GUITION JC4880P433 is a 4.3-inch capacitive touch display development board built around the GUITION JC-ESP32P4-M3 ESP32-P4 and ESP32-C6 module, which we have also seen used in the JC-ESP32P4-M3-DEV board.
The board also includes a MIPI CSI connector for camera input, a MIPI DSI connector for display output, two USB Type-C ports, expansion I/Os, a lithium battery interface, a microphone, and a speaker connector. Security features include secure boot, flash encryption, hardware encryption, random number generation, access protection, and permission separation, making it suitable for secure and connected HMI projects.
JC4880P433specifications:
- Core module – GUITION JC-ESP32P4-M3-C6
- Main SoC – Espressif Systems ESP32-P4
- CPU
- Dual-core 32-bit RISC-V HP (High-performance) CPU @ up to 400 MHz with AI instructions extension and single-precision FPU
- Single-RISC-V LP (Low-power) MCU core @ up to 40 MHz with 8KB of zero-wait TCM RAM
- Memory
- 768 KB HP L2MEM (for dual-core CPU), 32 KB LP SRAM, 8 KB TCM (for LP MCU core)
- 32MB PSRAM
- Storage – 128 KB HP ROM, 16 KB LP ROM
- GPU – 2D Pixel Processing Accelerator (PPA)
- VPU – H.264 and JPEG codecs support
- CPU
- Wireless SoC – ESP32-C6 WiFi 6, Bluetooth 5, and 802.15.4 (Zigbee/Thread) connectivity
- Storage – 16MB NOR flash
- Antenna – IPEX antenna connector on the module (there’s also a ceramic antenna on the dev board)
- Dimensions – 27 x 27 x 3.4mm
- Temperature – -20°C ~ +70°C
- Main SoC – Espressif Systems ESP32-P4
- Storage – MicroSD card slot
- Display – 4.3-inch 480×800 IPS capacitive touchscreen connected via MIPI-DSI
- Camera I/F – MIPI CSI connector for connecting an external camera module
- Audio
- Microphone connector
- Speaker connector
- USB – 2x USB 2.0 Type-C ports
- Serial – 4-pin UART connector for UART 0 and UART 1, 4-pin RS-485 connector
- Expansion
- 26-pin GPIO header with 2.54mm pitch with I2C, SPI, PWM, ADC, RMT, MCPWM, TWAI, LEDC
- I2C connector
- Debugging – UART port for debugging
- Security
- Hardware key management unit
- Digital signature engine
- Â Misc
- Power LED
- Jumpers for connecting power, reset, and user buttons
- Power Management
- 5V via USB-C port
- Lithium battery interface
- Multiple 3.3V / 5V power pins
- Dimensions – 114.4 x 66.8 mm
The development board works with the ESP-IDF framework, and for HMI applications, you can use GUI frameworks like SquareLine Studio and LVGL. However, the JC4880P433 is now supported/listed in GUITION Designer documentation, and neither is the similar GUITION JC1060P470C 7-inch display we previously covered. Unfortunately, that is the most information I was able to get from the AliExpress listing.
The JC4880P433 touch display development board is available on AliExpress for $31.96 including shipping, but before eventual taxes.
Debashis Das is a technical content writer and embedded engineer with over five years of experience in the industry. With expertise in Embedded C, PCB Design, and SEO optimization, he effectively blends difficult technical topics with clear communication
Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress. We also use affiliate links in articles to earn commissions if you make a purchase after clicking on those links.
