TV box News - Page 76 of 107 - CNX Software

November 5, 2014March 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Review of Rippl-TV Android XBMC TV Box

Rippl-TV is an Android TV box based on an update revision of Eny Techology/Shenzhen Tomato M8 (square) TV Box with an Amlogic S802 quad core processor, but featuring a different firmware with an alledgedly customized Android 4.4 OS called utilOS, and a launcher based on XBMC also called Rippl-TV. I’ve already written an unboxing post, including pictures of the board, so today I’l focus on the full review, and compare the performance to the original M8, as well as a closer look at the new user interface. First Boot, Settings and First Impressions Rippl-TV comes with an IR remote, and as long as your stay in XBMC and play videos, it’s fine, but as this type of remote is usable with most Android apps, I used Mele F10 Deluxe air mouse instead to control the device. I’ve connected an Ethernet cable, an HDMI cable, a USB hard drive, and a […]

November 3, 2014 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

How to Flash Firmware to Realtek RTD1195 Media Players

Android TV boxes based on Realtek RTD1195 SoC are cheap (about $60), with a relatively slow dual core Cortex A7 processor, but include fast interfaces such as USB 3.0, Gigabit Ethernet, and sometimes SATA, and are said to be very good at playing videos. After several months of development since they’ve first been spotted, RTD1195 media player are finally shipping. One of the models is M-195, which had its firmware recently released, and can be downloaded from copy.com, filefactory, mediafire, or solidfiles servers. This firmware is based on Android KitKat 4.4.2, with build number rtk-phonenix-eng 4.4 krt160 eng.ton.20141024.094201. Firmware update is pretty easy, and is operating system agnostic, since all you need to do is to basically copy the firmware file to a USB flash drive. A PC is not even necessary, as you can download the file and extract it directly from the mini PC itself. The same procedure […]

November 1, 2014November 4, 2014 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Unboxing of Rippl-TV XBMC Android Media Player

Half year ago, I reviewed Shenzhen Tomato M8 / TM8 Android TV Box. It was the first hardware I received based on Amlogic S802, and although I found overall performance and video playback in XBMC was very good, the firmware was not always stable, and Wi-Fi performance was poor. Shenzhen Tomato has now sent me another model based on Amlogic S802 called Rippl-TV (click for full specs), with an hardware very similar to M8 as we’ll see below, but a completely different firmware that relies on XBMC as the Android launcher. Rippl-TV Unboxing I received the TV Box by Fedex in the following package that reads “Rippl-TV a drop of perfection brings out the best in media…” The package lists the key features of the TV with 4K UHD video playback, XBMC Rippl-TV Edition, Android 4.4 OS (called UtilOS), dual band Wi-Fi, a quad core Cortex A9 CPU coupled with […]

October 28, 2014October 29, 2014 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

OpenELEC for M8 TV Box (Amlogic S802) with USB Tuner Support

M8 TV Box is an Android media player based on Amlogic S802 that’s relatively popular. We’ve already seen XBMC Linux ported to M8 device, for people who want a more pure XBMC experience, and automatic frame rate switching, but now OpenELEC Beta 2 is also available for the device thanks to Alex Deryskyba (Codesnake). The firmware image (OpenELEC-Meson8-K200-devel-test build 2.zip) will work on M8 / TM8, and any other Amlogic S802 devices based on K200 board. It is based on OpenELEC 4.1.2 and Linux 3.10, and a beta version, so there may still be some bugs, for example Bluetooth is not working. One very interesting feature is built-in VDR / Tvheadend DVB backends which means you should be able to use one of these USB tuners to watch Live TV from your box via satellite (DVB-S/S2), cable (DVB-C) or digital terrestrial TV (DVB-T2/ATSC) dongle. The zip files contains three files […]

October 28, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Amazon Introduces $39 Fire TV Stick to Compete with Chromecast, Roku Streaming Stick

