Mediatek MT2533D is a Bluetooth 4.2 SiP for Smart Headphones & Hands-Free Systems

There used to be a time when most products were based on a general purpose MCU or processor that you would interface to over chips like audio codecs, memory chips, flash storage, etc…, but in order to cut costs, application specific SoCs have become quite common over the year, so we’ve had mobile application processors for several years already, but more recently we got “wearables” SoCs and “Smart Home” SoCs, and Mediatek has launched MT2533D “headphone” SiP (System-in-Package) combining a Cortex-M4 MCU, 4MB PSRAM, an audio codec, and a dual mode Bluetooth subsystem.

mt2533-block-diagramMediatek MT2533D specifications:

  • MCU –  ARM Cortex-M4 @ up to 208MHz with 32KB L1 cache, FPU, MPU, AES 128/192/256 crypto engine and TRNG
  • Memory – 160kB SRAMs, 4MB pseudo SRAM
  • Storage – 4MB flash
  • Wireless Connectivity – Bluetooth 4.2 dual mode (classic and low energy)
  • Audio
    • AAC/SBC for Bluetooth audio
    • CVSD/mSBC for Bluetooth speech
    • PCM playback: 8-48kHz sample rate
    • PCM record: 8kHz and 16kHz sample rate
    • Dual-mic noise suppression and acoustic echo cancellation
  • Display
    • Hardware 2D accelerator
    • DBI serial interface up to 320×320 @ 30 fps
    • 1-lane MIPI DSI interface up to 480×320 @ 30 fps
  • Camera – Mediatek camera serial interface up to VGA resolution @ 30 fps with YUV422 or RGB565
  • Other Peripherals
    • USB 2.0
    • 3x UARTs, 3x I2Cs
    • 6x PWMs, 4x SPI masters, SPI slave
    • I2S
    • SDIO v2.0
    • 5-channel ADC
    • Up to 38 GPIOs
  • Package – 172-ball TFBGA with 0.4mm pitch
  • Dimensions – 6.2 x 5.8 x 1.05 mm
  • Ambient temperature – -40°C to 85°C

There are interfaces for small displays and low resolution cameras, as well as a fair amount of I/Os, so it could certainly be use for audio applications outside of simple headphones, not matter how “smart” they may be.

One interesting part is that I did not get the news from MediaTek, but instead MediaTek Labs, Mediatek’s Internet of Things (IoT) developer program, and MT2533 is supported by the MediaTek LinkIt Development Platform for RTOS based on FreeRTOS. That means the SiP will be available to makers, and not only large companies, and development and debugging can be done in ARM Keil μVision, IAR Embedded Workbench and GCC like other LinkIt platforms. A development board or, like Mediatek calls it, an HDK (Hardware Development Kit), based on MT2533D could also be launched in the near future.

However Mediatek Labs only mentioned that MT2533D will be available to device makers in Q1 2017, and the developer documentation and tools will be released in Q3 2017, so we will have to wait for a while before being able to play with the platform. More details can be found on MT2533D product page.

Share this:

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK Pi 4C Plus
Subscribe
Notify of
guest
The comment form collects your name, email and content to allow us keep track of the comments placed on the website. Please read and accept our website Terms and Privacy Policy to post a comment.
3 Comments
oldest
newest
Paul M
Paul M
7 years ago

Interesting that they should support AAC over bluetooth, I wonder whether they could licence the AptX or AptX-HD codec from Qualcomm.

JM
JM
7 years ago

AptX has no advantage over AAC

Hamadi
Hamadi
7 years ago

How. Can i get a freesample ??

Khadas VIM4 SBC