Hardkernel to Launch Stackable $49 ODROID-HC1 Home Cloud & $200 ODROID-MC1 Cluster Solutions

Hardkernel ODROID-XU4 board is a powerful – yet inexpensive – ARM board based on Exynos 5422 octa-core processor that comes with 2GB RAM, Gigabit Ethernet, and a USB 3.0 interface which makes it suitable for networked storage applications. But the company found out that many of their users had troubles because of bad USB cables, and/or poorly designed & badly supported USB to SATA bridge chipsets. So they started to work on a new board called ODROID-HC1 (HC = Home Cloud) based on ODROID-XU4 design to provide a solution that’s both easier to ease and cheaper, and also includes a metal case and space for 2.5″ drives.

Click to Enlarge

They basically remove all unneeded features from ODROID-XU4 such as HDMI, eMMC connector, USB 3.0 hub, power button, slide switch, etc… The specifications for ODROID-HC1 kit with ODROID-XU4S board should look like:

  • SoC – Samsung Exynos 5422 quad core ARM Cortex-A15 @ 2.0GHz quad core ARM Cortex-A7 @ 1.4GHz with Mali-T628 MP6 GPU supporting OpenGL ES 3.0 / 2.0 / 1.1 and OpenCL 1.1 Full profile
  • System Memory – 2GB LPDDR3 RAM PoP
  • Storage – Micro SD slot up to 64GB + SATA interface via JMicron JMS578 USB 3.0 to SATA bridge chipset
  • Network Connectivity – 10/100/1000Mbps Ethernet (via USB 3.0)
  • USB – 1x USB 2.0 port
  • Debugging – Serial console header
  • Power Supply
    • 5V via power barrel
    • 12V unpopulated header for future 3.5″ designs [Update: ODROID-HC2 is in the works, to be released in November 2017]
    • “Backup” header for battery for RTC
  • Dimensions & weight – TBD

Exynos 5422 SoC comes with two USB 3.0 interfaces and one USB 2.0 interface, and since USB 3.0 interfaces are used for Ethernet and SATA, that’s why they only exposed a USB 2.0 port externally. The metal frame supports 2.5″ SATA HDD or HDD up to 15 mm thick, and it also used as a heatsink for the processor. The company tested various storage devices including  Seagate Barracuda 2 TB/5 TB HDDs, Samsung 500 GB HDD and 256 GB SSD, Western Digital 500 GB and 1 TB HDD, HGST 1TB HDD with UAS and S.M.A.R.T. function.

The fun part is that you can easily stack several ODROID-HC1 kits on top of each other, and you could use Ceph filesystem (Ceph FS), if you want the stacked boards to show as one logical volume [Update: This may not work well due to lack of RAM and 32-bit processor, see comments’ section]. The price is not too bad either, as ODROID-HC1 is slated to launch on August 21st for $49 + shipping with the board and metal frame.

But the company did not stop there, as they found out it was rather time-consuming to setup a 200 ODROID-XU4 cluster in order to test Linux kernel 4.9 stability, and also designed a ODROID-MC1 (MC = My Cluster) cluster with 4 boards, a metal frame and a large USB powered heatsink.

Click to Enlarge

The solution is based on the same ODROID-XU4S boards, minus the SATA parts. It’s also stackable, so building that 200 board cluster should be much easier and faster to do. The solution is expected to start selling for $200 around the middle of September, and on the software side some forum members are working on Docker-Swarm. Hardkernel is also interested in sending samples to people who have cluster computing experience.

Thanks to Nobe for the tip.

Share this:

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK Pi 4C Plus
Subscribe
Notify of
guest
The comment form collects your name, email and content to allow us keep track of the comments placed on the website. Please read and accept our website Terms and Privacy Policy to post a comment.
59 Comments
oldest
newest
lordzahl
lordzahl
6 years ago

Looks very nice! Nearly what i want. But a little more connections would be nice, e.g. a version with 2x SATA or a second USB port. But this is of course a chipset limitation.