Amazon has decided to put Fire TV media player functionality into a low cost HDMI TV stick called “Fire TV stick” to offer an alternative to the likes of Google Chromecast, and Roku Streaming Stick. The device is based on a Broadcom BCM28155 dual core processor with the same VideoCore IV GPU/VPU found in BCM2835 SoC used in the Raspberry Pi. Fire TV stick hardware specifications: SoC – Broadcom BCM28155 (Capri) dual core ARM Cortex A9 processor @ 1.0 GHz with VideoCore IV GPU/VPU System Memory – 1GB RAM with half reserved to the system, and the other half dedicated to video. Storage – 8 GB internal storage Video / Audio Output – HDMI 1.4b output, w/HDCP 1.4. Resolution: 720p and 1080p up to 60fps Video Codecs – H.264 Audio – AAC-LC, AC3, eAC3 (Dolby Digital Plus), FLAC, MP3, PCM/Wave, Vorbis Connectivity – dual-band/dual-antenna 802.11a/b/g/n Wi-Fi (2×2 MIMO), Bluetooth 3.0 […]

October 24, 2014December 18, 2014 by Jean-Luc Aufranc (CNXSoft) - 34 Comments

$80 CX-S806 Android Mini PC Powered by Amlogic S812 SoC

Yesterday, I wrote about two upcoming Amlogic S812 Android TV boxes by Eny Technology, namely M8S and M8C, with a production trial run scheduled by the end of this month, but I’ve seen then been informed that CX-S806 TV box with the latest Amlogic quad core processor, 2GB RAM, and 8GB eMMC flash is already shipping for as low as $80, as well as a model with a 2MP front camera called CX-S806S. CX-S806 / CX-S806S technical specifications: SoC – Amlogic S812 quad core cortex A9r4 @ 2.0 GHz with octa-core Mali-450MP6 GPU up to 600+ MHz System Memory – 2 GB DDR3 Storage – 8GB flash. No SD card slot Connectivity – 10/100M Ethernet, dual band 802.11 b/g/n Wi-Fi, Bluetooth 4.0 (AP6330 wireless module) Video Output – HDMI 2.0 up to 4K2K @ 60 Hz (TBC), 3.5mm AV jack (composite + stereo audio) Audio Output – HDMI, AV, optical […]

October 23, 2014October 23, 2014 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

JmGO G1 Android “Home Theater” Projector Powered by Mstar 6A918 SoC

JmGO G1 is a neat looking Android 4.4 projector powered by Mstar 6A918 quad core Cortex A9 processor with a Mali-450MP4 GPU (same as Mstar 9810?), and featuring a Texas Instruments LED based DLP projector. It comes with USB 2.0 / 3.0 ports, Gigabit Ethernet, HDMI, AV, S/PDIF ports, and four speakers on the periphery. Tentative hardware specifications: SoC – Mstar MSO6A918 Quad core ARM Cortex A9 @ 1.5GHz with an ARM Mali-450MP4 GPU. System Memory – 2GB DDR3 Storage – 16 GB eMMC + microSD card slot Projector Texas Instruments DLP RGB LED. Native resolution: 1280 x 800 30,000 hours LED life (About 10 years @ 10 hours per day) 15″ to 300″ screenI Brightness – 450 Lumens Video Inputs – HDMI IN, AV IN Audio I/Os – Inputs HDMI, AV, coaxial S/PDIF; Output: 4x speakers Connectivity – Gigabit Ethernet, 802 b/g/n Wi-Fi, Bluetooth USB – 1x USB 2.0 […]

October 23, 2014October 23, 2014 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Eny M8S and M8C Android Media Players Powered by Amlogic S812 SoC

The first Amlogic S812 Android TV box I had seen was Xtreamer Wonder which should start shipping for 99 Euros ($140) by the end of the month, but they’ll have some competition as Eny Technology will soon manufacture M8S and M8C Android media players, also based on the same quad core Cortex A9 processor, with 4K UHD video output and HEVC/H.265 hardware video decoding. M8S and M8C have the same technical specifications except that the former comes with 2GB RAM, and the latter with 1GB RAM: SoC – Amlogic S812-H quad core cortex A9r4 @ 2 GHz with octa-core Mali-450MP6 GPU @ 600+ MHz System Memory – 1GB (M8C) or 2 GB (M8S) DDR3 Storage – 8GB NAND flash + micro SD card reader Connectivity – 10/100M Ethernet, dual band 802.11 b/g/n Wi-Fi, Bluetooth 4.0 Video Output – HDMI 1.4 up to 4K2K @ 30 Hz, AV port Audio Output […]