uefi

Posted on by Jean-Luc Aufranc (CNXSoft) - 22 Comments on MINIX NEO Z83-4 mini PC Review – Part 2: Windows 10 and Benchmarks

MINIX NEO Z83-4 mini PC Review – Part 2: Windows 10 and Benchmarks

I’ve listed specifications and posted photos of MINIX NEO Z83-4 mini PC in the first part of review, and while NEO Z83-4 is yet another Intel Atom x5-Z8300 device, it’s clear the company has made specific efforts for the thermal design with a large heatsink and aluminum bottom cover, and provided a solid 12V/3A power supply. So in the second part of the review, I’ll check how Windows 10 performs in the device, and run some benchmarks to compare it to other low power Intel mini PCs. MINIX NEO Z83-4 Setup & System Information If you’ve connected USB mouse and keyboard, HDMI and Ethernet, a USB 3.0 hard drive to the USB 3.0 port, and the power cord. Pressing the power button on the right side will boot the device. A typical boot will take around 30 seconds to the desktop. My system was already configured with Z83-4 user, possibly […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 21 Comments on MINIX NEO Z83-4 Fanless mini PC Review – Part 1: Specs, Unboxing and Teardown

MINIX NEO Z83-4 Fanless mini PC Review – Part 1: Specs, Unboxing and Teardown

MINIX has just launched a new Windows 10 mini PC with MINIX NEO Z83-4 powered by an Intel Atom x5-Z8300 quad core processor, 4GB RAM, 32GB storage, Gigabit Ethernet, 802.11ac WiFi, etc.. The company sent me an early review sample, and today I’ll go through the specs, take pictures of the device and accessories, and tear it down to check out the PCBA, and the thermal design. MINIX NEO Z83-4 Specifications MINIX latest mini PC has slightly higher-0end specifications that most X5-Z8300 computers or sticks: SoC – Intel Atom x5-Z8300 “Cherry Trail” quad core processor @ 1.44 GHz / 1.84 GHz (Turbo) with Intel Gen8 HD graphics (2W SDP) System Memory –  4GB DDR3L Storage – 32 GB eMMC 5.0 flash + micro SD slot Video Output – HDMI 1.4 and mini DP up to 4K @ 30 Hz Audio I/O – HDMI, 3.5mm earphone jack Connectivity – Gigabit Ethernet, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 18 Comments on U-Boot Now Supports UEFI on 32-bit and 64-bit ARM Platforms

U-Boot Now Supports UEFI on 32-bit and 64-bit ARM Platforms

Intel/AMD x86 based computers now boot via a standard UEFI binary, which can load grub2, allows you to update the command line as needed, or select different version of the Linux kernel. On ARM everything is a little more complicated and messy, as bootloaders such as U-boot need to support different configurations formats. Alexander Graf has been working on implementing UEFI support in U-boot, and it’s now supported by U-boot mainline and enabled by default for 32-bit and 64-bit ARM platforms, but not x86-64 (yet). That means you should now be able to boot any ARM boards supported by mainline U-boot through UEFI. Alexander gave a presentation about his work at an openSUSE event in June, and demonstrated u-boot with UEFI, and GRUB2 support with an openSUSE image running on a Raspberry Pi board. Thanks to David for the tip. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 7 Comments on Linux 4.7 Release – Main Changes, ARM and MIPS Architectures

Linux 4.7 Release – Main Changes, ARM and MIPS Architectures

Linux 4.7 is out: So, after a slight delay due to my travels, I’m back, and 4.7 is out. Despite it being two weeks since rc7, the final patch wasn’t all that big, and much of it is trivial one- and few-liners. There’s a couple of network drivers that got a bit more loving. Appended is the shortlog since rc7 for people who care: it’s fairly spread out, with networking and some intel Kabylake GPU fixes being the most noticeable ones. But there’s random small noise spread all over. And obviously, this means that the merge window for 4.8 is open.Judging by the linux-next contents, that’s going to be a bigger release than the current one (4.7 really was fairly calm, I blame at least partly summer in the northern hemisphere). Linus Linux 4.6 brought USB 3.1 superspeed, OrangeFS distributed file system, 802.1AE MAC-level encryption (MACsec), and BATMAN V protocol support, improved […]

