Advantech MIO-5356 is the very first hardware platform based on the upcoming Intel Core Series 3 (Core 300) “Wildcat Lake” SoC we’ve seen. It’s a 3.5-inch SBC designed for industrial applications and powered by up to the Intel Core 7 350 hexa-core processor.
The fanless board supports up to 64GB DDR5 memory, NVMe SSD storage, up to three independent displays via USB-C, HDMI, and LVDS interface, 2.5GbE and GbE networking with TSN and OOB management, and WiFi, Bluetooth, and Cellular connectivity via M.2 sockets. It also features audio connectors, six USB interfaces, RS232/RS485 and CAN Bus interfaces, and more.
Advantech MIO-5356 specifications:
- Wildcat Lake SoC (one or the other)
- Intel Core 3 305 hexa-core CPU with 2x P cores @ 1.5 GHz / 4.4 GHz (Turbo) and 4x LPE cores, 16x EU Intel graphics @ 2.3 GHz; TDP: 15W
- Intel Core 5 320 hexa-core CPU with 2x P cores @ 1.5 GHz / 4.6 GHz (Turbo) and 4x LPE cores, 32x EU Intel graphics @ 2.5 GHz; TDP: 15W
- Intel Core 7 350 hexa-core CPU with 2x P cores @ 1.5 GHz / 4.8 GHz (Turbo) and 4x LPE cores, 32x EU Intel graphics @ 2.6 GHz; TDP: 15W
- System Memory – Up to 64GB DDR5-6400; (note: dual-channel support mentioned in the datasheet, but likely an error)
- Storage – NVMe SSD via 1x M.2 M-Key 2280 socket (note: the specs list two sockets, but it’s probably just one, as shown in the block diagram)
- Video Output
- 1x DP 1.4a, 1x DP2.1 via USB-C ports
- HDMI 2.1
- LVDS + 12V/5V inverter
- Up to 3x simultaneous displays: HDMI + USB Type-C + LVDS
- Audio
- Realtek ALC888S audio codec
- Line-in, Line-out, MIC connectors
- Networking
- 2.5 Gbps Ethernet RJ45 port via Intel i226 2.5GbE controller with TSN support; PoE supports with optional MIOe-TCDP module
- Gigabit Ethernet RJ45 port via Intel i210 GbE controller; support for EdgeBMC Out-of-Band(OOB) remote control
- Optional WiFi and Bluetooth via M.2 E-Key module
- Optional 4G LTE/5G via M.2 B-Key module and Nano SIM card slot
- USB
- 1x USB4 Type-C port with DisplayPort 2.1 Alt. mode; note: marked as an internal connector, likely because it’s on the right side in the photo above.
- 1x USB 3.2 Type-C port with DisplayPort 1.4 Alt. mode, optional 100W USB PD support
- 2x USB 3.2 Type-A ports
- 2x USB 2.0 Type-A ports
- Serial
- 2x RS-232/422/485 (4-wire) connectors
- CAN FD connector
- Expansion
- M.2 E-Key 2230 socket (PCIe x 1, USB2.0)
- M.2 B-Key 3052 socket (PCIe x 1, USB2.0) with Nano SIM card slot
- 2x M.2 M-Key 2280 sockets (PCIe x 2)
- 1x I2C (optional SMBus)
- 8-bit GPIO
- Security – TPM 2.0
- Misc
- 4-wire smart fan
- Front panel header with power-on, reset, buzzer, and case open signals
- Watchdog timer
- 3V/210mAh RTC battery
- Fanless heatsink for cooling
- Power Supply
- 12-24V DC via 4-pin 90D ATX connector, optional DC jack or ATX 4-pin 180D connector; AT or ATX mode
- Up to 100W via USB PD using an optional MIOe-TCDP module
- Dimensions – 146 x 102 mm (3.5-inch SBC)
- Temperature Range – 0 ~ 60°C
- Humidity
- Operating: 40°C @ 95% relative humidity, non-condensing
- Storage: 60°C @ 95%relative humidity, non-condensing
- Vibration Resistance – 3.5 Grms
- Certifications – CE, FCC Class B
The product page is tagged as “preliminary”, and there are some inconsistencies. For instance, the MIO-5356 specs list two M.2 M-Key sockets, but I can only see one in the block diagram above, and this makes more sense since Wildcat Lake is limited to 6 PCIe lanes. The M-Key socket has two PCIe Gen4 lanes, corresponding to up to 8GB/s (bidirectional) transfer rates, or 32 GT/s in one direction, or about the same as PCIe Gen3 x4. The TDP appears to be configurable from 10W to 28W according to the block diagram above.
The datasheet corroborates the leak we had for the Intel Core 5 320 and Core 7 350 last week, and introduces a new Intel Core 3 305 hexa-core SoC. Advantech lists support for Windows 11 IoT Enterprise LTSC 2024 and Ubuntu Desktop 24.04 LTS for the Wildcat Lake SBC.
A few more details may be found on the product page, where you’ll mostly find the PDF datasheet for now.
Thanks to Anonymous for the tip.
Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.
Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress. We also use affiliate links in articles to earn commissions if you make a purchase after clicking on those links.