Dsl
Dsl
6 years ago

They have something called the mycloud 2 which has 2 sata controllers and can allow for raid. Altought its more expensive than the HC1.

agumonkey
6 years ago

Win product right there.

Dsl
Dsl
6 years ago

Great ideas, glad they listened to the community and brought 2 awesome from those ideas. I really like thr metal case and heatsink. The HC1 is something I’ll definatly try out now that it can run 4.9.

Xalius
Xalius
6 years ago

From a hardware engineering perspecitve it does not make any sense to expose an additional USB2.0 port if you have two USB3 host controllers. You use one for storage with UAS, which I can see to not tolerate a Hub because of the increased amount of endpoints and overhead. But, why would you not pair the other USB3 host with a hub for GbE Ethernet and external USB port?

tkaiser
tkaiser
6 years ago

Very well done! I’ll prepare another OMV image disabling the rather inefficient Cloudshell 2 scripts based on detection of the internal USB hub soon. If Hardkernel wants me to test OMV on this board they could contact me through OMV forum.

: Board design and the availability of the unpopulated 12V header let me believe they also thought about the 3.5″ use case (just as suggested few weeks ago but with RK3328 instead of Exynos in mind — see bottom of this post).

JotaMG
JotaMG
6 years ago

tkaiser :
If Hardkernel wants me to test OMV on this board they could contact me through OMV forum.

Huh !
How much arrogant can you get, tkaiser??

Xalius
Xalius
6 years ago

JotaMG :

tkaiser :
If Hardkernel wants me to test OMV on this board they could contact me through OMV forum.

Huh !
How much arrogant can you get, tkaiser??

On what level do you think this is an arrogant request? Hardware manufacturers are used to put out their investment of merely a couple thousand of US$ for hardware development all the time, expecting to get long term software support for free, from open source projects that equal software engineering worth a couple 10k $ a month…

ODROID
ODROID
6 years ago

@tkaiser
Please check your PM box in odroid-forum. We already sent you a PM before cnx posted this news.

JotaMG
JotaMG
6 years ago

Xalius:
sorry, but did not get your point?

blu
blu
6 years ago

I wonder if that T628 MP6 could be used solely as an OpenCL device.

crashoverride
crashoverride
6 years ago

@blu
Yes, OpenCL is officially supported on it.

nobe
nobe
6 years ago

@blu
as far as i understand, it can.

willy
willy
6 years ago

Xalius :
From a hardware engineering perspecitve it does not make any sense to expose an additional USB2.0 port if you have two USB3 host controllers.

I think both GigE and SATA are on USB3 so there’s little room for more bandwidth there. If the chip has native USB2, it can be quite useful for external backups compared to a possibly already overloaded USB3.

willy
willy
6 years ago

They thought about my build farm use case 😉 Actually it could be an inexpensive option for this. At $200 for 4 boards, it’s cheaper than RK3288 at ~$60 a piece for about the same performance level, and here the CPU should be properly cooled down.

crashoverride
crashoverride
6 years ago

@willy
There are two (2) USB3 ports provided by the SoC. One goes to GB Ethernet, and the other goes to SATA. They are not shared and there is no hub.

willy
willy
6 years ago

@crashoverride
Ah that’s pretty cool. This further explains the lack of any extra USB3 port then!

Mark
Mark
6 years ago

So into each unit for 50usd one can plug two hdd’s? since it has two usb3 interfaces? Is there place for two hdd’s in the metal case? Or should i buy two units for a two disk setup?

David Marceau
6 years ago

Why aren’t they using a 64-bit cpu? the Samsung Exynos5422 Cortex™-A15 2Ghz and Cortex™-A7 Octa core CPUs are documented as being 32-bit processor core licensed by ARM Holdings implementing the ARMv7-A architecture.

