Raspberry Pi CM5 carrier board supports dual Ethernet (1GbE + 2.5GbE) and wide 7V–36V DC input

Waveshare’s CM5-DUAL-ETH-BASE is a carrier board for the Raspberry Pi CM5, featuring dual Ethernet (1GbE + 2.5GbE), two 4K HDMI outputs, two MIPI CSI/DSI interfaces, and more. It supports NVMe SSDs or AI accelerators via an M.2 slot, offers USB 3.2/2.0 ports, a 40-pin GPIO header, and a wide 7V–36V DC input, making it ideal for industrial networking and edge computing applications.

In the past, we have seen other carrier boards such as Seeed Studio’s CM5 MINIMA, Waveshare’s CM5-NANO-B, and CM5-PoE-BASE-A, among others. However, this is the only carrier board that features dual Ethernet with a 2.5GbE option and a wide input voltage range.

Waveshare CM5 DUAL ETH BASE

Waveshare CM5-DUAL-ETH-BASE specifications:

  • Compatibility – Compatible with all Raspberry Pi Compute Module 5 variants
  • Storage
    • M.2 M-Key slot (PCIe Gen2/3 x1) for NVMe SSDs or AI modules
    • MicroSD card slot (for CM5 Lite without eMMC)
  • Display and Camera
    • 2x HDMI ports supporting dual 4K display output
    • 2x 4-lane 22-pin MIPI DSI/CSI interfaces
  • Networking
    • Gigabit Ethernet RJ45 port
    • 2.5GbE RJ45 port (10/100/1000/2500 Mbps) via USB to 2500 Mbps Ethernet chip
  • Audio – Via HDMI port
  • USB
    • USB 3.2 Gen1 (5 Gbps) Type-A port
    • 2x USB 2.0 Type-A ports (via a USB hub chip)
    • USB Type-C port for eMMC firmware flashing
  • Expansion
    • 40-pin color-coded Raspberry Pi GPIO header
    • M.2 M-Key slot (PCIe Gen2/3 x1) for NVMe SSDs or AI modules
  • Misc
    • Boot and Power buttons
    • NVMe activity LED, Ethernet LEDs, system STAT LEDs
    • RTC with battery (CR1220)
    • 4-pin 5V PWM fan header
    • EEPROM and encryption chip
  • Power – 7V to 36V wide voltage range via DC jack
  • Dimensions – 109.0 x 91.5 mm
Raspberry Pi CM5 Base Board Interfaces
CM5-DUAL-ETH-BASE Raspberry Pi CM5 baseboard Interfaces
Raspberry Pi CM5 Base Board hardware overview
CM5-DUAL-ETH-BASE hardware overview

The company does not specifically mention anything about software support, but it should work with the official Raspberry Pi OS and other operating systems supported by the Raspberry Pi CM5. Similar to the CM5-NANO-B board, it has dual multiplexed MIPI CSI or DSI ports and supports cameras including OV9281, IMX290, IMX327, IMX378, IMX219, IMX477, and IMX708. I have to assume that you can run one DSI display and one CSI camera connection simultaneously, like the NANO-B board, because at the time of writing, Waveshare’s wiki is empty and under construction.

The CM5-DUAL-ETH-BASE is available on AliExpress for $$57.59, on Amazon for $72.99, and $54.99 on Waveshare’s store before the shipping fee is included.

Raspberry Pi CM5 Base Board dimensions

Share this:

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress. We also use affiliate links in articles to earn commissions if you make a purchase after clicking on those links.

Radxa Orion O6 Armv9 mini-ITX motherboard
Subscribe
Notify of
guest
The comment form collects your name, email and content to allow us keep track of the comments placed on the website. Please read and accept our website Terms and Privacy Policy to post a comment.
0 Comments
oldest
newest
Boardcon MINI1126B-P AI vision system-on-module wit Rockchip RV1126B-P SoC