You searched for CT clamp - CNX Software

AgroSense 2 Channel LoRaWAN AC Current Monitor

June 18, 2025June 18, 2025

Dual-channel LoRaWAN AC energy meter features 10A/100A CT clamps, measures temperature and humidity

The AgroSense AGLW2CT is a dual-channel LoRaWAN-based industrial AC energy meter that utilizes 10A and 100A CT clamps to measure power consumption non-invasively. The device features two 0–5V analog inputs for the clamps, an AHT20 temperature & humidity sensor, and local storage for 3,300+ records. It supports LoRaWAN 1.0.3 OTAA Class C and works with TTN, Datacake, and CloudStudio. The device operates within the -40°C to 85°C industrial temperature range and is suitable for contactless current sensing, overload/no-load detection, and machine health monitoring. We had previously covered, and even reviewed, several Wi-Fi-connected CT clamps meters such as the MachineQ’s MQpower CT, Seeed Studio’s XIAO-2CH-EM, and Emporia’s Vue Gen 2 energy monitor, but it’s the first time we’ve come across a LoRa AC energy meter with CT clamps. Earlier this month, we noticed the MOKO LW005-MP LoRaWAN Smart Plug and power meter, but it relies on direct AC power measurements and […]

XIAO 2-channel Wi-Fi AC Energy Meter Review

June 6, 2025June 6, 2025

Seeed Studio XIAO-2CH-EM Review: 2-Channel Wi-Fi AC Energy Meter with two CT clamps, ESPHome preloaded

We have received a review sample of an energy metering device from SeeedStudio called the XIAO 2-Channel Wi-Fi AC Energy Meter (XIAO-2CH-EM). This device uses a clamp-on CT (Current Transformer) method on the live wire that you want to measure, without needing to modify the existing electrical wiring. XIAO-2CH-EM comes with several key features such as dual CT sensors (CT1 and CT2), native ESPHome & Home Assistant Integration, precise measurement with factory calibration, and bi-directional power flow monitoring. While the XIAO-2CH-EM has 2 CT input ports, it will only ship with one CT clamp by default, but users can purchase an additional CT clamp if needed. The two CT channels operate independently, and each one can measure bidirectional power and supports devices using up to 100A of current. That should be enough for an ordinary home. The XIAO-2CH-EM comes pre-flashed with ESPHome firmware from the factory, meaning it can be […]

XIAO 2-channel Wi-Fi AC Energy Meter runs ESPHome on ESP32-C6 module, comes with two 100A CT clamps

Seeed Studio’s XIAO 2-channel Wi-Fi AC Energy Meter is an ESP32-C6 (XIAO ESP32-C6) powered power meter with two independent CT clamp (Current Transformer clamp) connectors to safely measure power consumption when placed around one of the wires from an AC cable. We reviewed the SONOFF POW Ring single-channel WiFi CT clamp power meter with eWelink and Home Assistant last year, and before that, we also covered models supporting multiple CT clamps, up to 16 clamps with the Emporia Vue Gen 2 energy monitor. The XIAO 2-channel Wi-Fi AC Energy Meter offers a middle ground with support for two CT clamps measuring up to 100A per channel. XIAO 2-channel Wi-Fi AC Energy Meter specifications: Wireless module – XIAO ESP32C6 board Wireless MCU – Espressif Systems ESP32-C6 CPU Single-core 32-bit RISC-V clocked up to 160 MHz Low-power RISC-V core @ up to 20 MHz Memory – 512KB SRAM, 16KB low-power SRAM Storage […]

September 23, 2024October 2, 2024

MachineQ MQpower CT battery-less LoRa CT clamp measures up to 250A of current

MachineQ has recently introduced MQpower CT, a self-powered, IoT-enabled, LoRa CT clamp designed to monitor real-time current consumption. This CT clamp can measure both accumulated (Ah) and instantaneous current(A) with loads up to 100A and 250A with 1mA resolution. Additionally, it integrates a LoRa module for communication that gets powered by the induced current in the clamp itself. These features make this device useful for energy management, proactive maintenance, power monitoring, and more. We have covered various WI-Fi CT clamps in the past like the SONOFF POW Ring, the Emporia Vue Gen2 with 16 CT clamps, the ESP32-S2-based “smart power meter”, and more. Feel free to check those out if you are interested in Wi-Fi CT clamps. MQpower LoRa CT clamp specifications Connectivity – LoRaWAN Measurement range Up to 100A or 250A models 1mA resolution Accuracy ±1% (>5Arms) ±3% (≤5Arms) Misc Onboard reboot button and LED status indicator FUOTA (Firmware Update Over […]

