December 20, 2023 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

iKOOLCORE R2 mini PC and router review – Part 1: Specs, unboxing, teardown, and first boot

iKOOLCORE R2 is an Intel Alder-Lake-N mini PC and network appliance (router/firewall/gateway) that comes with four 2.5GbE ports, up to 16GB RAM, NVMe storage, and the usual HDMI and USB ports, and offered with either Processor N95 or Core i3-N305 SoC. It’s the successor of the iKOOLCORE R1 with four gigabit Ethernet ports and Intel Celeron N5095 or Jasper Lake processor, and the company sent us a sample for testing, so we’ll start with listing the specifications, check out the mini PC and accessories with an unboxing, teardown the multilayer mini PC to check out the hardware design and explain how to update the SSD or install a wireless module, and check whether it can still boot to Windows 11 (default, preinstalled OS) after my adventurous teardown… iKOOCORE R2 specifications Alder Lake-N SoC Intel Processor N95 quad-core processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel UHD […]

November 20, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

MediaTek Filogic 860 & Filogic 360 WiFi 7 chipsets target mainstream BE7200 routers and clients

MediaTek has unveiled two new WiFi 7 chipsets with the Filogic 860 tri-core Arm Cortex-A73 SoC designed for up to BE7200 mainstream routers and gateways and Filogic 360 WiFi 7 and Bluetooth 5.4 chip for client devices such as smartphones, PCs, laptops, set-top boxes, OTT streaming boxes, etc… for up to 2.9 Gbps bandwidth. The new Filogic 860 and Filogic 360 chipsets provide more cost-effective alternatives to the Filogic 880 SoC for up to BE36000 routers and Filogic 380 clients chip capable of up to 6.5 Gbps PHY data rate, both of which were introduced in May 2022. MediaTek Filogic 860 Filogic 860 specifications: CPU – 3x Arm Cortex-A73 cores clocked at up to 1.8 GHz Network Processing Unit (NPU) – Hardware QoS acceleration and Tunneling Offload Engine for VLAN / PPTP / L2TP / GRE Networking Crypto engine (EIP-197) – For IPv4 NATP / IPv6 / DS-Lite / 6RD […]

October 26, 2023October 25, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

The Portenta Hat Carrier board adds Raspberry Pi HAT support to the Portenta X8 SBC

The Arduino Portenta Hat Carrier board aims to interface the Linux-capable Portenta X8 board with the vast ecosystem of Raspberry Pi HAT (Hardware on Top) expansion boards. Introduced last year, the Arduino Portenta X8 is the first Arduino Pro hardware that can run Linux thanks to its NXP i.MX 8M Mini Arm Cortex-A53 quad-core processor. But it comes in a tiny 66.04 x 25.4 mm form factor which may be great for integration into products, but for prototyping or design of products such as IoT gateways, the company has now launched the Portenta Hat Carrier that enables the board to easily connect with the Raspberry Pi HATs available today. Portenta Hat Carrier specifications: Compatible with the Portenta X8 board and future Portenta with the same high-density connectors Storage – MicroSD card slot Camera I/F – MIPI CSI camera connector (CNXSoft: Arduino does not explicitly say whether it’s compatible with the […]