watch News - Page 2 of 5 - CNX Software

January 8, 2016 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

F68 Smart Watch Review

After No.1 D3 and SMA-Q smartwatches, Makibes F68, or just F68, is my third attempt at reviewing a smartwatch, and on paper it matches all of my main requirements namely always-on display, fitness tracking with heart rate monitor, one week of battery life, and IP67 ingress protection rating to have some waterproofness. I’ve already taken pictures of the device, so today I’ll go through the user interface on the watch, and Android app, and report my experience after using the watch for over 10 days. The watch has an e-Paper display with decent viewing angles, and very good readability during the day, however at night, you’ll need to find the light switch or use a torchlight, as the watch does not have backlight at all, and it’s unreadable. There’s actually no buttons at all and everything is controlled via the touchscreen, and/or the app available for Android or iOS. The […]

January 6, 2016January 6, 2016 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

Omron Project Zero BP6000 is Both a Blood Pressure Monitor and a Smartwatch

Many smartwaches or fitness trackers include an heart rate monitor, but instead many people need to monitor their blood pressure to make sure it’s not too high (hypertension) or low (hypotension). Usually this involves either going to the doctor, or doing measurements at home with a blood pressure monitor by placing a cuff on the upper arm, and in this should take a short time, but many people may still not want to bother with the procedure. So Omron has designed a new blood pressure monitor that looks like a large smartwatch, and includes the same function as fitness monitors, in order to simply the process further, and have more people regularly measure their blood pressure. Technical details about Project Zero wrist blood pressure monitor (BPM) are not fully available yet, but we do now the company is going through FDA approval, so contrary to gadgets with heat rate monitors […]

December 29, 2015December 29, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

F68 Sports Smartwatch Unboxing

Makibes F68 is a smartwatch with fitness features (HRM, pedometer…) and smartphone notification support, that is supposed to last around one week on a charge, and certified with an IP67 ingress protection rating. GearBest asked me if I wanted to review that model since SMA-Q watch was a disappointment, and I accepted so I have yet another smartwatch to try out. Today. I’ll take a few pictures of the watch and accessories, better writing a full review in one or two weeks. The package looks quite nice, but one detail is quite revealing: there’s no Makibes brand, nor F68 model name anywhere, and it looks exactly like FlyShark BW410 reported a few days ago by Charbax, so it must be an OEM design that will show up under multiple brand names, not only Makibes. The watch is not fully assembled, and instead the watch face comes with two watch bands, […]

December 17, 2015 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

How to Upgrade SMA-Q Smartwatch Firmware

I’ve started testing SMA-Q smartwatch, and so far I’ve had lots of issues with Bluetooth connectivity. The watch can rarely pair with my Android smartphone, and I was unable to enable features like Anti-lost and Sedendary alerts as the app would always report there was no connection. The company has sent me instructions to upgrade the firmware, and it seems to have improved things a little. So first you need to install SMA Services app by scanning the QR code on the user’s manual, or download the apk by following this link. Once this is done you can register, or skip registration. Now go to Setting, and select Connect watch. You should see a circle as on the left side above reading Searching watch, then Bluetooth Connecting, before seeing a message the connection was successful. You’ll probably them want to tap on Upgrade app, before tapping on Firmware upgrade (local […]

December 16, 2015December 18, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

SMA-Q e-Paper Smartwatch Unboxing and Details

When I first discovered SMA-Q smartwatch, I really found it interesting with its always-on color e-Paper display, Bluetooth 4.0 connectivity, heart rate monitor, and promise of 30-day battery life (standby) for just $56. GearBest send me one sample so that I can have a close look at this interesting smartwatch and fitness tracker. I’ll start by unboxing the watch, and checkout some details that were unclear in the specifications. I received it in a retail package that calls it SMA WATCH-Q instead of SMA-Q watch with a link to the official website. On one side we’ll get the specifications, all in Chinese, but even if you can read, it’s clear the watch supports Bluetooth 4.0 and Android 4.4+ IOS7.0+ as announced in the specs, and we also learned a 150mAh battery is included, and it’s compliant with IP65 ingrees protectin ratings meaning it’s “protected from total dust ingress and low […]

December 2, 2015December 2, 2015 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Omate Rise is a $199 3G and WiFi Smartwatch Powered by Mediatek MT2601 SoC (Crowdfunding)

Most smartwatches sold on the western markets are designed to be smartphone’s companions, and only come with Bluetooth LE connectivity, while we’ve seen many smartwatches (aka watchphones) with SIM card slot originating from China in the past, including the lower end No.1 D3 smartwatch which I reviewed recently. But this may be changing, as Omate is going to launch a new smartwatch called Omate Rise that will include 3G connectivity via a micro SIM card slot, as well as WiFi, Bluetooth Smart, and GPS. Omate Rise specifications: SoC – Mediatek MT2601 dual core ARM Cortex A7 @ 1.2GHz with ARM Mali-400 MP GPU System Memory – 512MB RAM Storage – 4GB flash Display – 1.3″ round muti-touch color display with 360×360 resolution (Innolux) Connectivity – Bluetooth 4.1 LE (A2DP profile), WiFi 802.11 b/g/n, GPS Cellular Connectivity – 3.5G HSDPA (2100/1900 MHz), GPRS / EDGE /GSM (850/900/1800/1900 MHz); micro SIM card […]

October 22, 2015December 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

SMA-Q Bluetooth Smartwatch Features a Color E-Paper Display, an Heart Rate Monitor… for $56 and Up

My Vidonn X5 activity tracker died on me a few weeks ago about over a year of service. While it was useful to keep me active thanks to its “steps” counter, I realized I was not a big fan of OLED displays as they aren’t turned on all the time in order to save power, and are hard to read when there’s a strong sunlight, the battery did not last that long (about 2 days), and using motion sensors to evaluate activity is not that accurate. So I’m interested in wearables with always-on displays, readable in sunlight, that don’t suck too much battery (e.g one charge per week), and with a strapless heart rate monitor. The first three are normally only achievable with E-Ink or E-Paper displays and the latter have become much more common thanks to electro-optical heart rate monitors. I’m also a budget conscious guy, so I’d like […]

October 21, 2015December 2, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Bluboo Xwatch is an Android Wear Smartwatch Powered by Mediatek MT2601 SoC

So far, we’ve only seen Android Wear devices by large companies such as Motorola, LG, or Huawei, simply because you have to sign an agreement with Google in order to be allowed to load Android Wear on your device. Last year, a startup launched their own “Android Wear” watch on Indiegogo, but when Google found out the campaign got pull out since it was not going to happen. But the situation may have changed since then, as I’ve been contacted by Bluboo, which should be brand from Shenzhen Huihua Exploit Technology Co., Ltd, about their upcoming Bluboo Xwatch sports smartwatch running Android Wear, and the company confirmed they were “working with a third-party company to help them get this agreement”. I’m guessing/hoping the third party company might be Mediatek themselves. Bluboo Xwatch preliminary specifications: SoC – Mediatek MT2601 dual core ARM Cortex A7 @ 1.2GHz with ARM Mali-400 MP GPU […]