Month: December 2011

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on KT Keep In Touch Android Tablets

KT Keep In Touch Android Tablets

I’ve recently discovered some low cost tablets in one of the computer centers in Chiang Mai manufactured by a Thai company (SEC Intertech Thailand Co. Ltd) and sold under the “KT Keep In Touch” brand. They have their own shop in the center and sell exclusively those tablets as well as SD cards and 3G dongles. The prices range between 7,900 Baht to 9,900 Baht for 7″ Android 2.2 and 2.3 tablets, that’s equivalent to 250 USD to 315 USD. Those prices include VAT and all sort of custom duties that you may not get when you buy in other countries like the US, that means retail prices are usually 30 to 40% more expensive in Thailand compared to the US. The seller also had a 10″ tablet, but he looked like he did not want to show it to me as it was the an older model with resistive […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 19 Comments on Linux for Cortex M3 & M4 Microcontrollers

Linux for Cortex M3 & M4 Microcontrollers

There are plenty of low cost Linux development boards based on Cortex A8 or A9 such as the Beaglebone, as well as some devkits based on ARM7 and ARM9 such as SAM9 development kits , but if your application is cost and/or energy sensitive you can also switch to micro-controllers using Cortex M3 or M4 based development boards such as Emcraft SmartFusion devkits. You can run a functional uCLinux system with 1MB of RAM and 1MB of flash including the TCP/IP stack. You need to use uClinux and not directly Linux, because the Cortex M3 doess not have a Memory Management Unit (MMU) and only a Memory Protection Unit (MPU). This can bring some interesting software development challenges such as (apparently random) kernel panics, the lack of fork, memory fragmentation and more. You can check out http://kernel.org/pub/linux/libs/uclibc/Glibc_vs_uClibc_Differences.txt for the main differences between uClibc and Glibc. The instructions to patch and […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Myriad Alien Vue Brings Android to Your TV

Myriad Alien Vue Brings Android to Your TV

Myriad Group, a company based in  Switzerland,  brings Android (and a Google TV alternative) to non-Android platforms through its Alien Davlik technology, called Myriad Alien Vue. Alien Vue is a solution that enables TV service providers to add apps to their existing managed service offerings, in order to respond to over-the-top (OTT) content distribution channels from Apple, Google and others. It is compatible with apps developed using HTML5 and most Google TV apps such as YouTube, Netflix and Twitter apps. The release includes an app store developed in conjunction with AppCarousel that can be fully be customized / branded by service providers. Myriad Alien Vue also supports additional plug-in components like Myriad Connect & Share, providing multi-screen functionality for personal and premium content. Alien Vue allows to leverage existing TV and set-top box equipment and works with mobile phones and tablets to give users control over their TV experience. Alien […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Advantech Announces COMs, SBCs, Motherboards and Embedded PCs based on Intel Atom N2000 and D2000 Series

Advantech Announces COMs, SBCs, Motherboards and Embedded PCs based on Intel Atom N2000 and D2000 Series

Advantech has updated its product range by adding Computer On Modules (COMs). single board computers (SBCs), industrial motherboards and embedded box PCs based on the latest Intel Atom N2000 and D2000 Series processors to its offerings. These low-power embedded platforms provide energy-efficient solutions, and serve a wide range of applications targeted at handheld devices, POS, kiosks, digital signage, medicine, and factory automation. Computer On Modules: SOM-7565 and SOM6765 The Advantech COM-Express Mini SOM-7565, with a mere 84 x 55 mm board size, benefits the low power consuming handheld devices market. SOM-7565 Key Features: PICMG COM R2.0 compliant module for Intel Atom processors N2600 Intel gfx support for DirectX 9 and Open GL 3.0 Supports 18-bit LVDS, eDP/HDMI/DVI/DisplayPort Onboard 2 GB DDR3 800 memory and 4 GB SSD Supports 3 PCIe x1, LPC, SMBus, I2C Bus, SATAII, 8 USB2.0, and GbE Supports Advantech iManager 2.0 and software APIs The COM-Express Compact […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 12 Comments on AllWinner A10/A1X Processor Resources, Development Board and SDK

AllWinner A10/A1X Processor Resources, Development Board and SDK

AllWinner A10 (part of A1X series) is an ARM Cortex A8 SoC targetting multimedia products such as tablets, HD STB or digital signage. It is currently found in some low cost Android tablets such as Momo9C and will be used in Rhombus Tech’s Raspberry Pi alternative. The processor features an ARM Cortex A8 clocked at 1.5 Ghz with a Mali-400 GPU. It can support 1080p encoding/decoding, provides HDMI, Component, Composite, VGA and LVDS video outputs,  USB2.0 ports, a SATA 2.0 port and more… Here are the key features of the Allwinner A10: VPU (Video Processing Unit) HD Video Decoding (Super HD 2160P/3D Film) Support all popular video formats, including VP8, AVS, H. 264 AVC, VC-1, MPEG-1/2/4, … HD Video Encoding (H.264 High Profile) Support encoding in H.264 format DPU (Display Processing Unit) MULTI-CHANNEL HD displays Built-in HDMI YPbPr, CVBS, VGA LCD interfaces: CPU, RGB, LVDS up to Full HD Memory […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Android Drivers Will Be Included in Linux Kernel 3.3

Android Drivers Will Be Included in Linux Kernel 3.3

The Android drivers were no longer accepted in the mainline Linux kernel, starting with Linux kernel 2.6.33, as announced by Greg Kroah-Hartman back in spring 2010. But this is about to change, as it appears that Greg Kroah-Hartman will include the Android drivers into his development branch for the upcoming Linux kernel 3.3, making it boot on Android devices without being patched. The Linux Foundation’s Consumer Electronics workgroup, along with a group at Linaro and various individual developers, is working with Kroah-Hartmann on this project. Tim Bird, chair of the Architecture Group, announced the Android Mainlining Project on the 20th of December with the goal of coordinating work on integrating the Android features. Further information on this project is available on the wiki and developers can also sign up for the project’s mailing list to join the 15 other persons involved in the project. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Linaro 11.12 Release with Kernel 3.1.5

Linaro 11.12 Release with Kernel 3.1.5

Linaro has just released version 11.12 based on Linux Kernel 3.1.5 and further support for Android 4.0 including graphics hardware acceleration on Snowball and Origen development boards. Here are the highlights of the release: Android Linaro ICS is built with the Linaro toolchain. Linaro ICS is running on all supported boards. DS-5 with Gator is supported in all Linaro Andoid ICS builds. The latest version of libpng (1.5.7) has been integrated in Linaro ICS. An AOSP master build is now available from linaro. ARM® Mali™ Hardware Accelerated Graphics is supported on Origen and Snowball. libjpeg-turbo has been integrated into all Andoid ICS builds. Developer Platform The linux-linaro and lt-panda kernel packages are now automatically generated by the CI build scripts DS-5 with Gator is supported in all Ubuntu LEB builds. XBMC packages, with Gstreamer and OpenGLES support, are now available at the Ubuntu Overlay (supporting only Panda initially) U-Boot-Linaro is […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Android 4.0 on Archos 70 G8 Tablet

Android 4.0 on Archos 70 G8 Tablet

“LeTama” has ported Android ICS to Archos G8 Tablet based on OMAP3630. The video below shows Android 4.0 running on Archos G8 70S. The user interface seems a bit sluggish at times, but this is an alpha version with only 3D/Touchscreen working and more work needs to be done to have a fully functional release. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com