March 20, 2024March 19, 2024

SONOFF POW Ring Review – A WiFi CT Clamp power meter tested with eWelink and Home Assistant

The trend of measuring the energy usage of household electrical devices has become increasingly popular among Smart Home users in the past few years. We have received the new SONOFF POW Ring Smart Power Meter Switch device for review from ITEAD. Unlike SONOFF’s existing energy monitoring devices such as POW Elite, SPM, DualR3, POW3, and POW Origin, this new device, also called POWCT, utilizes a current transformer (CT) to measure the current flow, or total power being consumed. This method provides no physical contact with live wires and reduces the risk during installation. Additionally, it can measure currents of up to 100A, which is significantly higher than previous models. This makes it suitable for measuring electricity usage at the main circuit breaker, energy generated from solar panels, or even for Electric Vehicle (EV) home chargers. The SONOFF POW Ring, which we are testing today, is not only a Smart Power […]

January 10, 2024January 10, 2024

Emporia Vue Gen 2 energy monitor ships with 16 CT clamps, supports single and three-phase power

We’ve just written about the “Smart Powermeter” measuring the power consumption of AC appliances through six CT clamps and running either ESPHome or Arduino firmware on ESP32-S3 WiFi and Bluetooth microcontroller. Some people asked about tri-phase and having more CT clamps. One of the commenters then recommended readers to look at the Emporia Vue energy monitor that ships with 16 CT clamps for individual devices/rooms, two 200A CT clamps for whole house monitoring, and supports single-phase up to 240VAC line-neutral, single, split-phase 120/240VAC, and three-phase up to 415Y/240VAC (no Delta). So let’s do that now. Emporia Vue Gen 2 specifications: Connectivity – 2.4 GHz WiFi 4 Probes 2x 200A current sensors for service mains; 3.5mm plug; dimensions: 65 x 44 x 41mm 16x 50A current sensors to individually monitor air conditioner, furnace, water heater, washer, dryer, range, etc; 2.5mm plug, dimensions: 41 x 23 x 26; accurate from ±2% […]

January 7, 2024

ESPHome compatible “Smart Powermeter” supports up to 6 CT clamps

J.G.Aguado’s “Smart Powermeter” is an ESP32-S2 board with a 2.9-inch e-paper display designed to measure power consumption through up to six CT clamps, or Current Transformer clamps, that are each attached to one of the AC lines of a house or appliance. I used an MT87 Digital Clamp Multimeter nearly 10 years ago to easily and safely measure the power consumption of a whole house by simply clamping it on one of the cables outside and reading the results on the display. The Smart Powermeter works in the same way but can perform measurements for up to six devices, and besides seeing the results on the display the ESP32-S2 can also send the data to the cloud or local server for data gathering and analysis using ESPHome or Arduino firmware. Smart Powermeter specifications: Wireless module – ESP32-S2-MINI-1-N4R2 SoC – Espressif ESP32-S2FH4 CPU Single-core 32-bit LX7 microcontroller @ up to 240 […]

August 19, 2024August 19, 2024

Toshiba TCKE9 reusable e-fuse features a fixed over-voltage clamp with adjustable overcurrent limit

Toshiba has recently introduced the Toshiba TCKE9 reusable e-fuse (electronic fuse) series, a new lineup of e-fuse ICs that can be used repeatedly, to protect power supply lines from various electrical faults like overcurrent, overvoltage, overtemperature, and short circuits. These new chips integrate various protection features into a single chip which simplifies circuit design and reduces component count compared to how a traditional protection circuit with multiple components is designed. This new line of products offers different ICs with different voltage ratings and adjustable current settings, alongside two reset modes auto-retry and latching. All these features make this e-fuse useful for applications like laptops, wearables, audio/video equipment, and industrial applications like automation systems, robotics, and many other applications. Toshiba TCKE9 reusable e-fuse Specification Input Voltage – 2.7V to 23V (Maximum – 25V) Output Current – 0 to 4.0A (Adjustable overcurrent limit – 0.5A to 4.0A via external resistor) ON Resistance […]