WeTek Hub Android & OpenELEC TV Box Features Amlogic S905-H Revision C Processor

WeTek has been working not on one, but two four new devices recently. I’ve already covered WeTek Play 2S (previously known as WeTek Play+) based on Amlogic S905 Rev. C , running Android 5.1 or OpenELEC, and featuring digital TV tuners (ATSC, DVB-S2, DVB-T2/C), which should become available in Q2 2016. The company has unveiled another model called WeTek Hub with features closer to the ones found in other Amlogic S905 TV boxes I’ve reviewed so far, except it is based on Amlogic S905-H revision C,  comes with Widewine and Microsoft PlayReady DRM, and supports both Android 5.1.1 and OpenELEC.

WeTek_Hub

WeTek Hub specifications:

  • SoC –  Amlogic S905-H revision C quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz
  • System Memory – 1 GB DDR3
  • Storage – 8 GB eMMC flash + micro SD card slot
  • Video & Audio Output – HDMI 2.0 up to 4K @ 60Hz with HDCP 2.2 support
  • Video & Audio Playback – 10-bit H.265, H.264 up to 4K @ 60 Hz, Dolby TrueHD and DTS HD pass-through
  • Connectivity – Gigabit Ethernet, 802.11 b/g/n/ac Wi-Fi and Bluetooth 4.0
  • USB – 1x USB 2.0 host port
  • DRM – Microsoft Playready and Widewine Level 1, HDCP
  • Misc – IR receiver + external IR support
  • Power Supply –  TBD
  • Dimensions – 71 x 71 x 20 mm

The device is said to dual boot Android 5.1.1 and OpenELEC, with Ubuntu Linux likely supported by the community. Amlogic S905-H has the advantage of having DTS and Dolby licenses so audio should work in all apps, and revision C of the silicon fixes freezes and artifacts with some 4K 10-bit H.265 video streams (e.g. DVB-S2). The DRM will allow for full HD video streaming in apps like Netflix. The device is also really small, for example I know have MXQ-4K on my desk, another TV box based on Amlogic S905 processor that measures 117 x 117 x 27 mm, and does not really feel big either.

WeTek_Hub_OpenELEC_Android

WeTek Hub will ship with a power adapter, an HDMI cable, a remote control, an IR extension cable, a plastic bit for firmware update, and a warranty card. The IR extension cable will allow you to place the box behind the TV (mounting bracket are also provided or available), or hidden in your cabinet. Price is rumored to be between $70 and $90, and the device will start selling at the end of April.

Beside WeTek Play 2S and WeTek Hub, the company will soon launch WeTek Streamer and WeTek Streamer 4K featuring WeTek IPTV application (Stalker, Xtream Codes) and respectively powered by Amlogic S805 and S905.

Share this:

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK Pi 4C Plus
Subscribe
Notify of
guest
The comment form collects your name, email and content to allow us keep track of the comments placed on the website. Please read and accept our website Terms and Privacy Policy to post a comment.
28 Comments
oldest
newest
Bri Smith
Bri Smith
8 years ago

$1,000,000.00 question. Will OpenElec be available for all amlogic s905? I have 2. Tronsmart Vega Telos s95. And just got the Minix neo u1.
Who has the answer? Github, freaktab etc….
Love your articles.

Bri Smith

theeuwke
theeuwke
8 years ago

@Bri Smith

That depends on the vendor or the community. Amlogic provides an Linux SDK so you can port openelec.
Wetek is the only company that has openelec support.
For the Beelinx Mini Mx a build by amlinuxmedia is available: http://amlinuxmedia.com/forum/index.php?topic=13.0 and a number of ther boxes: http://amlinuxmedia.com/forum/index.php?board=5.0

Bri Smith
Bri Smith
8 years ago

Thanks for these links theeuwke.

Ron
Ron
8 years ago

Pity Wetek didn’t wait for AMLogic S905X, which supports VP9.

And it seems weird that they would launch 4 new devices. Maybe these are just prototypes, and only one of them would become commercial?

