Geniatech DS-3566 digital signage board is powered by a Rockchip RK3566 SoC

Geniatech DS-3566 is a board based on Rockchip RK3566 designed for digital signage applications with a low-profile, multiple video interfaces such as HDMI, LVDS, eDP, and MIPI DSI, and plenty of headers and connectors for expansion.

The single board computer ships with up to 8GB RAM, 128GB eMMC flash, and supports Gigabit Ethernet, WiFi 5, Bluetooth 4.1, as well as cellular connectivity as an option. Some of the interfaces available through connectors include RS232, RS485, CAN Bus, I2C, SPI, etc…

Geniatech DS-3566

Geniatech DS-3566 specifications:

  • SoC – Rockchip RK3566 quad-core Arm Cortex-A55 processor @ 1.8 GHz with Arm Mali-G52 EE GPU, 0.8 TOPS NPU
  • System Memory – 2GB to 8GB LPDDR4
  • Storage – 16GB to 128GB eMMC flash, MicroSD card slot
  • Video Interfaces
    • 1x HDMI 2.1 up to 4Kp60
    • 1x LVDS header and backlight header
    • 1x eDP header and backlight header
    • 1x 4-lane MIPI DSI connector
  • Camera – 1x 4-lane MIPI CSI connector
  • Audio
    • 3.5mm headphone jack
    • 2x microphone connector
    • 4-pin speaker header
  • Networking
    • Gigabit Ethernet with low-profile RJ45 connector
    • WT6354 wireless module with Wi-Fi 5 2×2 MIMO and Bluetooth 4.1 (based on AP6354)
    • Optional 2G/3G/4G/LTE cellular connectivity via mPCIe socket and nano SIM card slot
    • 3x u.FL antenna connectors for WiFi, Bluetooth, and Cellular
  • USB – 1x USB Type-A 3.0 port, 1x USB 2.0 OTG Type-A port, 4x 4-pin USB 2.0 internal headers
  • Serial (All 2.0mm pitch)
    • 3x 4-pin RS232 connectors
    • 1x 4-pin RS485 connector
    • 1x 4-pin CAN Bus connector
  • Expansion  (All 2.0mm pitch)
    • 2-pin GPIO connector
    • 6-pin SPI connector
    • 6-pin I2C connector
  • Debugging – 4-pin debug header
  • Misc – 4-pin IR connector, ADC key connector, RTC + battery holder, Reset and Recovery buttons, 3x user buttons
  • Power supply – 5 to 18V via DC jack or 4-pin connector (Note: specs read 5V/2A, but silkscreen 5~18V)
  • Dimensions – 124 x 85mm; Thickness: 14mm (estimated; based on Khadas VIM4 specs with a similar low-profile design)
  • Weight  70 grams
  • Temperature range – 0 to 60°C

RK3566 digital signage board

Geniatech provides Debian10 and Android 11 operating systems for the board and claims to provide resources and technical datasheets for custom development. Besides digital signage, the Rockchip RK3566 board can also be used for touch-enabled HMIs, conference room monitors, cash registers, self-service terminals, automotive infotainment solutions, and so on.

Geniatech did not provide pricing information for the DS-3566 SBC. More details may be found on the product page.

Share this:
FacebookTwitterHacker NewsSlashdotRedditLinkedInPinterestFlipboardMeWeLineEmailShare

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK Pi 4C Plus

One Reply to “Geniatech DS-3566 digital signage board is powered by a Rockchip RK3566 SoC”

Leave a Reply

Your email address will not be published. Required fields are marked *

Khadas VIM4 SBC
Khadas VIM4 SBC