yocto News - Page 4 of 42 - CNX Software

November 2, 2023November 2, 2023 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Rockchip roadmap reveals RK3576 and RK3506 IoT processors, Linux 6.1 SDK

The Rockchip RK3588 processor may remain the most powerful processor from the company for a while as an updated Rockchip IoT processor roadmap reveals the new RK3576 octa-core SoC and RK3506 tri-core Cortex-A7 chip, as well as a Linux 6.1 SDK to be released in Q4 2023. With the limited information we have, the Rockchip RK3576 looks to be a cost-down version of the RK3588 processor with eight cores, a 6 TOPS NPU, a 4K video codec, as well as PCIe and USB-C interfaces. Strangely the Rockchip RK3582 that should serve a similar purpose is not showing up in the roadmap. [Update: The RK3576 is indeed a lower-cost SoC but features four Cortex-A72 and four Cortex-A53 cores instead as per the comparison table reproduced below: That also means we now have the RK3576 specifications (some obtained from another document too): CPU Octa-core Arm processor with 4x Cortex-A72 cores at 2.2 […]

October 26, 2023October 25, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

The Portenta Hat Carrier board adds Raspberry Pi HAT support to the Portenta X8 SBC

The Arduino Portenta Hat Carrier board aims to interface the Linux-capable Portenta X8 board with the vast ecosystem of Raspberry Pi HAT (Hardware on Top) expansion boards. Introduced last year, the Arduino Portenta X8 is the first Arduino Pro hardware that can run Linux thanks to its NXP i.MX 8M Mini Arm Cortex-A53 quad-core processor. But it comes in a tiny 66.04 x 25.4 mm form factor which may be great for integration into products, but for prototyping or design of products such as IoT gateways, the company has now launched the Portenta Hat Carrier that enables the board to easily connect with the Raspberry Pi HATs available today. Portenta Hat Carrier specifications: Compatible with the Portenta X8 board and future Portenta with the same high-density connectors Storage – MicroSD card slot Camera I/F – MIPI CSI camera connector (CNXSoft: Arduino does not explicitly say whether it’s compatible with the […]

October 19, 2023October 19, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Generative AI on NVIDIA Jetson Orin, Jetpack 6 SDK to support multiple OSes

NVIDIA has had several announcements at ROSCon 2023 related to robotics & embedded with highlights including generative AI on the NVIDIA Jetson Orin module and the Jetpack 6 SDK will be released next month (November 2023) with supports for Ubuntu as usual, but also other operating systems and platforms such as Debian, Yocto, Wind River, Redhawk RTOS, and Balena. Generative AI on NVIDIA Jetson Orin There’s been a lot of hype in the last year about generative AI thanks to services such as ChatGPT, Google Bard, or Microsoft Bing Chat. But those rely on closed-source software that runs on powerful servers in the cloud. As we noted in our article about the “AI in a box” offline LLM solution there are some open-source projects such as Whisper speech-to-text model and Llama2 language models that could be run on embedded hardware at the edge, but as noted by some readers platforms […]

October 10, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

SECO Modular Vision HMI displays support Arm and x86 SMARC 2.1 modules

SECO has unveiled a new HMI family of smart displays called the “Modular Vision” with NXP i.MX 93 (Arm), NXP i.MX 8M (Arm), or Intel Elkhart Lake (x86) powered SMARC 2.1-compliant system-on-modules and a display size ranging from 7-inch up to 15.6-inch. The goal is to offer a flexible platform to customers who can select various display sizes (7-inch, 10.1-inch, or 15.6-inch currently) and a SMARC module that closely matches the product’s requirements for example for a standalone panel PC. SECO Modular Vision key features and specifications: SoC 7-inch model – NXP i.MX93 single or dual-core Arm Cortex-A55 @ 1.7 GHz, Arm Cortex-M33 @ 250MHz, Arm Ethos U-65 microNPU 10.1-inch model – NXP i.MX 8M Plus dual or quad-core Arm Cortex-A53 @ 1.8 GHz, Arm Cortex-M7 @ 800MHz, optional GPU/VPU/2.3 TOPS NPU 15.6-inch model – Intel Atom x6000E, Pentium, and Celeron N and J Series “Elkhart Lake” CPUs with Intel […]

October 5, 2023October 5, 2023 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

