microSD-express Pi Adapter is an ultra-small microSD Express adapter for the Raspberry Pi 5

We’ve just written about Will Whang’s RPI5-SDexpress-Hat board, which adds a microSD Express slot to the Raspberry Pi 5, but it’s not that small, and it’s using the 40-pin GPIO for power, so it’s not convenient if you want to install another Raspberry Pi HAT+.

Vassily Petrov’s “microSD-express Pi Adapter” is a much smaller microSD Express adapter on a flexible PCB that plugs directly into the PCIe FFC connector and nothing else, driving power from the PCIe connector only.

Tiny microSD Express adapter for Raspberry Pi 5

There’s not much on the PCB itself besides a microSD Express card slot and a Microchip MIC2230 800mA/800mA step-down DC/DC regulator.  We’re told speeds of up to 800 MB/s are achievable, limited by the PCIe Gen3 x1 interface on the Pi 5 itself. For reference, the RPI5-SDexpress-Hat was tested at about 600 MB/s for sequential reads and under 200MB/s for sequential writes using a 256GB Samsung microSD Express card.

microSD Express adapter schematics

A worry I initially had was whether there was enough power through PCIe at all times. In theory, a microSD Express card can consume up to 1.8 Watts on a PCIe Gen3 x1 interface, and the two 5V pins on the PCIe interface of the Pi 5 are rated at 500mA (for 1A total current), so it should be enough at 5V (5 Watts in total).

The microSD-express Pi Adapter is open-source hardware with KiCad schematics and PCB layout, PDF schematics, BoM, and Gerber files all released on GitHub, but without any clear license. If you plan to make one yourself, Vassily explains that “controlled impedance is critical for good PCIe performance. The files are designed for 50μm PI dielectric and 0.5oz copper”.

microSD-Express Pi Adapter PCB layout

There’s no indication that Vassily plans to sell the adapter, but I would not be surprised if it eventually shows up for a few dollars on AliExpress or eBay.

Thanks to Tom for the tip.

Share this:

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress. We also use affiliate links in articles to earn commissions if you make a purchase after clicking on those links.

Radxa Orion O6 Armv9 mini-ITX motherboard
Subscribe
Notify of
guest
The comment form collects your name, email and content to allow us keep track of the comments placed on the website. Please read and accept our website Terms and Privacy Policy to post a comment.
2 Comments
oldest
newest
Boardcon MINI1126B-P AI vision system-on-module wit Rockchip RV1126B-P SoC