64-bit cpus have ARMv8 which is a better chip for this kind of stuff, isn’t it?
The other point I’m also unimpressed with is the RAM? just 2GB. real motherboards like Supermicro AMD-EPYC or Intel based all have 512GB+ RAM capacity we can throw onto the board. 2GB is SO LITTLE!!!

nobe
nobe
6 years ago

@willy
is cpu cache relevant in your use case ?
i noticed exynos-5422 has 2MB for A15 cluster while rk3288 has 1MB.
then there’s also a bit more max frequency + the additional ‘little’ cluster in 5422, so i wonder if it might perform significantaly better at compiling software
by the way, i advertised your work in odroid forums, you might be contacted by hardkernel in the next few weeks (no guarantee though :p)

willy
willy
6 years ago

@nobe Yep, CPU cache is very important, just like memory bandwidth. In fact the build performance scales almost linearly with memory bandwidth. With twice the cache we could expect a noticeable boost. I’ve read on their forums that XU4 uses 750 MHz DDR3 frequency vs 933 on XU3 and 800 on MiQi. In all cases that’s dual-channel 32-bit so it’s more or less equivalent. The cortex A15 is supposed to be slightly faster on certain workloads, with peaks around 3.5 DMIPS/MHz vs about 3.0. Also I’ve always suspected that the RK3288 with its A12 renamed to A17 doesn’t benefit from… Read more »

willy
willy
6 years ago

David Marceau : Why aren’t they using a 64-bit cpu? Because that’s not needed for this type of workload and with this amount of memory. 64-bit cpus have ARMv8 which is a better chip for this kind of stuff, isn’t it? Not necessarily. The only other CPU you’ll find in this price range is the A53, which is very rarely available above 1.5 GHz and which clock-for-clock is just half of the performance of the A15. The A15 is of the same generation as the A57, ie a very powerful one but power-hungry. The other point I’m also unimpressed with… Read more »

CampGareth
CampGareth
6 years ago

Ceph requires a 64-bit CPU, so no Ceph on here though you could run a CephFS *client* which would be functionally identical to say an NFS client, just backed by a Ceph cluster running on other 64-bit machines.

Now a stackable machine that is cheap and works with Ceph? That’s the Espressobin in a nutshell.

nobe
nobe
6 years ago

@CampGareth
as far as i understand, 64-bit is required in X86 world, not in ARM world
so i think ceph can work with armv7
http://docs.ceph.com/docs/master/start/hardware-recommendations/

tkaiser
tkaiser
6 years ago

@ODROID [x] done. Thanks for the offer, I’m happy to test with the new board variants and report back. In the meantime I remembered that most probably no new OMV image will be needed since I implemented Cloudshell 2 detection already so the CS2 services won’t be installed on HC1 anyway. BTW: If heat dissipation is sufficient and HC1 will be available via german resellers within the next 3 weeks you already sold ~20 boards. 🙂 @willy Very interested in your findings whether/how putting cpu0-cpu3 offline affects performance of your use case. I made some performance tests some time ago… Read more »

Tracy Reed
6 years ago

I am a big fan of ceph and have been thinking along these same lines. Glad to see the new hardware out. But Ceph requires a gig of RAM per terabyte of storage. After OS overhead etc. You can only put 1T disks in these. Has anyone even had ceph running on arm or odroid yet?

tkaiser
tkaiser
6 years ago

@nobe
Unfortunately Ceph hardware requirements do not mention that using Ceph (or any other cluster FS) without ECC DRAM is not the greatest idea. And on most ARM devices with Ceph we run in a nice mismatch between available DRAM and supported storage sizes anyway.

CampGareth
CampGareth
6 years ago

@nobe If it’s possible they’re certainly not supplying packages. Have a look at the package repository under /debian-kraken/dists/xenial/main/binary-armhf/ and what you’ll find is a list of included packages 1.2KB long (CephFS client and ceph-deploy). If you look at the arm64 section you’ll find a 56KB long list of packages (the entire suite). Practical upshot of this is you won’t have to compile your own if you’re on 64bit ARM. Oh and tkaiser’s right in that ECC is recommended, as is a lot of RAM and compute power. Realistically you can tweak around the RAM requirements and get usage as low… Read more »

