Linux News - Page 118 of 430 - CNX Software

June 8, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Aetina DeviceEdge Mini Edge AI computers support NVIDIA Jetson SO-DIMM modules

NVIDIA Jetson modules offer a wide range of AI performance starting from the entry-level 492 GFLOPS Jetson Nano module up to the 32 TOPS Jetson AGX Xavier platform. That’s probably Aetina decided to offer its DeviceEdge Mini AI edge solution with either Jetson Xavier NX, Jetson Nano, or Jetson TX2 NX pin-compatible SO-DIMM modules designed for applications in smart transportation, factories, retail, healthcare, AIoT, robotics, etc… The three models M1, M2, and M3 can all take the Jetson modules listed above, and come in a very similar form factor with the following key features: Common features: Storage – 128GB M.2 NVMe SSD (default) Video Output – Micro HDMI 1.4 connector Networking – Gigabit Ethernet RJ45 port, optional WiFi/Bluetooth M.2 module USB – 1x USB Type-C OTG only port Expansion 1x M.2 2242 M-key socket fitted with NVMe SSD 1x M.2 2230 E-key socket for optional Wifi/BT function 1x DB15 male […]

June 7, 2021June 8, 2021 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Combining OSTree and SW Containers for reliable IoT Device updates

CNXSoft: This is a guest post by Drew Moseley, Technical Solutions Architect at Toradex, explaining how the company updates Linux IoT devices firmware with OSTree (aka libostree) open-source operating system build and deployment tool, as well as Docker software containers. Every day more and more connected devices are being brought to market and estimates for the total size of the Internet of Things (IoT) market are as high as $1.5 trillion by 2027. Gas pumps, medical devices, and point of sale systems are increasingly connected, making it virtually impossible to avoid interacting with these devices, even for complete Luddites. In the home, devices such as power meters, light switches, and security cameras are commonly internet-enabled allowing for smart home functionality. The level of complexity in the software for these devices increases with the functionality, and the number of devices with software defects in the field is growing. In many cases, […]

June 5, 2021 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

3D printer board leverages Allwinner A64’s AR100 core for real-time control

Elias Bakken has been working on Recore 3D printer control board based on Allwinner A64 processor since 2019 and with revision “A5” of the PCB, Recore is now considered stable and will ship to customers. But wait? Isn’t Allwinner A64 just a quad-core Cortex-A53 processor meant to run Linux? But 3D printer control boards require real-time I/O and that’s why many are designed with STM32, Arduino compatible Microchip MCU or other microcontrollers. The trick here is that Elias did not use the Cortex-A53 cores for real-time control, but instead the 300 MHz AR100 32-bit OpenRISC 1000 core found in Allwinner A64 SoC. Recore specifications: SoC – Allwinner A64 quad-core Cortex-A53 processor running at 1 GHz, with AR100 32-bit core @ 300 MHz, Mali-400MP2 GPU System Memory – 1 GB DDR3 RAM Storage – 8 GB eMMC flash Video Output – HDMI output to connect a display Networking – Gigabit Ethernet […]

June 4, 2021June 4, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Ryzen Embedded V2000 mini-ITX industrial motherboard offers four DP++ video ports

AMD Ryzen Embedded V2000 mini-ITX motherboard

DFI RNO171 is a mini-ITX industrial motherboard powered by an AMD Ryzen Embedded V2000 processor with up to 64GB RAM, two SATA ports, four DisplayPort++ video outputs, and plenty of I/Os including dual GbE, a PCIe x16 expansion slot, multiple USB and serial ports, and more. DFI RNO171 mini-ITX SBC specifications: SoC – AMD Ryzen V2000 Series Processors either: AMD Ryzen Embedded V2748, 8C/16T up to 2.9GHz (4.25GHz) with 4MB cache, 7 CU Radeon Vega graphics; 45W TDP AMD Ryzen Embedded V2546, 6C/12T up to 3.0GHz (3.95GHz), with 3MB cache, 6 CU Radeon Vega graphics; 45W TDP AMD Ryzen Embedded V2718, 8C/16T up to 1.7GHz (4.15GHz), with 4MB cache, 7 CU Radeon Vega graphics; 15W TDP AMD Ryzen Embedded V2516, 6C/12T up to 2.1GHz (3.95GHz), with 3MB cache, 6 CU Radeon Vega graphics; 15W TDP System Memory – Up to 64GB dual-channel DDR4 (ECC/non-ECC) via 2x 260-pin SODIMM sockets Storage […]