UP Squared i12 Edge is a compact, yet feature-rich, fanless Alder Lake-P mini PC

UP Squared i12 Edge is a compact fanless mini PC powered by 12th Generation Intel Alder Lake-P processors from the Celeron 7305E penta-core CPU up to an Intel Core i7-1270PE 12-core processor, but still a good range of ports and features. Based on the UP Squared i12 SBC introduced earlier this year, the UP Squared i12 edge mini PC comes with up to 16GB LPDDR5 RAM and features a 64GB or 128GB SSD soldered on board, plus an M.2 2280 NVMe socket and a SATA port for additional storage. The system also has two gigabit Ethernet ports, optional WiFi and Bluetooth, three 4K-capable display interfaces (HDMI, DisplayPort, USB-C), and three USB 3.2 Gen 2 ports. UP Squared i12 Edge specifications: 12th generation Alder Lake-P SoC: Intel Core i7-1270PE 12-core/16-thread processor @ up to 3.30GHz (E-cores) / 4.50GHz )P-cores) with 96EU Intel Xe graphics – PBP: 28W, up to 64W MTP […]

September 22, 2023September 22, 2023 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

AMD Kria K24 Zynq Ultrascale+ system-on-module targets motor control and DSP applications

The AMD Kria K24 System-on-Module (SOM) with a custom-built Zynq UltraScale+ MPSoC and the KD240 Drives Starter Kit are designed for the development of cost-sensitive industrial and commercial edge applications. The new Kria K24 is about half the size of a credit card and uses half the power of the larger, but connector-compatible, Kria K26 SOM that was introduced in 2021 for computer vision applications when the company was still known as Xilinx. That means existing K26 carrier boards can be reused with the Kria K24 SOM without modifying the PCB, but note there’s only one 240-pin connector on the new module, plus an extra 40-pin connector. AMD Kria K24 specifications: MPSoC – Custom-built Zynq Ultrascale+ XCK24 Quad-core Arm Cortex-A53 processor up to 1.3 GHz Dual-core Arm Cortex-R5F real-time processor up to 533 MHz Mali-400 MP2 GPU up to 600 MHz FPGA fabric with 154K logic cells AMD Deep Learning […]

August 28, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

SemiDrive D9-Pro (D9360) Arm Cortex-A55/R5 processor powers industrial CPU module for motor control

MYD JD9360 SemiDrive D9 Pro Development Board

MYiR MYC-JD9360 is a CPU Module powered by SemiDrive D9-Pro (D9360) processor with six Arm Cortex-A55 application cores, a dual-core lock-step Cortex-R5 real-time core along with a PowerVR GPU, 4Kp30 H.265/H.264 VPU and a 0.8 TOPS NPU, and designed for motion control and industrial applications. The MYC-JD9360 CPU module also comes with 2GB LPDDR4, 16GB eMMC flash, 16MB QSPI Flash, 256Kbit EEPROM, and exposes I/Os such as PCIe 3.0, USB 3.0, CAN FD, and TSN-enabled Gigabit Ethernet through a 314-pin MXM connector. The company also provides the MYD-JD9360 development board to quickly get started with the module and evaluate the solution. MYiR MYC-JD9360 CPU module with SemiDrive D9-Pro SoC Specifications: SoC – SemiDrive D9-Pro (D9360) CPU Application – Hexa-core Arm Cortex-A55 processor @ 1.6 GHz Real-time – Dual-core lock-step Cortex-R5 cores @ 800MHz GPU – Imagination PowerVR 9XM GPU @ 100 GFLOPS VPU – 4Kp30 H.265/VP8/VP9 video decoder, 4Kp30 H.264 […]

August 22, 2023August 22, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Getting started with VOIPAC IMX8M Industrial development kit (Yocto Linux SDK)

VOIPAC IMX8M Developer Kit Audio Testing

Last month I went through an unboxing of the VOIPAC iMX8M Industrial Development Kit with some specs and a quick try with the pre-loaded Yocto 3.1 Linux image. The kit is quite versatile with plenty of interfaces and headers, and eventually, it will support Android 12 and Ubuntu 22.04 LTS. but in the meantime, I played a bit with the Yocto Linux SDK for the NXP i.MX 8M board and will report by experience getting started with VOIPAC IMX8M Industrial development kit. WiFi antennas installation But before checking out Yocto Linux, I will install the two WiFi antennas since I did not do it last time around. We can attach the SMA connectors to the two metal plates on the side of the board securing them with the provided nuts and spacers. The other side of the antenna’s cable comes with a tiny u.FL (or is it MHF4) connector and […]