theguyuk
theguyuk
6 years ago

Ceph can run on inexpensive commodity hardware. Small production clusters and development clusters can run successfully with modest hardware. Process Criteria Minimum Recommended ceph-osd Processor 1x 64-bit AMD-64 1x 32-bit ARM dual-core or better RAM ~1GB for 1TB of storage per daemon Volume Storage 1x storage drive per daemon Journal 1x SSD partition per daemon (optional) Network 2x 1GB Ethernet NICs ceph-mon Processor 1x 64-bit AMD-64 1x 32-bit ARM dual-core or better RAM 1 GB per daemon Disk Space 10 GB per daemon Network 2x 1GB Ethernet NICs ceph-mds Processor 1x 64-bit AMD-64 quad-core 1x 32-bit ARM quad-core RAM 1… Read more »

Mike Schinkel
6 years ago

This looks almost exactly what I have been looking for.

Question though, are the cases all open, or do the pictures just not show a complete case?

willy
willy
6 years ago

@tkaiser Regarding the use of CPU cores, if at least I can have all the performance I need out of the big cluster, I may leave the other ones running for “low-performance” tasks which do not heavily compete with gcc, such as ssh, network interrupts, or maybe even distccd if I patch it to perform sched_setaffinity() before executing gcc. That may allow it to decompress the incoming traffic on the little cores and distribute requests to the heavy ones. The benefit here is not much to gain a bit more CPU, rather to lower the accept latency by not having… Read more »

tkaiser
tkaiser
6 years ago

CampGareth : ECC… hmm, it’s classically required because normally you have a single big box that can Never Fail Ever(tm) but clustered storage should mean you don’t need it. If a node starts having small amounts of memory errors then the data on disk will be slightly off but checksums and 2 other good copies will let you detect and correct that automatically. Only in a theoretical world where your Ceph cluster never gets feed with new data. 🙂 If data corruption happens when data is entering the cluster you checksum already corrupt data, then distribute it accross several cluster… Read more »

tkaiser
tkaiser
6 years ago

@Mike Schinkel
According to ‘ODROID’ they’re preparing a transparent plastic cover (where my last little remaining concern — position of the SD card slot — is addressed and also explained: ‘If user assembles the cover, the exposed length of the SD card is only 2~3mm.’).

A little bit delayed to a molding tool problem but the best place to ask/look is forum.odroid.com of course 🙂

willy
willy
6 years ago

tkaiser : BTW: You might want to compare tinymembench results on your MiQi with XU4 numbers: discuss.96boards.org/t/odroid-xu4-cortex-a15-vs-hikey-960-a73-speed/2140/22 Good idea! From what I can see, the MiQi is *much* faster at 1.8 GHz than the XU4 reported there. For example C filled shuffle goes from 1.9 GB/s to 6.2 GB/s. The standard memcpy/memset are only 5% faster. Neon is between 50 and 100% faster (ie 6GB/s when XU4 reports 3.3-4.4). The RAM latencies show that the XU4’s caches are about 30% faster but that the MiQi’s memory controller is roughly 80% faster : block size : single random read / dual… Read more »

MickMake
6 years ago

@Mike Schinkel
Mike,
I think this pretty much covers everything in your use case. The physical case is a minor technicality that can be resolved easily – 3D print over the alu extrusion.

nobe
nobe
6 years ago

that’s interesting.
also, keep in mind that this exynos-5422 uses PoP DRAM.
so, if i understand correctly, the DRAM chip is placed just on top of the SoC.
i’ve wondered for a long time how much the SoC temperature can interfere with DRAM performance.
i suspect it shouldn’t matter when solely using tinymembench, but this might matter when compiling a kernel for example.

tkaiser
tkaiser
6 years ago

willy : I really think a test is required Absolutely. Given that you dropped the idea to ignore the little cores you guys (ant-computing.com) are the perfect match to explore cluster capabilities with MC1 (or HC1 if the latter isn’t yet available). Having another 4 slow cores available on the same SoC makes up for some minor challenges as well as some great opportunities IMO with your use case. And wrt @nobe‘s DRAM performance concerns testing through this quickly would also be easy with MC1/HC1 (just check tinymembench results with an external fan to cool everything down and then again… Read more »

