Raspberry Pi Now Has Experimental Support for VP6, VP8, MJPEG and Ogg Theora Video Codecs

The guys working on the Raspberry Pi (mainly dom) have added preliminary support for VP6, VP8, MJPEG, and Ogg Theora free video codecs, as well as Ogg Vorbis audio codec. Unlike H.264, MPEG-2 and VC1, those are not handled by the hardware video decoder in Broadcom BCM2835 processor, but are accelerated by the Videocore GPU. This means that only SD (and possibly 720p) videos are supported for those codecs.

480p VP8 Video Playback in the Raspberry Pi
480p VP8 Video Playback in the Raspberry Pi

The best way to get support is probably to patiently wait for the Raspberry Pi foundation to release a new Raspbian image, but in case you couldn’t possibly wait, here are the steps to follow:

  1. Download and run Hexxeh’s rpi-update script in the Raspberry Pi in order to get the very latest build:
  2. Add the following two lines to /boot/config.txt:
  3. Reboot the Raspberry Pi
  4. The GPU firmware is now updated, but you still need the latest version of omxplayer. You  have two choices:
    1. Wait for the next build to be available on http://omxplayer.sconde.net/ (should be there in a few days).
    2. Build it yourself.
  5. I chose number 2 :). We’ll cross-compile omxplayer since we don’t have all day (and maybe more). First get the Rpi toolchain in a Linux build machine (Ubuntu 12.04 64-bit in my case):

    mkdir -p /usr/local/bcm-gcc
    pushd /usr/local/bcm-gcc
    sudo git clone git://github.com/raspberrypi/tools.git
    export PATH=$PATH:/usr/local/bcm-gcc/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin
    popd

  6. We need a root file system for the build. Since we may need to install missing packages, I’ll run an NFS server in the Raspberry Pi and access the rootfs via NFS. So let’s configure the Raspberry Pi as a NFS server first:

    Then edit /etc/exports as root (sudo) and add the line:

    Then restart the NFS server
  7. Now let’s mount the NFS share in the build machine:
  8. Let’s retrieve omxplayer source code:
  9. Modify Makefile.include as follows:
    USE_NFS=1
    FLOAT=hard
    ifeq ($(USE_NFS), 1)
    NFSROOT :=/home/jaufranc/edev/rpi/nfs
    SDKSTAGE :=$(NFSROOT)
    TARGETFS :=$(NFSROOT)
    TOOLCHAIN :=/usr/local/bcm-gcc/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian
    HOST :=arm-linux-gnueabihf
    SYSROOT :=$(NFSROOT)
    else
    BUILDROOT :=/home/jaufranc/edev/rpi/bcm-rootfs
    SDKSTAGE :=/home/jaufranc/edev/rpi/bcm-rootfs
    TARGETFS :=/home/jaufranc/edev/rpi/bcm-rootfs
    TOOLCHAIN :=/usr/local/bcm-gcc/tools/arm-bcm2708/arm-bcm2708hardfp-linux-gnueabi
    HOST :=arm-bcm2708hardfp-linux-gnueabi
    SYSROOT :=$(TOOLCHAIN)/tools/arm-bcm2708hardfp-linux-gnueabi/sysroot/
    endifJOBS=8CFLAGS := -isystem$(PREFIX)/include
    CXXFLAGS := $(CFLAGS)
    CPPFLAGS := $(CFLAGS)
    LDFLAGS := -L$(BUILDROOT)/lib
    LD := $(TOOLCHAIN)/bin/$(HOST)-ld –sysroot=$(SYSROOT)
    CC := $(TOOLCHAIN)/bin/$(HOST)-gcc –sysroot=$(SYSROOT)
    CXX := $(TOOLCHAIN)/bin/$(HOST)-g++ –sysroot=$(SYSROOT)
    OBJDUMP := $(TOOLCHAIN)/bin/$(HOST)-objdump
    RANLIB := $(TOOLCHAIN)/bin/$(HOST)-ranlib
    STRIP := $(TOOLCHAIN)/bin/$(HOST)-strip
    AR := $(TOOLCHAIN)/bin/$(HOST)-ar
    CXXCP := $(CXX) -E

    PATH := $(PREFIX)/bin:$(BUILDROOT)/output/host/usr/bin:$(PATH)
    CFLAGS += -pipe -mfloat-abi=$(FLOAT) -mcpu=arm1176jzf-s -fomit-frame-pointer -mabi=aapcs-linux -mtune=arm1176jzf-s -mfpu=vfp -Wno-psabi -mno-apcs-stack-check -O3 -mstructure-size-boundary=32 -mno-sched-prolog
    LDFLAGS += -L$(SDKSTAGE)/lib -L$(SDKSTAGE)/usr/lib -L$(SDKSTAGE)/opt/vc/lib/
    INCLUDES += -isystem$(SDKSTAGE)/usr/include -isystem$(SDKSTAGE)/usr/include/arm-linux-gnueabihf -isystem$(SDKSTAGE)/opt/vc/include -isystem$(SYSROOT)/usr/include -isystem$(SDKSTAGE)/opt/vc/include/interface/vcos/pthreads -isystem$(SDKSTAGE)/usr/include/freetype2

    You’ll need to change NFSROOT variable to where you mounted the NFS share.

