Meet Zynqberry, a Xilinx Zynq FPGA Board with Raspberry Pi 2/3 Form Factor

Earlier this year, I wrote about Trenz Electronic’s Xilinx Zynq Ultrascale+ system-on-module, but I’ve just found out I missed another interesting product from the company. The ZynqBerry is a board powered by Zilinx Zync Z-7007S or Z-7010 ARM + FPGA SoC with Raspberry Pi 2/3 form factor.

Click to Enlarge

ZynqBerry specifications:

  • SoC
    • Xilinx Zynq XC7Z007S-1CLG225C (Z-7007S) single core ARM Cortex-A9 MPCore up to 766MHz + FPGA with 23K logic cells
    • Xilinx Zynq XC7Z010-1CLG225C (Z-7010) dual core ARM Cortex-A9 MPCore up to 866 MHz + FPGA with 28K logic cells
  • System Memory – 128 or 512 MB DDR3L
  • Storage – 16 MB Flash SPI flash + micro SD card slot
  • Video Output – HDMI, MIPI DSI interface
  • Audio Output – HDMI, 3.5mm audio jack (PWM audio only)
  • Connectivity – 100 MBit Ethernet via (LAN9514 USB Hub with Ethernet
  • USB – 4x USB 2.0 host ports
  • Camera – MIPI CSI-2 interface
  • Expansion – 40-pin Raspberry Pi compatible header
  • Debugging – USB UART and JTAG ARM & FPGA debug via micro USB
  • Power Supply – 5V via micro USB port
  • Dimensions – Raspberry Pi form factor
TE0726-03

Three different hardware versions of the board are available:

  • TE0726-03R – Minimal version with Xilinx Z-7010, 128 MB RAM, no Ethernet, no USB, no HDMI, no MIPI connectors – 79 Euros
  • TE0726-03M – Xilinx Z-7010 with 512 MB RAM – 109 Euros
  • TE0726-03-07S-1C – New model equipped with Xilinx Z-7007S + 512 MB RAM – 99 Euros

The ARM core(s) on the board run PetaLinux, and FPGA part can be programmed using Vivado Design Suite. You’ll find software and hardware documentation, and demos (HDMI, SDR, ALSA, CSI) in the Wiki. Some knowledge of German may be useful in the download area.

ZynqBerry boards can be purchased directly on Trenz Electronic website.

Share this:

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK Pi 4C Plus
Subscribe
Notify of
guest
The comment form collects your name, email and content to allow us keep track of the comments placed on the website. Please read and accept our website Terms and Privacy Policy to post a comment.
19 Comments
oldest
newest
rebeL
rebeL
6 years ago

Another one… give me please at least one with Mic-Input.

theguyuk
theguyuk
6 years ago

It is a FPGA can you not programme your own mic input.

James Youngs
James Youngs
6 years ago

If someone would port some of the old school computer cores (Amiga/ST/ZX Spec/C64) to this it would sell by the shedload….

Björn
6 years ago

Very expensive. For that you get almost 3 RPi.

TLS
TLS
6 years ago

Also, why not use the integrated Gigabit Ethernet in the SoC? Seems like an choice to go with only 100Mbps on something this expensive.

Martin Revert
Martin Revert
6 years ago

@rebeL
Heard this a lot, seems that very few people knows about the existence of USB mics

theguyuk
theguyuk
6 years ago

@James Youngs
You can emulate them in software on a £25 Android TV box. Goggle Play store full of emulators and many free.

John Ellis
John Ellis
6 years ago

Why would they use USB-Ethernet? Zynq has two RGMII ports.

James Youngs
James Youngs
6 years ago

@theguyuk Emulation NOT same as Simulation (FPGA)… I know you can emulate on Android box or Pi or PC or even PS3 etc

theguyuk
theguyuk
6 years ago

@James Youngs
We can play words of symatics but if don’t know how it is done you mostly cannot tell.

A Arduino replaces many components buy running software commands instead of physical connection and can be reprogrammed by updating or replacing the original programme. No different than a Soc running the firmware in a product.

agumonkey
6 years ago

Don’t forget parallela boards, with Zynq dual core and at least 512MB for 99$ + a dedicated 16core array processor. It had some community and the designers are very knowledgeable.

rebeL
rebeL
6 years ago


Thanks for answer, I´m looking for a board which has one (stereo) native Mic-Port not a “simulate”, because of seriously working with it. I´m a hearing aid master, looking for open system, Linux would be nice!

jerry
jerry
6 years ago

@James Youngs
Have you seen ZX-Uno? It features all those cores and much more… http://zxuno.speccy.org/index_e.shtml

James Youngs
James Youngs
6 years ago

@jerry

I saw it a while back and must have put out of my mind. Its great for 8 bit but I’d also want to do 16-bit like ST/Amiga/Megadrive…. The ST and Amiga were the first 2 I asked if this board might be suitable for….

rebeL
rebeL
6 years ago


The Suptronics X200 is sold out erverywere I was looking for, sadly I don´t have a credit card, aliexpress I can´t use.

Khadas VIM4 SBC