CampGareth
CampGareth
6 years ago

@Jean-Luc Aufranc (CNXSoft) GlusterFS has packages available for a load of debian versions and would do something similar. It’s a bit more simplistic, from what I can gather a gluster client just treats all the servers as if they were individual NFS shares but presents them as one to the user. The user then configures striping across shares on the client side. @tkaiser I forgot about incoming data, you’re right that’ll hit one node then get copied across the others. Still it must be possible to get around the ECC requirement, it just isn’t common in the ARM world and… Read more »

tkaiser
tkaiser
6 years ago

tkaiser :
I’ll run tinymembench later on my XU4 to check results and if they differ from the above link I’ll drop you a note here

https://pastebin.com/sXn4fx6A (I can confirm by looking at monitoring clockspeeds that CPU affinity worked, also no throttling occured when running on the big cores but results are somewhat surprising)

tkaiser
tkaiser
6 years ago

CampGareth : Still it must be possible to get around the ECC requirement Huh? You realized that even JEDEC talks these days about optional on-die ECC for LPDDR4 since density increased that much that we risk today way more bit flips than in the past. It’s also not that a memory module becomes ‘bad’ over time. It’s just… bit flips happen from time to time for whatever reasons. When you have no ECC you either won’t take notice (silent data corruption) or if the bit flips affect pointers and stuff like that you see an app or the whole OS… Read more »

willy
willy
6 years ago

tkaiser :

tkaiser :
I’ll run tinymembench later on my XU4 to check results and if they differ from the above link I’ll drop you a note here

https://pastebin.com/sXn4fx6A

Wow, the results are indeed surprizing and not quite good. And the lower cores definitely are not impressive either.
Here’s the one on the MiQi at 1.8 GHz (no throttling either) : https://pastebin.com/0WMHQN09

tkaiser
tkaiser
6 years ago

@MickMake
Well, based on Mike’s questions over the past few months I would assume he needs high random IO values with a connected mSATA SSD. So since recently combining the so called ‘Orange Pi Zero NAS Expansion Board’ with ‘Orange Pi Zero Plus’ (Allwinner H5, Gigabit Ethernet, connecting to the NAS Expansion board via USB2 on pin headers) might be an inexpensive option.

tkaiser
tkaiser
6 years ago

@willy Yes, I did not trust in either so decided to re-test. Since I was testing with my own OMV/Armbian build I added the below stuff to /boot/boot.ini, tested, adjusted DRAM clockspeed to 933 MHz as per Hardkernel’s wiki, tested again (better scores) and then tried out also their stock official Ubuntu Xenial image (also using 4.9.x). Results: https://pastebin.com/iBCq6p9U setenv ddr_freq 825 dmc ${ddr_freq} 12 setenv ddr_freq 825dmc ${ddr_freq} I did not test with their old Exynos Android kernel (3.10 or 3.14, don’t remember exactly) but obviously this is something for someone else to test through since the numbers in… Read more »

CampGareth
CampGareth
6 years ago

@tkaiser
It’s a granularity of cost thing. I can’t justify spending £1000 on a new server (and even old servers are expensive if you want to fill them with RAM at £15 per 8GB) but I can justify spending £30 33 times. As an added bonus if that one £1000 server blows up it’d take months to replace, but with the SBCs I might not even care.

Willy
Willy
6 years ago

tkaiser :
@willy
Yes, I did not trust in either so decided to re-test.(…)

It’s possible that you will hardly go higher. Keep in mind that one of the nicest improvements from A15 to A17 was the redesign of the memory controller and the cache. It’s possible that a lot of bandwidth is simply lost on A15 and older designs. I remember noticing very low bandwidth as well on several A9 for example.

goblin
goblin
6 years ago

Does it have full uboot and mainline kernel support like rpi and sunxi?

