MaUWB for Home Assistant
Posted on

Makerfabs MaUWB for Home Assistant – An ESP32-S3 UWB module with PoE and enclosure

Makerfabs MaUWB for Home Assistant is an ESP32-S3-based Ultra-Wideband (UWB) module designed for indoor positioning and Real-Time Location Systems (RTLS). It runs ESPHome for Home Assistant integration, enabling it to be used as part of a UWB-based positioning system to track tagged devices in homes, offices, and other indoor environments. The module combines an ESP32-S3 with a MaUWB UWB module based on the Qorvo DW3000, featuring a PA/LNA for long-range ranging. Compared to the earlier ESP32-S3 version, it drops the OLED and adds a WIZnet W5500 Ethernet controller that supports PoE. The module also supports Wi-Fi 4 and Bluetooth 5.0, and comes in an enclosure for fixed installations. Makerfabs MaUWB for Home Assistant specifications: Wireless Module – ESP32-S3-WROOM-1 SoC – Espressif Systems ESP32-S3 CPU – Dual-core Tensilica LX7 up to 240 MHz with vector extension for AI/ML workloads RAM – 512KB SRAM; 8MB PSRAM Wireless – WiFi 4 and Bluetooth LE 5 […]

Unit PoE with ESP32 P4
Posted on

M5Stack Unit PoE-P4 – A tiny PoE-powered ESP32-P4 development kit with MIPI DSI/CSI and USB-C connectors

The M5Stack Unit PoE-P4 is a tiny, PoE-powered development kit built around the ESP32-P4NRW32 SoC. The module integrates a 10/100Mbps Ethernet PHY, supports IEEE 802.3at PoE for single-cable power and data, and provides MIPI DSI/CSI display and camera interfaces. It’s designed as a network-enabled node with built-in PoE (up to 6W output), a USB Type-C host port, and a separate USB Type-C OTG/download interface, along with an RGB LED, IR transmitter, user button, Grove (HY2.0-4P) port, Hat expansion header, and SDIO/ISP expansion interfaces, making it suitable for industrial HMI panels, PoE smart terminals, camera/vision acquisition nodes, smart home controllers, and edge computing devices. M5Stack Unit PoE-P4 specifications: SoC – Espressif Systems ESP32-P4NRW32 CPU Dual-core 32-bit RISC-V HP (High-performance) CPU @ up to 400 MHz with AI instructions extension and single-precision FPU Single-RISC-V LP (Low-power) MCU core @ up to 40 MHz Memory 768 KB HP L2MEM (for dual-core CPU), 32 KB […]

Sponsored
Sponsored
Sponsored
ESP32 P4 WIFI6 POE ETH
Posted on

Waveshare ESP32-P4 + ESP32-C6 PoE development board targets HMI and IoT applications

Waveshare has recently launched ESP32-P4-WIFI6-POE-ETH, a compact development board with Wi-Fi 6, Bluetooth 5 (LE), OTG, Ethernet, and PoE support, for various HMI and IoT applications. The board supports 100Mbps Ethernet with PoE, MIPI-CSI, MIPI-DSI, USB 2.0 OTG, audio codec + amplifier, microphone, MicroSD card slot, and 40-pin GPIO expansion. Other peripherals include I2S, I2C, SPI, UART, PWM, MCPWM, RMT, ADC, and TWAI, alongside security features like secure boot, flash encryption, crypto accelerators, TRNG, and privilege separation. These features make it suitable for HMI terminals, smart panels, multimedia control interfaces, local edge AI, and IoT gateways. Waveshare ESP32-P4-WIFI6-POE-ETH specifications: Wireless module – ESP32-P4-Core Microcontroller – ESP32-P4NRW32 MCU Dual-core RISC-V microcontroller @ 400 MHz with AI instructions extension and single-precision FPU Single-RISC-V LP (Low-power) MCU core @ up to 40 MHz GPU – 2D Pixel Processing Accelerator (PPA) VPU – H.264 and JPEG codecs support Memory – 768 KB HP L2MEM, […]

SONOFF Dongle Max
Posted on

SONOFF Dongle Max (Dongle-M) – A PoE-based Zigbee/Thread gateway with ESP32 and MG24 chips

As expected, SONOFF has now launched the Dongle Max (also known as Dongle-M) Zigbee coordinator and Thread Border Router with Ethernet, WiFi, and USB connectivity. The company also highlights PoE or USB power supply options, web console access, and support for advanced features such as Webhooks, MQTT, WireGuard VPN, and Turbo mode. SONOFF Dongle Max specifications: Wireless SoCs Silicon Labs EFR32MG24 MCU core – Arm Cortex-M33 MCU @ 78 MHz Memory – 256 KB RAM (300% more RAM than ZBDongle-E) Storage – 1536 KB flash (twice the flash of ZBDongle-E) Radios/Protocols – 802.15.4, Matter, OpenThread, Zigbee 3.0, BLE, Bluetooth Mesh, Proprietary 2.4 GHz, Multiprotocol Espressif Systems ESP32-D0WDR2-V3 MCU cores – Dual-core Xtensa LX6 32-bit microprocessor up to 240 MHz Memory – 520 KB SRAM + 2 MB embedded PSRAM Wireless – 2.4 GHz 802.11 b/g/n WiFi 4 and Bluetooth: v4.2 + EDR Storage – 16MB flash for ESP32 Wired networking […]

