Zidoo H6 PRO Android TV Box is Powered by Allwinner H6 Processor

Earlier this year, Allwinner H6 was introduced as a 4K set-top box SoC with a quad core Cortex A53 processor, a Mali-T720MP GPU, support for “6K” video decoding, and several high speeds interfaces like USB 3.0 and PCIe. Zidoo just unveiled H6 PRO TV box based on the processor.

Zidoo H6 PRO TV box specifications:

  • SoC – AllWinner H6 quad-core ARM Cortex-A53 processor up to 1.8GHz with Mali-T720MP2 GPU
  • System Memory – 2GB DDR4
  • Storage – 16GB eMMC flash, micro SD card reader up to 32 GB
  • Video Output – 1x HDMI 2.0a up to 4K @ 60hz with HDR support, AV port (composite)
  • Video Playback Support
    • H.265/HEVC Main/Main10 profile @ level 5.2 high-tier up to 4K @ 60fps / 6K @ 30 fps
    • VP9 Profile 0/2, up to 4K @ 30fps
    • H264/AVC BP/MP/HP @ level5.1, MVC, up to 4Kx2K @ 30fps
    • MKV, MP4, Blu-ray ISO, 3D MVC…
    • SmartColor 3.0 image optimization engine
  • Audio I/F – HDMI, AV port (stereo audio), optical S/PDIF; DTS and Dolby supported
  • Connectivity – Gigabit Ethernet, 802.11ac WiFi, Bluetooth 4.1
  • USB – 2x USB 2.0 ports including on OTG port, 1x USB3.0 port on other side. An external power needed if USB connects to over 1TB mobile HDD.
  • Misc – IR receiver, reset/recovery button behind AV port, front panel display (TBC)
  • Power Supply – 5V/2A
  • Dimensions – 105.6mm x 105.6 mm x 17.5 mm

The box will run Android 7.0, and ship with a Bluetooth remote control, HDMI cable, a power adapter, and a user manual. I hope they will consider upgrading the design to support USB drives without external storage, and beef up the power supply too. This would avoid potential troubles for people who want to use USB drives. Zidoo has also revamped their ZIUI user interface / launcher for this model by making it simpler and more colorful.

I can’t find any other Allwinner H6 TV boxes on Alibaba, so it’s probably safe to assume Zidoo H6 Pro and other H6 devices are still a few months away. You may find a few more details on the product page.

Share this:

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK Pi 4C Plus
Subscribe
Notify of
guest
The comment form collects your name, email and content to allow us keep track of the comments placed on the website. Please read and accept our website Terms and Privacy Policy to post a comment.
23 Comments
oldest
newest
kc
kc
6 years ago

1.8ghz in a small box without any fans? really?

jernej
jernej
6 years ago

Here seems to be (beta?) kernel source https://github.com/tinalinux/linux-3.10/tree/r18-v0.9/ Although I don’t know if H6 wafer code is sun50iw3p1 or sun50iw6p1. All nice things are already supported (HDMI 2.0, USB 3.0, PCIE, etc.) and as a bonus, I couldn’t find blobs.

kc
kc
6 years ago

@jernej
well, looking at dts files both hav 1.2ghz max at cpufreq tables (with 1.0ghz set as default).

TL Lim
TL Lim
6 years ago

@jernej
R18 is A64

tkaiser
tkaiser
6 years ago

@kc
Look at cpufreq_tbl, H6 (sun50iw6p1) is 480-1800 MHz, sun50iw3p1 is 480-1200 MHz (PCIe/XHCI also missing).

tkaiser
tkaiser
6 years ago

@TL Lim
Doesn’t matter, we spotted new Allwinner SoCs like R40/V40/T3 also first time in older A64 BSP code drops 😉

Willy
Willy
6 years ago

Well balanced set of features. Let’s wait for the price and see how long it takes to get Linux working on it 🙂

tkaiser
tkaiser
6 years ago

@jernej By looking through both sun50iw3p1.dtsi and sun50iw6p1.dtsi it seems obvious to me that H6 seems to be the latter (since defined 1.8GHz as max cpufreq — that’s the value end users will see in CPU-Z and Android benchmarks — and USB3 and PCIe defined). It seems sun50iw3p1 is a stripped down version for mobile use (no USB3/PCIe, more limited thermal budget and charger0 –> status = “ok” instead of status = “disabled” with H6). By looking through ths, thermal, cooler and dvfs nodes for CPU and GPU cores it’s obvious that heat dissipation is still a challenge even with… Read more »

tkaiser
tkaiser
6 years ago

@Willy Well, wrt H6 and Linux support what @jernej spotted (no blobs) sounds promising but since we’re told Allwinner is preparing a new BSP variant relying on a 4.4 kernel (to be used with Android 7.0) I would better wait until this BSP drop is in the wild. AFAIK with Allwinner’s H5 BSP voltage regulation / DVFS is still broken so H5 devices that implement DVFS to increase CPU clockspeeds can not do this in Android or Linux with BSP kernel (limited to 1008 MHz since crashing above) while with mainline kernel this works. So we can only hope that… Read more »

TC
TC
6 years ago

So it does Hi10P anime in HW, like some Rockchip?

Mr Maso
Mr Maso
6 years ago

Allwinner….thank you but NO ! Cheating backyard company that still uses 40nm i guess and the mali 7XX GPU now that we are past 8XX. As for Zidoo, they try to make good products but strangly pick strange stuff to do so. I had a X1 from them once (also Allwinner SOC)…a nightmare….kept it only cause i got it for free.

Xalius
Xalius
6 years ago

Power Supply – 5V/2A

Into the trash it goes…

TL Lim
TL Lim
6 years ago

@Mr Maso
28nm

TC
TC
6 years ago

cnxsoft :
@TC
Based on the processor’s specifications: No.

Still Zidoo lists H.264/AVC Base/Main/High/High10 profile @ level 4.2; up to 4Kx2K @ 60fps

Jay
6 years ago

@Mr Maso
Agree. Both Allwinner, as well as Ziddo are cheats. Am the unfortunate owner of a Zidoo X6 Pro which was released with Lollipop and till date the firmware remains stagnated on Lollipop, with Zidoo remaining silent on sustenance.

I have no trust in both these companies.

PhilS
PhilS
6 years ago

I can’t see much in this to tempt people to buy other than the T-720 GPU and after the last great Allwinner debacle and their closed source kind of policy I think that this SOC should be avoided until it shows itself to be something different and with reliable and stable firmware.

xiaobin
xiaobin
6 years ago

Work like a charm!

TC
TC
6 years ago

cnxsoft :
I’ve asked Zidoo to confirm which one is right.

Thanks!

tkaiser
tkaiser
6 years ago
Khadas VIM4 SBC