New ARM Set-Top Box SoCs – Sigma Designs SMP8734 / SMP8756, STMicro STiH312 / StiH412, and Entropic EN7310 (Videos)

Broadcom and STMicro has the two companies that dominate the set-top box SoC market with respectively 44.7% and 34% market share by revenue in 2012, followed by Ali, a distant third at 6.9%. Other companies include Entropic, who has acquired Trident Systems, (4.4%) and Sigma Designs (1.4%) which has suffered in recent years. MIPS was the predominant architecture in the STB SoC market, but with the advent of Android, most companies have announced ARM based STB SoC for better compatibility with Android apps. TV Connect 2014, an event gathering stokeholder involved in Connected TV such as STB manufacturers, content providers, and SoC vendors, took place on March 18-20 in London, and Charbax, armdevices.net, interviewed three companies who promoted their latest ARM based STB SoCs:

  • Sigma Designs with their SMP5734 & SMP8756/58 SoCs featuring single or dual cores Cortex A9 and a Mali-400 GPU
  • STMicro with their STiH312 Cannes and STiH412 Monaco SoC both featuring a dual core ARM Cortex-A9 with a Mali-400MP4 GPU
  • Entropic with their EN7310 featuring ARM Cortex-A9 cores (1 to 4) and a Mali-400 GPU

Sigma Designs SMP8756

Sigma Desigms SMP8756 was announced at CES 2014. It is part of the company’s new SMP8750 series SoC, supports 4K2K and HEVC, broadcast TS processing, secure media processing, multi-format Full-HD video decoding, VXP display processing and certification of CAS technologies (Verimatrix and Nagravision) are planned. Sigma previous secure media processors, which are still in used in new design today, were all based on MIPS, and this is their first ARM based SoC. SMP8734 is a least powerful version without support for 4K.

Android and Linux SDKs are both available. The Android SDK is based on Android 4.2 with support for OpenMAX, OpenGL ES 2.0, DVB software stacks, and hybrid STB API for support for tuners and demodulators. DTV middleware stacks and IPTV middleware ports, such as Netgem middleware for IPTV & VoD and OpenTV. Hardware reference platform are also available.

In the video below, we can see SMP8734 Vantage reference platform running Android, as well as SMP8756 showing 4K2K decoding and playback.

Products basedon SMP8734 should be available in Q4 2014, and SMP5756/SMP5758 in Q2 2015. There’s still no SMP8700 series page on Sigma Designs website.

STMicroelectronics STiH312 Cannes and STiH412 Monaco

STiH312ST Micro switch to ARM from SH-4 architecture back in 2011, and I’ve already wrote about StiH416 dual core cortex A9 SoC and its development resources last year. THe company has now announced two other ARM based SoC with StiH312 (Cannes) and STiH412 (Monaco) dual core processors which support Ultra HD, HEVC video decoding & encoding, video transcoding, concurrent conditional access and DRM, USB 3.0, PCI-e, SATA and Gigabit Ethernet, and more. The SoC interfaces allow for MoCA 2.0 (Multimedia over Coax Alliance), DOCSIS 3.0 (Data Over Cable Service Interface Specification), satellite, 802.11ac Wi-Fi, etc… Their processor runs Android, “Google TV”, as well as Cisco & Nagra solutions, and the Cable RDK.

You can find limited information on STiH312 and STiH412 products page. The video itself has limited interested, but here’s the link if you want to find out more.

Entropic EN7310

Entropic EN7310 features one to four ARM Cortex A9 cores, a Mali-400 GPU, and is designed for satellite STBS with dual DVB-S/S2 cable reception capability, MoCa 2.0 support, HEVC decode up to 1080p60, and DRM. They also have EN730x family for cable, satellite, and IPTV that’s designed for Hybrid STBs, but it’s not shown in the videos.

In the video we’ll find an HDMI stick and a development board based on EN7310, as well as Eagle Kingdom Technologies (EKT) DCP5205 (5:10 in the video), a nice and small set-top box (based on EM730x?) that you can plug directly into your wall socket (no power adapter, no power cable) with a connector for cable, HDMI output, and Wi-Fi that comes with an RF remote. The box runs Solid TV middleware. It’s a full STB, still a prototype, and should hit the market later this year.

There’s some more details on Entropic EM730x page.

Share this:

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK Pi 4C Plus
Subscribe
Notify of
guest
The comment form collects your name, email and content to allow us keep track of the comments placed on the website. Please read and accept our website Terms and Privacy Policy to post a comment.
10 Comments
oldest
newest
anon
anon
9 years ago

Sure it’s nice that quite a few ARM chip can decode 4k2k video (let it be h.264, h.265 etc.) since the A10/CedarX, but where are the chips that could actually output all that glorious UHD/4k @ 30Hz/60Hz video?

Let it be DisplayPort, or at least fully utilize those HDMI 1.4a (2.0 still MIA) standard, ports.

Harley
Harley
9 years ago

I believe that Sigma Designs’s NDA (Non Disclosure Agreements) and TOU (Terms Of Use) for their their SDK and code libraries are still way too restrictive for use by free and open source software. At least previous I think it that is the reason that they still do not support any FOSS media player like XBMC yet. I think that Sigma Designs would be much more interesting SOC hardware if they fully supported XBMC, and now if they will expose OpenMAX IL hardware acceleration on VPU via Android’s new standard MediaCodec API then that should hopefully be possible. http://developer.android.com/reference/android/media/MediaCodec.html Funny… Read more »

The Cageybee
The Cageybee
9 years ago

Argh. Does anyone else find Charbox annoying?
He doesn’t seem to know what he’s talking about half the time and ends up asking pointless questions that the interviewees just seem baffled by.
Case in point, in the Entropic video, Charbox doesn’t understand the difference between ‘open standards’ and ‘open source’. Really?
How can this guy run a tech blog?

The Cageybee
The Cageybee
9 years ago

Back on topic.
It’s good to see the STB chip manufacturers giving ARM some love.
As someone who has tried to get DVB running on various ARM systems it can be very hit and miss. Mainly miss.
Hopefully some of there work re drivers will filter back to the community and make things easier.

Harley
Harley
9 years ago

The Cageybee :
As someone who has tried to get DVB running on various ARM systems it can be very hit and miss. Mainly miss.
Hopefully some of there work re drivers will filter back to the community and make things easier.

Marusys PrismCube is a newish ARM based DVB-S2 with Linux and XBMC

You also have competing “MK-Digital Cube” and “D-Cube R2” DVB boxes

passante
passante
9 years ago

I still don’t get if this middleware supports android apps or not.
p.s. Cageybee your are not alone, it’s a pain.

Dan
Dan
9 years ago

@The Cageybee
LoL yeah Charbox comes off a bit mentally unstable, I’m not trying to be mean to the guy but there is definitely something wrong with him.

Dan
Dan
9 years ago

Sigma Designs actually commissioned some XBMC team people (Scott Davilla) to port XBMC to one of their MIPS chips a few years back so there is a Sigma video decoding pipeline in existence which theoretically could put it on a better playing field with Android where XBMC taps the Sigma hardware decoders bypassing libstatefright/mediacodec systems. This would put it in the same league as Amlogic which does the same but Sigma’s video decoders are still way better than most, Amlogic have closed the gap but Sigma still have an edge in that it will play almost everything even the oddball… Read more »

The Cageybee
The Cageybee
9 years ago


Agreed, he does seem to get about to shows that no one else covers.
Also, I certainly wouldn’t be able to do that sort of thing not in my native language.

Khadas VIM4 SBC