Olimex ESP32-C5-EVB is an evaluation board built around Espressif’s ESP32-C5-WROOM-N8R4 module with dual-band (2.4/5.0GHz) WiFi 6, Bluetooth 5.0 LE, and 802.15.4 (Zigbee/Thread/Matter) wireless connectivity, 8MB flash, and 4MB PSRAM.
The board integrates two relays rated 250V/10A, two opto-isolated inputs, and a LiPo UPS charger and step-up converter. Other features include USB-C ports, a UEXT connector for expansion, and two buttons. It’s one of the first ESP32-C5 boards we’ve seen, after Espressif’s own ESP32-C5-DevKitC-1 development kit, and Wireless Tag’s WT99P4C5-S1 board using the ESP32-C5 as a wireless co-processor to the ESP32-P4 MCU.
Olimex ESP32-C5-EVB specifications:
- Wireless module – ESP32-C5-WROOM-N8R4
- SoC – Espressif Systems ESP32-C5
- CPU
- Single-core 32-bit RISC-V processor @ up to 240 MHz
- Low-power RISC-V core @ 40 MHz acting as the main processor for power-sensitive applications
- Memory – 384 KB SRAM on-chip, support for external PSRAM
- Storage – 320 KB ROM, support for external flash
- Connectivity
- Dual-band 802.11ax WiFi 6 in the 2.4GHz and 5 GHz bands, with 802.11b/g/n WiFi 4 standard support for backward compatibility
- Bluetooth 5.0 Low Energy (LE)
- 802.15.4 radio for Zigbee 3.0, Thread 1.3, and Matter
- CPU
- Memory – 4MB PSRAM
- Storage – 8MB SPI flash
- PCB antenna
- SoC – Espressif Systems ESP32-C5
- USB
- USB-C port for power & debugging
- USB-C JTAG port
- Relays – 2x SUN HOLD RAS-0515 relays rated 250V / 10A with 3-pin terminal blocks
- Expansion
- 2x opto-isolated inputs via terminal block
- 10-pin UEXT connector for Olimex expansion modules
- 9-pin unpopulated header with 5x GPIO, ESP_EN, 5V, 3.3V, and GND
- Misc – Boot & Reset buttons
- Power Supply
- 5V via USB-C port
- LiPo UPS charger & step-up converter; the ESP32-C5-EVB can continue running on battery even if the main power supply is disconnected.
- Dimensions – 80x70mm
Like most (all?) Olimex boards, the ESP32-C5-EVB is open-source hardware with KiCad files (schematics, PCB layout), Gerber files, BoM, etc. available on GitHub along with a user manual.
There’s no firmware yet there, but we’re told the ESP32-C5 is supported by the ESP-IDF 5.5. Since the ESP32-C5-WROOM-N8R4 is a brand new module, popular platforms/firmware like Arduino, PlatformIO, MicroPython, and ESPHome have not been ported to the new dual-band WiFi 6 microcontroller just yet.
Target applications include Smart Home controllers and automation hubs, industrial monitoring and relay switching, remote IoT devices with unreliable power sources, prototyping (dual-band) Wi-Fi 6 IoT products, and multi-protocol IoT gateways.
The ESP32-C5-EVB board can be purchased for 16.95 Euros on the Olimex store, and a bit less if you order multiple boards.
Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.
Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress. We also use affiliate links in articles to earn commissions if you make a purchase after clicking on those links.
