You searched for RP2350B - CNX Software

June 24, 2026June 26, 2026

RP2350B bells&whistles development board features on-board RP2040 debugger, HDMI, and microSD card slot

While searching Tindie for a new project, I found a new Raspberry Pi RP2350B-based development board called “Bells&Whistles,” which is interesting because it also features an onboard RP2040-based debugger running Picoprobe firmware, removing the need for a separate debug probe. Other than that, it has an HDMI output, a MicroSD card slot for storage, an optional 8 MB of PSRAM, and since it uses the Raspberry Pi RP2350B variant, it supports up to 46 GPIO pins. The board also features two USB Type-C ports, one for the RP2350B and the other for the RP2040 debugger, and is especially useful for clutter-free rapid prototyping and development workflows. RP2350B bells&whistles board specifications: SoC – Raspberry Pi RP2350B CPU Dual-core Arm Cortex-M33 @ 150 MHz with Arm TrustZone Dual-core RISC-V Hazard3 @ 150 MHz Only two cores can be used at any given time Memory – 520 KB on-chip SRAM Package – QFN-80 Memory – […]

June 1, 2026June 2, 2026

Waveshare RP2350B-Plus-W – A Raspberry Pi Pico 2 W-sized board with 41 GPIOs, 16MB flash, USB-C port

Waveshare RP2350B-Plus-W is a development board that follows the Raspberry Pi Pico 2 W form factor, but offers 41 GPIOs thanks to the RP2350B MCU, integrates 16 MB of flash, and includes a USB-C port. So, in several ways, it’s an upgrade over the RP2350A-based official board, which offers only 26 GPIOs via two 13-pin GPIO headers, 4MB of flash, and a micro USB port. Since it’s the same size, where do the extra GPIOs come from? Answer: The company simply added 15 pads to the bottom of the board, not quite as convenient since it’s requires soldering, but it does the job. Waveshare RP2350B-Plus-W specifications: SoC – Raspberry Pi RP2350B CPU Dual-core Arm Cortex-M33 @ 150 MHz with Arm Trustzone Dual-core RISC-V Hazard3 @ 150 MHz Only two cores can be used at any given time Memory – 520 KB on-chip SRAM Package – QFN-80 Memory – Footprint […]

picoZ80 – A Z80 microprocessor drop-in replacement based on Raspberry Pi RP2350B and ESP32

The picoZ80 board is a drop-in replacement for the Z80 microprocessor based on the Raspberry Pi RP2350B dual-core Cortex-M33 microcontroller and an ESP32 wireless SoC for WiFi and Bluetooth connectivity. My first computer was a ZX81 powered by a Zilog Z80 microprocessor, which was eventually phased out in 2024 after almost 50 years of production. But retro computing enthusiasts keep the platform alive, usually with softcore FPGA implementations such as MiSTer. The picoZ80 is different as it relies on the programmable I/O (PIO) state machines from the RP2350B MCU to reproduce cycle-accurate address, data, and control buses of the Z80 MPU. picoZ80 specifications: MCU – Raspberry Pi RP2350B CPU – Dual-core Arm Cortex-M33 CPU @ up to 150/300 MHz (the two RISC-V cores do not appear to be used by the project) Memory – 520KB SRAM Storage – 8KB OTP flash Package – QFN-80 Memory – 8MB PSRAM Storage 16MB flash […]

pico2 ice Raspberry Pi RP2350B + iCE40UP5K FPGA development baord

August 19, 2025August 19, 2025

Pico2-Ice development board combines Raspberry Pi RP2350B with Lattice iCE40UP5K FPGA

tinyVision.ai has recently released the second-generation ot its open-source hardware pico-ice FPGA development board, upgrading the Raspberry Pi RP2040 to the newer RP2350B along with dedicated user LEDs and buttons for both the MCU and the FPGA. The Pico2-Ice also exposes the RP2350B’s HSTX interface through a 22-pin connector, while keeping the same Lattice iCE40UP5K FPGA. The onboard iCE40UP5K FPGA features 5.3k LUTs, 1 MB SPRAM, and 120 KB DPRAM, along with 4MB SPI flash and 8MB low-power PSRAM. The board also exposes all RP2350 pins and 32 FPGA GPIOs via 2.54mm pitch headers in Pmod format. It includes two RGB LEDs and two pushbuttons (separately mapped to the MCU and the FPGA), and integrates onboard 3.3V/1.2V regulators for power. These features make this board suitable for exploring HDLs, embedded systems, and FPGA programming with open-source tools. Pico2-Ice specifications: Microcontroller – Raspberry Pi RP2350B MCU CPU – Dual-core Arm Cortex-M33 processor @ […]

July 1, 2025

Olimex RP2350pc computer board features Raspberry Pi RP2350B MCU, HDMI/DVI video output, 4x USB ports