Armer
Armer
6 years ago
tkaiser
tkaiser
6 years ago

@goblin
The vendor maintains an own 4.9 LTS branch (most people keen on NAS performance use since ‘USB Attached SCSI’ works here) but developers also run most recent mainline kernel on Exynos 5244 / XU4/HC1 since quite some time now.

tkaiser
tkaiser
6 years ago

@CampGareth Well, kinda off-topic here but since Jean-Luc brought up the cluster idea (all HC1 appearing as single storage)… I’ve never seen any reliable storage cluster attempt for a few TB that didn’t suck compared to traditional NAS/SAN concepts. These setups get interesting in larger environments but for a TB I doubt it. I also don’t understand why you’re talking about costs per server without adding storage to it (HDDs)? In the UK as well as in DE 4-bay storage servers with ECC DRAM and sufficient performance are below the 200 bucks barrier without disks, eg. a standard HP Microserver… Read more »

TheOldMonk
TheOldMonk
6 years ago

would be totally interesting to see this getting evolved in edge computing ecosystems :]

tkaiser
tkaiser
6 years ago

Today one HC1 together with some accessories arrived that Hardkernel sent out on Monday. First impression: Looks nice (not that important), heat dissipation works *very* well especially compared to XU4 fansink and to my surprise position of the heatsink fins doesn’t matter that much. I made a few performance tests but as usual discovered a mistake I made so just another hour wasted and I’ve to redo the tests again. Quick check whether UAS/SSD performance improved when no internal USB3 hub is in between Exynos SoC and USB-to-SATA bridge: https://pastebin.com/Ma7ejyYb (preliminary numbers since I have to retest with XU4 and… Read more »

Benny
Benny
6 years ago

@tkaiser There are advantages to the HC1 that your overlooking compared to the 4 bay nas. Looking at this from a more commercial point of view, what the focus group is for the HC1/MC1: * Encryption … client per client encryption where each client there files are separate encrypted based upon unique keys for that client. While you can do this encryption on the “production nodes” before sending it to the store nodes, it simply is more logical to have encryption done on the storage nodes. Its separates the logic a bit more clean manner. Work nodes (MC1) do real… Read more »

tkaiser
tkaiser
6 years ago

@Benny I’m still not convinced about Ceph or other storage cluster use cases here, especially when it’s just about a few nodes. And it will be close to impossible to convince me giving up on ECC (regardless at which level, since ECC is just adding a bit redundancy to be able to identify/correct problems) since I’ve access to a rather large monitoring system collecting DRAM bit flips that do happen from time to time. With ECC DRAM and server grade hardware you get notified and single bit flips also get corrected (see mcelog in Linux) without ECC it just happens.… Read more »

Mark
Mark
6 years ago

Hmm, why is there only a partial case? Is there a lid I am not seeing?

Yes, maybe not the best for Ceph, but if you are just needing something small for redundancy, I would think two of these with gluster would be fine.

tkaiser
tkaiser
6 years ago

Mark :
Hmm, why is there only a partial case? Is there a lid I am not seeing?

See comment #35 above.

tkaiser
tkaiser
6 years ago

tkaiser : If Hardkernel wants me to test OMV on this board… [x] Done. Mini review online: https://forum.armbian.com/index.php?/topic/4983-odroid-hc1/ When following some suggestions — eg. https://forum.odroid.com/viewtopic.php?f=96&t=27982 — I came to different conclusions staying with ondemand cpufreq governor but moved the IRQ handler for the Gigabit Ethernet chip from a little core to a big core to guarantee full GbE network utilization in all situations. Depending on use case (using the big cores for other demanding stuff) this is something that users might want to revert. But due to HC1 being a big.LITTLE design playing with IRQ/HMP affinity might be really worth… Read more »

tkaiser
tkaiser
6 years ago

Mike Schinkel :
This looks almost exactly what I have been looking for.

What about the NanoPi Duo available in the meantime? https://forum.armbian.com/index.php?/topic/5035-nanopi-duo-plus-mini-shield

Khadas VIM4 SBC