Ron
Ron
8 years ago

: here is a useful informative comparison table of all these new models. you should publish it here.
http://imagizer.imageshack.us/v2/xq90/923/79VGOy.jpg

source: http://wetekforums.com/v/index.php?p=/discussion/27179/new-wetek-4k-boxes-introduction-in-cabsat-fair-dubai

The Play2s is the flagship model, and it has tuner. it has 2GB ram, 16GB rom (+mSata) and a qwerty remote/air mouse.
it seems that it doesn’t have AV output. pity…

natsu
natsu
8 years ago

@Ron
hopping that wetekplay 2 will be affordable comparing to the flagship 2S

Ron
Ron
8 years ago

It’s quite ironic that since the first time we heard that Wetek is going to use S905-H in its future device – something that haven’t happened yet – Xiaomi had already started and finished using the same SoC on its Mi Box 3, and had already replaced it with another SoC (by Mediatek) on an updated Mi Box 3 Enhanced… A whole life-cycle of a media box using the same SoC, during the long preparations of Wetek for utilising it in its upcoming device! Does this imply something about Wetek and Xiaomi and the differences between them? Can we conclude… Read more »

Rod Gray
Rod Gray
8 years ago

@Ron
Here we go again. Yet more false information.

http://imagizer.imageshack.us/v2/xq90/923/79VGOy.jpg

Both new Play versions show Ubuntu Linux in the Software box, along with the Core and Hub. Yet they tell you in the forums it is a community assumed and driven support. That is 100% false advertising. Upsetting to see false claims like that. I could get Ubuntu Linux support on my Nexus Player using that logic, but only if the community gets involved. You could say that for practically any device. That’s false advertising no matter how you look at it. Very upsetting

cybertingred
cybertingred
7 years ago

Hello everyone, I have a Tmall magic-box M13 with S905-B processor(I don’t know what revision it is, I teardown the box and comfirm the processor name end with B). I use buildroot from amlogic http://openlinux.amlogic.com:8000/download/ARM/filesystem/arm-buildroot-2015-12-25-05d8ead338.tar.gz to build the kernel, and use dtb file extracted from stock firmware to boot, but it end with kernel panic and hang. I think the kernel source is not compatible with the processor S905-B, or some special configs I ignore. Can you help me to build a kernel that can run on S905-B?

Leslie Meyer
Leslie Meyer
7 years ago

Hello, I look now no longer the
the SoC 905 vs SoC 905x, it is not with the Armlogic 905 possible sound packages unchanged to send to the av-receiver via HDMI cable and let there be decoded? And the av-recheiver dec Dts-HD or Dolby digital. I need now for a S905x?
Thank you very much

Leslie Meyer
Leslie Meyer
7 years ago

cnxsoft : @Leslie Meyer Beide Amlogic S905 und S905X können Audio – HD – Pass-Through unterstützen. Thanks for the answer, if the Amlogic S905 / S905x DTS-HD / DD-HD sound can forward via HDMI pass, then accordingly falls for Amlogic at any licenses? The Amlogic S905x therefore only has a better sound through the analog output due to the DAC? Can it be that the Rockchip RK3288 is a better choice than the Amlogic S905, because he can play more formats? I am surprised very because it is more favorable, and even less support gets at least some adjustments was… Read more »

Leslie Meyer
Leslie Meyer
7 years ago

I have the Nvidia Shield TV and Beelink MX Mini III in the latter I have no HD audio via HDMI pass. hinbekommen in the shield portable TV already. The advantage of “DTS and Dolby licenses” So is that the S905-H, “unzip” the DTS and Dolby packets themselves can, and sends via PCM on the TV or digital (optical connected speakers? ` Thanks for the clear up to the RK3288 chip, I had wondered that the $ 20 device play at Youtube as many … 10bit / VP9 …. I think in addition to the shield portable TV is himedia… Read more »

Ned Scott
Ned Scott
7 years ago

Huh, that’s not good. That sounds like something might be defective with that unit itself. It’s certainly not bugless at this point, but hanging that often and being generally slow could be a heat issue, which isn’t typical from the other people who’ve been testing the Hub. If someone else from WeTek hasn’t reached out to you yet, feel free to poke me at ned at wetek dot com.

xxx
xxx
7 years ago

CNX

When we to expect test of the wetek hub?Did they send you new sample?

Theguyuk
Theguyuk
7 years ago

This Post needs updating that soc only does 1.5 GHz..

arprip
7 years ago

WeTek Play 2 with DVB-S2 option has missed now.
Only DVB-C/T2 and ATSC can be selecting.

anotherone
anotherone
6 years ago

whats the difference between 905-d and 905-h ?

Did we wait some new amlogic cpus?
I see the alwiner now it have 6k support..

anotherone
anotherone
6 years ago

I understand about 6k..
I just asked if there is something like an answer.. a new cpu from amlogic.
You think we have a lot of time for new generation cpus from amlogic?

Khadas VIM4 SBC