Waveshare ESP32 P4 ETH Edge AI dev baord with ESP32 P4 and Ethernet
Posted on

Waveshare ESP32-P4-ETH development board supports Ethernet and PoE

Waveshare ESP32-P4-ETH is a compact ESP32-P4 development board with Ethernet and PoE support, which looks very similar to the Olimex ESP32-P4-DevKit minus the pUEXT connector. However, we’ve also covered other ESP32-P4 boards with Ethernet (and other features) such as the ESP32-P4-Module-DEV-KIT, the ESP32-P4-NANO board, and the GUITION JC-ESP32P4-M3-DEV. Design wise, the board also looks very similar to the Wiznet boards based on Raspberry Pi RP2xxx microcontroller such as the W55RP20-EVB-Pico, the W6300-EVB-Pico2, and the W5100S-EVB-Pico2 boards, but you can also run multimedia workloads with MIPI camera and display interfaces, hardware video encoding, audio processing, AI speech functions, and advanced security features on the ESP32-P4-ETH board. Waveshare ESP32-P4-ETH specifications: SoC – Espressif Systems ESP32-P4 CPU Dual-core 32-bit RISC-V HP (High-performance) CPU @ up to 400 MHz with AI instructions extension and single-precision FPU Single-RISC-V LP (Low-power) MCU core @ up to 40 MHz Memory 768 KB HP L2MEM (for dual-core CPU), 32 […]

Esp32 Stick PoE A Cam(N16R8) ESP32 s3 camera PoE board
Posted on

ESP32-Stick-PoE-A-Cam – An ESP32-S3 camera board with active PoE, machine learning examples

The ESP32-Stick-PoE-A-Cam(N16R8) is an open-source ESP32-S3 development board with Ethernet, camera, and active PoE support designed for machine learning applications. Compared to similar boards like M5Stack M5PoECAM-W V1.1 and the Waveshare ESP32-S3-ETH, this board features 17 usable GPIO, active PoE (IEEE 802.3af) with 700mA power delivered, built-in USB-UART, and pin-to-pin compatibility across Stick-Cam boards. Built around the ESP32-S3 SoC, this module supports OV2640 and OV5640 cameras and integrates the W5500 Ethernet controller and Si3404-A PoE chip for power and connectivity. The board has a total of 36 GPIOs, of which 17 are free when using Ethernet and a camera. Applications include remote surveillance, smart home automation, edge AI processing, and other IoT applications. ESP32-Stick-PoE-A-Cam(N16R8) specifications: Wireless module ESP32-S3R8 MCU – ESP32-S3 dual-core LX7 microprocessor @ up to 240 MHz with Vector extension for machine learning Memory – 8MB PSRAM Storage – 16MB SPI flash Connectivity – WiFi 4 and Bluetooth 5 with […]

Advertisement

XIAO W5500 Ethernet Adapter
Posted on

XIAO W5500 Ethernet Adapter: PoE-enabled ESP32-S3 device aims to improve network reliability

Seeed Studio has recently announced the XIAO W5500 Ethernet Adapter with Power over Ethernet (PoE) support and built around the XIAO ESP32S3 Plus WiFi and Bluetooth module, and a WIZnet W5500 10/100 Mbps Ethernet SPI controller. PoE is implemented through an MQ7813T120 module and a 5V regulator with a TPS563201 buck converter. The XIAO W5500 also features an external 2.4GHz antenna for WiFi and BLE, a reset button, status LEDs, and a USB-C port for power and programming, all enclosed in a 3D printed case. XIAO W5500 Ethernet Adapter specifications: Main Module – XIAO ESP32-S3 Plus module Networking Wireless – External 2.4GHz antenna (2.81dBi) for WiFi and BLE Ethernet W5500 Ethernet controller 10/100 Mbps Ethernet with RJ45 connector  Integrated isolated PoE module for data + power USB – USB Type-C connector for power and programming Misc Power and User LED Reset buttons Power MQ7813T120 PoE module with isolation (IEEE 802.3af-compliant); 86% […]

Hornet Nest home security panel in operation
Posted on

Hornet Nest Alarm Panel – An Home Assistant-compatible, ESP32 home security automation platform with PoE and 42-zone support (Crowdfunding)

The Hornet Nest Alarm Panel is a customizable, ESP32-based alarm control system designed and produced by US-based Technology Automation Consulting for home security automation. The device is powered by the wESP32 Ethernet board with PoE support and is compatible with Home Assistant through the ESPHome firmware. It features up to forty-two optoisolated zones, six MOSFET-controlled outputs, and six additional trigger outputs for 3.3V devices. It integrates a piezo buzzer and supports add-ons like a Wiegand keypad and water leak sensors. The Hornet Nest Alarm ESP32-based home security platform “aims to bridge the gap between traditional wired security systems and the flexibility of modern smart home automation.” Christopher Greenless of Technology Automation Consulting says the project was born from his need for a robust and smart security system to integrate with his Home Assistant setup. Proprietary solutions were inadequate and limited while DIY options were inefficient and often unreliable. He created […]

Boardcon MINI1126B-P AI vision system-on-module wit Rockchip RV1126B-P SoC