Posted on by Karl Johnson - 11 Comments on Morefine M1+ Review – A Dual Boot Windows and Android TV Stick

Morefine M1+ Review – A Dual Boot Windows and Android TV Stick

Karl here and I will be reviewing the Morefine M1+. It is an Intel based stick PC with an Intel Atom x5-Z8300 processor with 2GB RAM and 64 GB of storage. It dual boots Windows 10 Home 32 bit and Android 5.1. In this review, I won’t be doing many benchmarks because they have been done a lot in the past. Be careful when researching this product because there are 2 devices with same name with different specs. The other one has an Intel Atom z3735 and only 32GB storage and Android 4.4. The box came expertly wrapped and I have never seen a package delivered and protected so well. In the box was the stick, short HDMI extension, power cable, and instruction manual. No micro USB OTG cable is included. I didn’t find this an issue because I had several already. Specs OS Version: OS Windows 10 (Trial Version) […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 21 Comments on ARMADA 8040 Networking Community Board with a Quad Core ARM Cortex A72 SoC Coming Soon for $300 and Up

ARMADA 8040 Networking Community Board with a Quad Core ARM Cortex A72 SoC Coming Soon for $300 and Up

Developers interested in ARMv8 server or networking boards are starting to have more and more affordable choices. After AMD Opteron A1100 series based LeMaker Cello board, and Softiron Overdrive 1000 server, SolidRun is now working on ARMADA 8040 networking community board powered by Marvell ARMA8040 quad core Cortex A72 network processor. ARMADA 8040 networking board (mrvl8040) preliminary specifications: SoC – ARMADA 8040 (88F8040) quad core Cortex A72 processor @ up to 2.0 GHz with MoChi architecture System Memory – 4GB DDR4 DIMM by default Storage – 4x SATA 3.0 port + micro SD slot Connectivity – 1x Gigabit RJ45 port, 1x SFP SGMII @ 2.5Gbps, dual 10Gbps copper with auto switchover to dual SFP+ Expansion – 1x PCIe-x4 3.0 slot, Linaro 96Boards expansion slot exposing GPIO, UART, I2C and SPI, Marvell TDM module header USB – 1x USB 3.0 port, 2x micro USB ports Debugging – Console port (UART) over […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 15 Comments on $599 Softiron Overdrive 1000 Server is Powered by AMD Opteron A1100 64-bit ARM Processor

$599 Softiron Overdrive 1000 Server is Powered by AMD Opteron A1100 64-bit ARM Processor

ARMv8 servers have been around for a year or so, but normally only available to companies, mostly due to their very high price. LeMaker Cello board based on AMD Opteron A1120 quad core SoC have changed that since it’s priced at $299, but I’m not sure it’s shipping right now, and it’s not a complete solution fitted with memory and storage, and lacks an enclosure. The good news is that Softiron has just launched Overdrive 1000 server powered by AMD Opteron A1100 series processor, with 8GB DDR4 RAM, a 1TB drive, and a case. Softiron Overdrive 1000 server specifications: SoC – AMD Opteron A1100 series quad core ARM Cortex A57 processor System Memory – 2x RDIMM slots fitted with 8GB DDR4 DRAM and expandable to 64GB Storage – 2x SATA 3.0 connector with one fitted with  a 1TB HDD Connectivity – 1x GBase-T Ethernet USB – 2x USB 3.0 ports […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Linaro Connect 2016 Bangkok Schedule – March 7-11, 2016

Linaro Connect 2016 Bangkok Schedule – March 7-11, 2016

Linaro Connect Bangkok (BKK16) will take place on March  7 – 11, 2016, and the schedule is now available for the 5-day event with keynotes and sessions. Whether you’re going to attend or not, it’s always interesting to check the schedule to find out what’s going on in terms of ARM Linux development. The five days will focus on work by different Linaro groups, but really sessions are mixed for any given day, and I’ve created a virtual schedule for each day with available information, as Linaro has become a little more closed to the outside than when it was launched a few years ago. Monday 7 – LITE (Linaro IoT & Embedded Group) 1400 – 14:50 – Evolution of the Reference Software Platform Project The Reference Software Platform lead project was introduced in Linaro Connect San Francisco 2015, and since then it evolved and matured with the completion of […]