$70 UP AI Core mini PCIe Card Features Intel Movidius Myriad 2, Supports Tensorflow and Caffe Frameworks

AAEON’s Up Board has given us some affordable Intel development boards over the years with products such as the Cherry Trail based UP Board, or Apollo Lake powered UP Squared board among others, that are competitively priced against equivalent Arm development boards.

The company has now launched a new UP AI Edge family, which will include hardware based on Intel Altera FPGA or Intel Movidius VPU (Vision Processing Unit). Their first product is based on the latter, more exactly Movidius 2 2450 VPU, and instead of being a standalone board, UP AI Core is a mini PCIe card that can fit into any 64-bit Intel board or computer.

UP AI Core card specifications:

  • SoC – Intel Movidius Myriad 2 2450 VPU
  • System Memory – 512MB DDR SDRAM
  • Mini PCIe edge connector
  • Dimensions – 51 x 30 mm

Host computer/board requirements

  • System Memory – 1GB RAM or more
  • Storage – 4GB of free storage
  • Free mini PCIe slot
  • x86_64 computer running Ubuntu 16.04

The card supports TensorFlow and Caffe frameworks for now. It looks similar in function to Movidius Neural Compute stick, but instead of an USB 3.0 interface, a mini PCIe is used. Since the stick works with Raspberry Pi 3 board, it’s quite possible the AI Core also work on Arm boards with an mPCIe slot. While the company does not explicit mentions the interfaces used over the mPCIe connector, the card is compatible with UP Squared board, so data is likely going over PCIe instead of just USB.

The company explains the the board enables enables rapid prototyping, validation and field deployment of Deep Neural Network (DNN) inference applications at the edge without a connection to the cloud. Intel Movidius Neural Compute SDK allows developers to profile, tune, and deploy Convolutional Neural Network (CNN).

AAEON is taking pre-order for UP AI Core for $69.99 with shipping scheduled for the end of April.

Share this:

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK Pi 4C Plus
Subscribe
Notify of
guest
The comment form collects your name, email and content to allow us keep track of the comments placed on the website. Please read and accept our website Terms and Privacy Policy to post a comment.
12 Comments
oldest
newest
tkaiser
tkaiser
6 years ago

: ‘so data is likely going over PCIe instead of just USB’

If the pictures are correct it can only be PCIe since the relevant pins are routed to somewhere on the PCB while pins 36/38 (USB2) aren’t.

BTW: I hope you feature the new ‘UP Core Plus’ board soon too and show there especially the passive heatsink so other board vendors might learn how efficient passive cooling looks like (large distance between large heatsink fins): http://i0.wp.com/www.up-board.org/wp-content/uploads/2018/02/upc_stack.png

erick h
5 years ago

Since the net plus has a mPCI-e, can I use the Core Plus + Net Plus + AI Core together? If this is possible, this could become a good alternative to Jetson TX2.

TLS
TLS
6 years ago

@tkaiser
Yes, the pins are PCIe, but both of you missed the Fresco Logic USB 3.x host controller on the board.
In other words, the card itself is mini PCIe, but the Myriad 2 is still connected via USB through the host controller.
Odd implementation, but I guess it makes it easier to plug this board into a variety of hardware.

tkaiser
tkaiser
6 years ago


Ah, interesting. Indeed looks like a FL1100 used here. Just had a quick look at the specs and the various Atoms that are available on UP Core Plus seem to have 3 USB3 connections and 6 PCIe 2.x lanes. And only by using either ‘Net Plus’ or ‘AI Plus’ Expansion boards the mPCIe/mSATA connector (seems to be switchable) is available so most probably they ran out of USB3 ports and had to use a PCIe lane then?

TLS
TLS
6 years ago

@tkaiser Well, for one, only M.2 supports USB 3.x, whereas mini PCIe only supports USB 2.0, so this is one limitation based on the choice of connector on this board. Then by going down this route, there is obviously a much wider ecosystem that you can plug it into, especially when it comes to more industrial applications. A simple PCIe to mini PCIe adapter would allow you to use it with any old desktop as well. This would be harder to “borrow” than a USB dongle and also harder to break, as you can’t bump into this by accident. The… Read more »

TLS
TLS
6 years ago

Never mind, the DRAM is stacked on top, that makes more sense. The 2MB is just on-chip memory.

tkaiser
tkaiser
6 years ago


Thinking a little bit more about use cases the mPCIe/mSATA connector starts to make a lot of sense now even if for this use case a PCIe USB3 controller had to be ‘wasted’:

* the Myriad 2 most probably performs better with an USB3 SuperSpeed connection than USB2
* the mPCIe connector is limited to USB2, PCIe or mSATA (no USB3 here)
* AAEON most probably wants to provide their users with the most flexible miniature expansion port possible

Though M.2 key B could’ve been also used IIRC (PCIe x2, SATA, USB2 and USB3)?

TLS
TLS
6 years ago

@tkaiser
My comment saying almost exactly that was held for moderation…

M.2 key B is usually limited to SATA drives only, even though technically it’s meant to support additional interfaces.
I have not seen any implementations where USB 3.0 is actually connected to an M.2 key B slot.

tcmichals
tcmichals
6 years ago

One of the issues with the UP board is support for CSI camera. https://forum.up-community.org/discussion/comment/3168#Comment_3168 (maybe this is fixed now?)

erick h
5 years ago

Or an IP camera if you add the net plus module.

Khadas VIM4 SBC