Olimex has launched an update to its RP2040pc computer board with the RP2350pc board powered by a Raspberry Pi RP2350B MCU coupled with 16MB flash, 8MB PSRAM, and offering HDMI/DVI video output, four USB 2.0 ports, and an audio Codec for retro computer emulation and education. Other changes include a microSD card slot for additional storage and an on-board stereo audio codec and amplifier for Line-in and headphone audio jacks, and left and right speakers. That also means the two buzzers from the RP2040 board are gone. The design is now closer to a proper retro computer board. RP2350pc computer board specifications: Microcontroller – Raspberry Pi RP2350B CPU Dual-core Arm Cortex-M33 @ 150 MHz with Arm Trustzone, Secure boot OR Dual-core RISC-V Hazard3 @ 150 MHz Either two cores can be used. Memory – 520 KB on-chip SRAM Package – QFN-80 Memory – 8MB SPRAM Storage 16MB SPI Flash MicroSD […]

February 3, 2025

Tiny WeAct RP2350B Core Board exposes all 48 I/Os from the Raspberry Pi RP2350B microcontroller

WeAct RP2350B Core Board is a small (41.4×41.1mm) USB-C board exposing all 48 I/Os from the Raspberry Pi RP2350B Cortex-M33/RISC-V microcontroller through two 30-pin headers. It offers an alternative to the smaller Solder Party’s RP2350 Stamp XL (44.5 x 25.4 mm) with through and castellated holes and no USB-C port that’s better suited for soldering on a baseboard and to Olimex PICO2-XL and PICO2-XXL open-source hardware boards (50 x 28 mm). WeAct RP2350B Core Board specifications: Microcontroller – Raspberry Pi RP2350B MCU CPU – Dual-core Arm Cortex-M33 processor @ 150MHz Memory – 520KB internal RAM 8KB OTP Storage Package – QFN-80; 10×10 mm Storage 16MB QSPI flash Footprint for a second QSPI FLASH/PSRAM on the bottom side I/Os – All 48x GPIOs broken out via 2x 30-pin headers 2x UART, 2x SPI, 2x I2C 24x PWM 8x ADC 12x PIO state machines HSTX peripheral 5V, 3.3V, VREF, and GND Debugging […]

Olimex PICO2 XL and PICO2 XXL RP2350B Dev board

January 17, 2025January 19, 2025

Open hardware RP2350B boards offer up to 16MB flash, 8MB PSRAM, microSD card slot, 48x GPIOs

Olimex has recently released the PICO2-XL and PICO2-XXL open-source hardware RP2350B development boards with up to 16MB flash, 8MB PSRAM, 48 GPIOs, a microSD card slot, and more. The main difference between the two boards is that the PICO2-XL includes 2MB of external QSPI Flash and a compact flat-bottom design, making it ideal for simpler, space-constrained projects. In contrast, the PICO2-XXL offers 16MB of QSPI Flash, 8MB of PSRAM, and a microSD card slot for expanded storage and performance, catering to more demanding applications like IoT and edge computing. Olimex PICO2-XL and PICO2-XXL specifications SoC – Raspberry Pi RP2350B MCU CPU Dual-core Arm Cortex-M33 @150MHz with Arm Trustzone Dual-core 32-bit Hazard3 RISC-V @ 150MHz Up to two cores can be used at the same time Memory – 520KB SRAM 8kB OTP storage Security – Secure boot Package – QFN-80; 10×10 mm Memory – 8MB PSRAM (PICO2-XXL only) Storage PICO2-XL – […]

October 5, 2024

Pimoroni Pico Plus 2 W combines RP2350B MCU with Raspberry Pi RM2 Wi-Fi and Bluetooth module

Raspberry Pi released the Raspberry Pi Pico 2 a few months ago, featuring the new RP2350 chip. Despite several upgrades, it lacks wireless connectivity like Pico W. While there’s no official Raspberry Pi Pico 2 W yet, Pimoroni has developed an unofficial alternative, the Pimoroni Pico Plus 2 W, which integrates Wi-Fi and Bluetooth using a yet-to-be-formally-announced Raspberry Pi RM2 module and potentially set to appear in a future Pico 2W. The Pimoroni Pico Plus 2W board is powered by the Raspberry Pi RP2350B dual-core Arm Cortex-M33 microcontroller, features 16MB of QSPI flash with XiP support, 8MB of PSRAM, wireless connectivity, a USB Type-C port for power and data, and a Qwiic/STEMMA QT connector for breakout board integration. A few days ago, we covered the Pimoroni Explorer board, an electronic prototyping board built around the Raspberry Pi RP2350B chip. It features a 2.8-inch LCD screen, a speaker connector, and multiple […]