  10. We’re now ready to cross-compile omxplayer:

    This will create a omxplayer-dist.tar.gz that you can copy in the Raspberry Pi:

    There may be missing dependencies during the build. If it’s the case, you need to install some development package in the Raspberry Pi. Refer to my “How-to fix common build error tutorials“, if the build fails.
  11. Back to the Raspberry Pi, let’s install it:

That’s all. Now we can try the files tested by dom:

e.g.: omxplayer big_buck_bunny_trailer_480p

The VP8 and Ogg Theora videos played very smoothly, but I just got a black screen for VP6 and MJPEG videos. since it could not detect the video stream. The firmware has been fixed for VP6 support, and omxplayer for MJPEG support, so all 4 files can now play.

If you don’t want to build omxplayer by yourself, you can download the binary I’ve built: omxplayer-dist.tar.gz.

Share this:

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK Pi 4C Plus
Subscribe
Notify of
guest
The comment form collects your name, email and content to allow us keep track of the comments placed on the website. Please read and accept our website Terms and Privacy Policy to post a comment.
9 Comments
oldest
newest
Ahto
Ahto
11 years ago

Thanks for these instructions. Been compiling omxplayer *on* the pi for couple of hours now because I couldn’t get cross compiling to work. CTRL+C’d that and now happily compiling with all my cores 😀

Be sure to add /usr/local/bcm-gcc/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin to your PATH
or you can’t compile ffmpeg.

jamis
11 years ago

Thank you for posting this! I wish it were higher in googles results because your instructions are a lot more helpful then most of the other tutorials I’ve seen.

Also, this usage of NFS is SO much cleaner then trying to boot the Raspberry Pi off of a NFS server somewhere else. This way, you can use you’re existing raspberry pi install. You don’t have to mess around with building another SD card.

Beautifully done! If only the omxplayer repo on github had these kinds of instructions…

HardwareHaquer
11 years ago


I know this is a few months old, but you might want to remind people that if they add “export PATH…” to .bashrc they will need to “source ~/.bashrc” in whichever terminal window they plan to run make from to help reduce some frustration 😉

Also thanks a lot for posting this.

jviyer
jviyer
10 years ago

Thanks a lot for this. I have run into this problem at the NFS step: I get a number of lines about “could not open…..for tcp6” Also on the client I get “access denied by server” I looked t dmesg on pi and there is no sign my client was trying connection ======================================== pi@raspberrypi ~ $ sudo /etc/init.d/nfs-kernel-server restart [ ok ] Stopping NFS kernel daemon: mountd nfsd. [ ok ] Unexporting directories for NFS kernel daemon…. [ ok ] Exporting directories for NFS kernel daemon…. [….] Starting NFS kernel daemon: nfsdrpc.nfsd: address family inet6 not supported by protocol TCP… Read more »

jviyer
jviyer
10 years ago

Sorry. When I changed the
/ 192.168.0.0/24(rw,no_root_squash,async,no_subtree_check)
to

/ 192.168.1.0/24(rw,no_root_squash,async,no_subtree_check)

it worked. I had not paid attention to that.
Please ignore previous request

jviyer
jviyer
10 years ago

I have the PATH exported and it is there but it complains.
config.log output on ffmpeg make:
PATH=’/bin:/output/host/usr/bin:/bin:/output/host/usr/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/bcm-gcc/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin

arm-linux-gnueabihf-gcc -D__STDC_CONSTANT_MACROS -D__STDC_LIMIT_MACROS -DTARGET_POSIX -D_LINUX -fPIC -DPIC -D_REENTRANT -D_HAVE_SBRK -D_LARGEFILE64_SOURCE -DHAVE_CMAKE_CONFIG -DHAVE_VMCS_CONFIG -D_REENTRANT -DUSE_VCHIQ_ARM -DVCHI_BULK_ALIGN=1 -DVCHI_BULK_GRANULARITY=1 -DEGL_SERVER_DISPMANX -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D__VIDEOCORE4__ -DGRAPHICS_X_VG=1 -U_FORTIFY_SOURCE -Wall -DHAVE_OMXLIB -DUSE_EXTERNAL_FFMPEG -DHAVE_LIBAVCODEC_AVCODEC_H -DHAVE_LIBAVUTIL_MEM_H -DHAVE_LIBAVUTIL_AVUTIL_H -DHAVE_LIBAVFORMAT_AVFORMAT_H -DHAVE_LIBAVFILTER_AVFILTER_H -DOMX -DOMX_SKIP64BIT -isystem/home/jv/edev/rpi/nfs/usr/include -isystem/home/jv/edev/rpi/nfs/usr/include/arm-linux-gnueabihf -isystem/home/jv/edev/rpi/nfs/opt/vc/include -isystem/home/jv/edev/rpi/nfs/usr/include -isystem/home/jv/edev/rpi/nfs/opt/vc/include/interface/vcos/pthreads -isystem/home/jv/edev/rpi/nfs/usr/include/freetype2 -mfpu=vfp -mfloat-abi=hard -mno-apcs-stack-check -mstructure-size-boundary=32 -mno-sched-prolog -mcpu=arm1176jzf-s -c -o /tmp/ffconf.JLOXdiwr.o /tmp/ffconf.JhnDbRzw.c
./configure: 728: ./configure: arm-linux-gnueabihf-gcc: not found
C compiler test failed.
============
I can figure why it cant find it since it is there in the directory (it is linked to gcc-4.7.2

Khadas VIM4 SBC