Bqeel MVR9 TV Box Review – Part 1: Specifications, Unboxing and Teardown

All Rockchip RK3328 based 4K TV boxes I’ve seen so far come with Fast Ethernet, not Gigabit Ethernet, with the exclusion of Rock64, which is not a TV box, but a development board. But Nagrace sent me Bqeel MVR9 box that comes with Gigabit Ethernet, in order to write a review. I’ll start by having a look at the hardware first, before experimenting with the firmware in several weeks. Bqeel MVR9 Specifications SoC – Rockchip RK3328 quad core Cortex A53 processor with ARM Mali-450MP2 GPU System Memory – 2 GB DDR4 @ 1066 MHz Storage – 16 GB eMMC flash + micro SD card slot Video Output – HDMI 2.0a up to 4K @ 60 Hz with HDR10 and HLG support, 3.5mm AV port (composite video) Video Codec – 4K VP9, H.265 and H.264, 1080p VC-1, MPEG-1/2/4, VP6/8 Audio Output – Via HDMI, and AV (stereo audio) ports; optical S/PDIF […]

H96 Pro Octa Core TV Dongle Runs Android 7.1.1 on Amlogic S912 Processor

That one will be confusing as H96 Pro is already a TV box, but somebody must have thought that model number was so good, it had to be re-used in another products. So I present to your H96 Pro TV dongle powered by the same Amlogic S912 processor running Android 7.1.1 Nougat. It’s not the first octa-core HDMI TV stick, as we’ve seen MeegoPad A02 (Allwinner A83T) and NEXBOX 809VI (Rockchip RK3368) in the past, but AFAICR I have not come across Amlogic S912 sticks before. H96 Pro HDMI TV stick specifications: SoC – Amlogic S912 octa-core ARM Cortex A53 processor @ up to 1.5 GHz with ARM Mali-820MP3 GPU System Memory – 2GB DDR3 Storage – 8 GB eMMC flash, micro SD slot up to 32GB Video & Audio Output – HDMI 2.0a male connector with HDR support Video Codec – 4K H.265 and VP9 @ 60 fps, 4K […]

Xnano X5 4K TV Box with Gigabit Ethernet, HDMI Input, USB 3.0, and SATA Goes for $68 and Up

Realtek RTD1295 processor allows for 4K TV boxes with DVR and PiP function through HDMI input, and USB 3.0 and SATA 3.0 storage interfaces. I previously reviewed Zidoo X9S and EWEAT R9 Plus based on the solution, and I especially liked support with NAS function through OpenWrt running side-by-side with Android 6.0. Those are high-end devices that cost well over $100, but we’ve recently seen cheaper models, likely with less refined firmware, no metal case, and possibly lacking OpenWrt that go as low as $78 shipped with LAKE I Home Cloud TV box. We can now get an even cheaper model, albeit with just 1GB RAM and 8GB flash, thanks to Xano X5 sold for $68.32 including shipping on Aliexpress. There’s also a 2GB/16GB version on the same page going for $82.76. Xnano X5 Smart Box specifications: SoC – Realtek RTD1295 quad core Cortex A53 processor with ARM Mali-T820 MP3 […]

How to Use Octoprint on Orange Pi Lite Board, Amlogic S905X and S912 TV Boxes

Karl here. This was article originally going to be how to setup Octoprint 3D printer server on an Orange Pi Lite. But after looking and running through the instructions it seemed like it would be too much so I created an img to simplify things. I also explored running Octoprint on an Amlogic S905x or S912 device and it turned out to be an even better solution. You get a case, power supply, and eMMC flash storage. What is Octoprint? I use Octoprint mainly for its ability to start and stop prints without having to use an sd card. Time lapse is also a nice feature. And one last thing is that I setup a pushbullet notification when it is complete. For a full list of features check out http://octoprint.org/. What is needed? Orange Pi Lite board provided by GearBest for the article, or an Amlogic S905X or S912 Android […]

MA8-4K is a $19 Android TV Box based on Rockchip RK3229 Processor (Promo)

MA8-4K is yet another TV box running Android 5.1 on Rockchip RK3229 quad core Cortex A7 processor, but it might one of the cheapest right now, as GearBest offers it for $18.99 shipped with GBMA87 coupon instead of $27.99 “flash sale” price. This is likely valid for only a few hundred boxes. MA8-4K specifications: SoC – Rockchip RK3229 quad core ARM Cortex A7 processor @ 1.5 GHz with ARM Mali-400MP2 GPU System Memory – 1GB DDR3 Storage – 8GB flash + micro SD card slot up to 32GB Video Output – HDMI 2.0 up to 4K2K @ 60 fps, and 3.5mm AV output (composite) Audio Output – HDMI, AV, and coaxial S/PDIF Connectivity – 10/100 Mbps Ethernet, 802.11 b/g/n WiFi (AP6051 chip); Bluetooth is mentioned in title, but not in description, so it’s unclear whether it’s implemented. USB – 2x USB 2.0 host ports Power Supply – 5V/1.5A Dimensions – […]

Vorke Z3 Rockchip RK3399 TV Box Review – Part 2: Android 6.0 Firmware

Vorke Z3 is another mini PC / TV box powered by Rockchip RK3399 hexa core processor with two Cortex A72 cores, and two Cortex A53 cores making it theoretically one of the fastest TV boxes on the market, excluding NVIDIA Shield Android TV which is well ahead of the competition, albeit with poor worldwide availability. I’ve have already shown Vorke Z3 hardware inside out, so in the second part of the review, I’ll focus on testing the firmware including video playback, and the system performance, and see how it compares to the similar Yundoo Y8, which I reviewed last month. First Boot, Setup, and First Impressions One the selling point of Vorke Z3 is its SATA connector, so I connected a 1TB 3.5″ SATA drive first, as well as Seagate USB 3.0 drive (1TB) to the USB 3.0 port, I also added a USB hub to connect a USB keyboard, […]

Ebox T8 V Octa-core Android TV Boxes Giveaway

Entertainmentbox.com has contacted me asking whether I’d be interested in hosting a giveaway for two Ebox T8 V TV boxes with S77 Pro air mouse on CNX Software, and I thought it was a good idea, so here we are. EBox T8 V is an Amlogic S912 TV box running Android 6.0 with some pre-installed apps specifically geared towards to UK market like BBC iPlayer, and FilmOn, as well as a 2.5″ SATA bay. It also comes with IPVanish app which I successfully tried to watch UK programs, and I had overall a positive experience with the device as I reported in Ebox T8 V review, with the main problems being the lack of audio license and support for HDMI pass-through. I also know somebody who uses the previous model – Ebox T8 IV – as their main streaming device, and he was pretty happy about it after several months […]

How to Install RKMC “Kodi for Rockchip” App in your TV Box

I’ve started playing with Vorke Z3, an Android 6.0 TV box based on Rockchip RK3399 , and saying that Kodi 17.3 – installed from the Google Play Store – is not working so well is an understatement. The other Rockchip TV boxes I’ve recently reviewed with Android 6.0.1 such as Yundoo Y8 and A95X R2 are all using TVMC, a fork of Kodi 16.1 specifically designed for Rockchip devices. However, there’s no source code for that app, but a Rockchip engineer is maintaining his own fork of Kodi, with the code and some binaries libraries released on Github. The project is called RKMC. I did install the app, but I misunderstood part of the instructions at first, and the device would not boot anymore. I lost many hours of work, as I had to reflash the firmware. So I’ll show how I installed it in Vorke Z3 TV box. You […]

EDATEC Raspberry Pi 5 fanless case