June 4, 2021June 4, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

TQ unveils i.MX 8M Plus LGA module and evaluation single board computer

We’ve seen plenty of systems-on-module based on NXP i.MX 8M Plus AI processor announced at Embedded World 2021 either with edge or board-to-board connectors. TQ TQMa8MPxL is a bit different as an i.MX 8M Plus LGA (Land Grid Array) system-on-module meant to be soldered on a carrier board. The company also took the occasion to unveil STKa8MPxL evaluation kit based on TQMa8MxML in single board computer format to demonstrate its new LGA module. TQMa8MPxL i.MX 8M Plus LGA module Specifications: SoC – NXP i.MX 8M Plus “Quad 8 ML/AI”, “Quad 6 Video”, or “Quad 4 Lite” processor with four Cortex-A53 cores, one Cortex-M7 core, Vivante GPU, video encoder/decoder, HiFi4 audio DSP, and 2.3 TOPS AI accelertor System Memory – Up to 4 GB LPDDR4 Storage – Up to 256 MB (MBytes)Quad SPI NOR flash, up to 256 GB eMMC flash, optional EEPROM up to 64 Kbit 362-pin LGA with Storage […]

June 4, 2021June 4, 2021 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

reServer 2-bay multimedia NAS is equipped with an Intel Core Tiger Lake SBC

Seeed Studio has just introduced reServer dual-bay multimedia NAS based on Intel Core i3/i5/i7 Tiger Lake 11th generation processor. The networked storage device is based on ODYSSEY X86 V2 single board computer that offers an upgrade to the ODYSSEY-X86J4105 and ODYSSEY-X86J4125 Gemini Lake SBC’s. reServer comes with up to to 64GB dual-channel memory, dual 2.5GbE, support for two 3.5-inch SATA drives, HDMI and DisplayPort video output, and some USB 3.0/2.0 ports. reServer (preliminary) specifications: SoC (one or the other) Intel Core i3-1115G4 dual-core/quad-thread processor with 48 EU Intel UHD Graphics @ 400 – 1250MHz; 28W TDP Unnamed Intel Core i5 with 80 EU Intel Iris Xe Graphics G7 @ 400-1300MHz; 28W TDP Unnamed Intel Core i7 with 96 EU Intel Iris Xe Graphics G7 @ 400-1300MHz; 28W TDP Co-processor – Microchip ATSAMD21G18 32-Bit Arm Cortex-M0+ microcontroller System Memory – Up to 64GB dual-channel DDR4-3200 SDRAM via two SO-DIMM sockets Storage […]

May 31, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Mercury+ XU6 Xilinx Zynq UltraScale+ module is optimized for I/O-intensive applications

Enclustra, a company headquartered in Switzerland specializing in FPGA solutions, has recently announced the launch of the Mercury+ XU6 system-on-module based on Xilinx Zynq UltraScale+ MPSoC. The module is optimized for I/O-intensive applications with up to 294 user I/Os, up to eight 6/12.5 Gbps multi-gigabit transceivers, and available with six different variants of Xilinx MPSoC. The company also offers Mercury+ ST1 and PE1 baseboards for evaluation and early software development. Mercury+ XU6 SoM Key features and specifications: SoC – Xilinx Zynq Ultrascale+ MPSoC (ZU2CG, ZU2EG, ZU3EG, ZU4CG, ZU4EV, or ZU5EV) with: CPU ARM dual-/quad-core Cortex-A53 processor up to 1333 MHz ARM dual-core Cortex-R5 up to 533 MHz GPU – Mali-400MP2 GPU (only for EG/EV variants) Video Codecs – H.264 / H.265 Video Codec (only for EV variants) FPGA fabric – Up to 256,000 system logic cells System Memory – Up to 8 GB DDR4 ECC SDRAM (PS side) Storage – […]

May 27, 2021May 31, 2021 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

QMiroPlus-201W – Arm router and Intel NAS in one device with Qualcomm IPQ4019 & Celeron J4125

QNAP QMiroPlus-201W is an unusual networked storage device that’s acting both as a 2.5GbE & WiFI 6 router and NAS combining Qualcomm IPQ4019 Arm SoC for the router functions, and an Intel Celeron J4125 quad-core Gemini Lake processor for the NAS functions. Usually, you’d get the choice of either an Arm or Intel processor, but here QNAP decided to use both to keep the same performance as having separate Arm-based router and Intel-based NAS, but in a much more compact form factor. QNAP QMiroPlus-201W hardware specifications: SoC/memory/internal storage For router SoC – Qualcomm IPQ4019 quad-core Arm Cortex A7 @ 716.8MHz Memory – 512MB DDR3 Internal Storage – 4MB SPI NOR Flash & 4GB eMMC flash For NAS SoC – Intel Celeron J4125 quad-core Gemini Lake processor @2.0 GHz Memory – 4GB DDR4 Internal Storage – 4GB eMMC flash Data Storage – 2x 2.5-inch SATA 3Gb/s (Compatible with 6Gb/s SSD/HDD) bay Networking […]