Posted on by Jean-Luc Aufranc (CNXSoft) - 272 Comments on Giveaway Week 2025 – Elecrow Pi Terminal Raspberry CM4 industrial HMI display

Giveaway Week 2025 – Elecrow Pi Terminal Raspberry CM4 industrial HMI display

Sometimes we receive samples even though we did not ask for them, said we would have time to review them, or due to miscommunication. That’s exactly what has happened with the Elecrow Pi Terminal, a Raspberry Pi CM4-powered industrial HMI with a 7-inch touchscreen display.

So instead of letting it go to waste, I decided to offer it as the second prize of the CNX Software Giveaway Week 2025 contest.

Elecrow CrowPanel CM4 Pi Terminal Demo application
Demo application on the Pi Terminal – There’s an option to go to the Raspberry Pi OS desktop

Elecrow Pi Terminal specifications:

  • SoM – Raspberry Pi CM4 Lite
    • SoC – Broadcom BCM2711
      • CPU – Quad-core Cortex-A72 SoC @ 1.5GHz
      • GPU – VideoCore VI with support for OpenGL ES 3.1 and Vulkan 1.0
      • VPU
        • Decode – H.265/HEVC up to 4Kp60, H.264 up to 1080p60
        • Encode – H.264 up to 1080p30
    • Memory – 4GB LPDDR4-3200
    • Storage – N/A
    • Wireless – Dual-band WiFi 5 and Bluetooth 5.0
  • Storage
    • 64GB microSD card preloaded with the Raspberry Pi OS + Node-RED software
    • M.2 NVMe SSD socket compatible with 2230/2242/2280 modules;
  • Display – 7-inch touchscreen IPS display with 1024×600 resolution, 400 cd/m² brightness, 5-point capacitive touch
  • Video Output – HDMI port
  • Camera – 2x camera FPC/FFC connectors (3.3V)
  • Audio
    • 3.5mm audio jack
    • 6-pin speaker Interface
    • Built-in buzzer
  • Networking and wireless connectivity
    • Gigabit Ethernet RJ45 port with optional PoE via 4-pin internal header
    • WiFi 5 and Bluetooth 5.0 on the CM4 Lite module
    • LoRa
      • Via mini PCIE socket; supply voltage: 3.3V
      • Also support LR1302 LoRaWAN SPI/USB interface gateway module
    • 4G LTE cellular
      • Via Mini PCIe socket (supply voltage: 3.8V) and Nano SIM card slot
      • Supports ELE7670 4G series modules
    • 4x removable antenna holes reserved for external SMA antennas
  • USB – 2x USB 2.0 Type-A ports, 2x 4-pin USB 2.0 headers
  • Serial – RS232 DB9 female connector
  • Expansion
    • 12-pin terminal block with RS485/CAN/ADC
    • 8-pin terminal block with 2x DI/DO
    • 6-pin terminal block for relay
    • 4-pin connector for programming button interface
    • 40-pin GPIO header
  • Debugging – Serial console via USB Type-C port
  • Misc
    • Power and Sleep/Wake buttons
    • Power, User, and status LEDs
    • RTC clock with CR1220 battery holder
    • 4-pin fan connector
  • Power Supply – 12V to 36V DC (3A)
  • Power Consumption – About 9W under load
  • Dimensions
    • With shell – 192 x 125 x 46mm
    • Without acrylic shell – 182 x 115 x 29mm
  • Weight – 1 kg with shell
  • Temperature Range – Operating: -10 to +60°C; storage: -20 to 70°C
  • Relative humidity – 10% to 90%, at 40°C (non-condensing)
  • IP Rating – IP65 (front panel)

Elecrow Pi Terminal CNX SOftware Giveaway Week 2025

The giveaway includes the Pi Terminal with the Raspberry Pi CM4 Lite 4GB wireless, three Phoenix type Connectors, a Wi-Fi antenna, a 12V/2A power adapter, a user manual, and an LR1302 LoRaWAN gateway module (SPI US915). Everything is new, and I just opened the package to make sure the unit was working properly. The shipping fee is on the high side because the package is quite heavy at over 1.3kg.

To enter the draw, simply leave a comment with your country and whatever else you’d like to say (no links in the body of the comment). If the country is missing, I’ll consider the entry void. Other rules are as follows:

  • Only one entry per contest. I will filter out entries with the same IP and/or email address.
  • Contests are open for 48 hours starting at 10 am (Bangkok time) every day.
  • Comments will be closed after 48 hours. If comments are open, the contest is still going on.
  • Winners will be selected with random.org, and announced in the comments section of each giveaway.
  • I’ll contact the winner by email, and I’ll expect an answer within 24 hours, or I’ll pick another winner. Note that I may not be able to contact people who log in with Facebook, Twitter, or Google, so it’s better to use an email address to enter the draw.
  • Shipping
    • $49 for registered airmail small packet or ePacket for overseas shipping, payable via PayPal within 48 hours once the contest (for a given product) is complete. If PayPal is not an option in your country, we can try to find another payment solution.
    • All prizes will be shipped at the same time once we get all the winners, around November 12.
  • I’ll make sure we have 7 different winners, so if you have already won a device during this giveaway week, I’ll draw another person.

If you don’t end up winning, the Pi Terminal offered here sells for $152.92 on the Elecrow store, and the LoRaWAN gateway module adds $23.90.

Share this:
FacebookTwitterHacker NewsSlashdotRedditLinkedInPinterestFlipboardMeWeLineEmailShare

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress. We also use affiliate links in articles to earn commissions if you make a purchase after clicking on those links.

Radxa Orion O6 Armv9 mini-ITX motherboard

272 Replies to “Giveaway Week 2025 – Elecrow Pi Terminal Raspberry CM4 industrial HMI display”

  51. Netherlands

    What a great device to start tinkering with. Home Assistant, or something custom. Maybe even a network admin panel. Can’t wait!

  112. I come from Indonesia and I wish there’s a specialized store like this in my country.

  138. Japan

  192. New Zealand. Looking to dabble with LoRaWAN, this would be a great starting point!

  194. USA

    I wrote a software CHIP8 emulator and I have this idea to convert it into an actual physical device. But I don’t know much about the hardware side of things so I like to lurk at sites like this to learn more.

  226. I wonder what it would take to turn this into an offline cnc controller.

    USA

  240. Austria – this would make a really nice Outdoor-Dashboard for Home Assistant 🙂

  263. Winter is coming, it’s snow outside I need something new to play in home 😁
    Is it only me or everyone is like this in
    Canada

Comments are closed.

Boardcon MINI1126B-P AI vision system-on-module wit Rockchip RV1126B-P SoC
Boardcon MINI1126B-P AI vision system-on-module wit Rockchip RV1126B-P SoC