uClinux Running on Freescale Kinetis K70 MCU (Cortex-M4) Module

Last year, I posted about Linux for Cortex M3 & M4 Micro-controllers and noted it was difficult to find cost effective Cortex-M based boards able to run uClinux or Linux (RAM being the main issue).

Freescale TWR-K70F120M  is a module based on Kinetis K70 MCU (Cortex M-4) with plenty of RAM (128MB) to run Linux or uClinux. It is available for 109 USD or 179 USD with Freescale Tower system (TWR-K70F120M-KIT).

Cortex-M4 module with 128 MB RAM
Freescale Kinetis K70 Module (Click to Enlarge)

Here are the key features of the module:

  • Freescale MK70FN1M0VMJ12 Cortex-M4 MCU @ 120 MHz (Product Brief)
  • Touch Tower Plug-in Socket
  • General purpose Tower Plug-in (TWRPI) socket
  • On-board JTAG debug circuit (OSJTAG) with virtual serial port
  • 128 MB DDR2 SDRAM memory
  • 256 MB SLC NAND flash memory
  • Three axis accelerometer (MMA8451Q)
  • Potentiometer
  • Micro-SD Card slot

I could not find an open source uClinux implementation for Kinetis K70, but emCraft has a Linux Board Support Package (BSP) for the Freescale TWR-K70F120M-KIT hardware platform available for 99 USD.

They have just uploaded a video of Kinetis K70 Tower Kit running uClinux 2.6.33 (with busybox) + u-boot with an ultra fast boot time (about 2 seconds) and showcasing a few capabilities of the system including:

  • IP stack support
  • ssh server (dropbear)
  • http server
  • nfs support
  • jffs2 support

Vladimir Khusainov, Founder of Emcraft Systems, also mentioned they benchmarked this setup with drystone:

Linux (uClinux) runs just beautifully on this device. Using ‘dhrystone’, we get about 50% performance we get on a 250Mhz Freescale PowerPC box. Fast boot-up, lots of RAM (the TWR-K70 module provides 128MB of RAM and 256MB of NAND Flash), networking, JFFS2, framebuffer, SSH, HTTPD, Qt/E – all this runs just fine on K70. Overall user experience is your regular “embedded Linux” on an MMU-full microprocessor.

You can get more information on Freescale Kinetis K70 MCU Module page and Emcraft Freescale TWR-K70F120M-KIT BSP page.

Share this:

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK Pi 4C Plus
Subscribe
Notify of
guest
The comment form collects your name, email and content to allow us keep track of the comments placed on the website. Please read and accept our website Terms and Privacy Policy to post a comment.
2 Comments
oldest
newest
Khadas VIM4 SBC