Posted on

TP-Link Archer 802.11ax WiFi 6 Routers Sell for $350 and Up

After NETGEAR and ASUS 802.11.ax WiFi routers introduction earlier this year, TP-Link has now launched their own WiFi 6 routers with Archer AX6000 and Archer AX11000 models. The latter will only be available at the end of January 2019, and full details have not been disclosed yet, but Archer AX6000 has already launched (pre-orders only) and specifications, pricing, and other details are known. TP-Link Archer AX6000 specifications: SoC – Broadcom BCM49408 quad core Cortex A53 processor @ up to 1.8 GHz with network packet co-processor WiFi co-processors – 2x Broadcom BCM43684 802.11ax radios System Memory – 1GB RAM Storage – 128MB Flash Networking Wired 8x 1000/100/10Mbps LAN Ports 1x 2500/2000/1000/100Mbps WAN Port WiFi IEEE 802.11ax/ac/n/a 5GHz up to 4804Mbps IEEE 802.11ax/n/b/g 2.4GHz up to 1148 Mbps Wireless Functions – Enable/Disable Wireless Radio, Guest network, DFS, MU-MIMIO, OFDMA Wireless security – 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryptions 8x High-Performance External Antennas USB […]

Posted on

The First 802.11ax WiFI 6 Routers are Now Shipping for $350 and Up

802.11ax WiFi, to be known as WiFi 6 for consumer, promises a much higher throughput up to 10 Gbps, and a better ability to manage high density scenario (i.e.). crowded places where may users connect at the same time. ASUS announced several 802.11ax routers at CES 2018, and the entry-level model – ASUS RT-AX88U – with a combined maximum throughput of 6000 Mbps (referred to as AX6000) is now sold on Amazon for $349.99. NETGEAR has also unveiled their own WiFi 6 routers with respectively Nighthawk AX80 (RAX80) and Nighthawk AX120 (RAX120) routers. I’ve already covered ASUS routers in a previous post, and the 12-stream RAX120 will only become available in Q1 2019, so I’ll focus on the spaceship looking 8-stream RAX80 router since it’s available now. RAX80 WiFi 6 router specifications: SoC –  Broadcom BCM49408 quad core Cortex-A53 processor @  1.8GHz with network packet co-processor @ 800 MHz WiFi […]

Khadas Edge2 Arm mini PC
Posted on

MediaTek Filogic 860 & Filogic 360 WiFi 7 chipsets target mainstream BE7200 routers and clients

MediaTek has unveiled two new WiFi 7 chipsets with the Filogic 860 tri-core Arm Cortex-A73 SoC designed for up to BE7200 mainstream routers and gateways and Filogic 360 WiFi 7 and Bluetooth 5.4 chip for client devices such as smartphones, PCs, laptops, set-top boxes, OTT streaming boxes, etc… for up to 2.9 Gbps bandwidth. The new Filogic 860 and Filogic 360 chipsets provide more cost-effective alternatives to the Filogic 880 SoC for up to BE36000 routers and Filogic 380 clients chip capable of up to  6.5 Gbps PHY data rate, both of which were introduced in May 2022. MediaTek Filogic 860 Filogic 860 specifications: CPU – 3x Arm Cortex-A73 cores clocked at up to 1.8 GHz Network Processing Unit (NPU) – Hardware QoS acceleration and Tunneling Offload Engine for VLAN / PPTP / L2TP / GRE Networking Crypto engine (EIP-197) – For IPv4 NATP / IPv6 / DS-Lite / 6RD […]

Posted on

Realtek WiFi 7 and WiFi 6 roadmap for routers and clients

We’ve just written about Realtek 5 Gbps Ethernet chips, but the company also has some roadmaps for WiFi 6 and WiFi 7 router chips, and a WiFi 7 client module demonstrated at COMPUTEX 2023. The company’s roadmap include five WiFi 7 router solutions: WiFi 7 BE6500 router with a Realtek 8198DS dual Arm core processor @ 1.2 GHz with an RTL8952AR 2×2 MIMO 5 GHz and 6 GHz chip, RTL8902A 2×2 2.4 GHz chip, and an RTL8221B 2.5GbE PHY WiFi 7 BE9400 router with a Realtek 8198DS dual Arm core processor @ 1.2 GHz with an RTL8952AR 2×2 MIMO 5 GHz chip, RTL8902A 2×2 2.4 GHz chip, an RTL8934AR 4×4 MIMO 6 GHz chip, and an RTL8221B 2.5GbE PHY WiFi 7 BE3400 router with a Realtek 8198DS dual Arm core processor @ 1.2 GHz with an RTL8952AR 2×2 MIMO 5 GHz chip, and an RTL8221B 2.5GbE PHY WiFi 7 BE6400 […]

Posted on

The First Devices and Routers with WiFi 802.11ad Delivering Up 7Gbit/s Transfer Rates at 60 GHz Will Be Available This Year

802.11ad is the latest and fastest WiFi standard working in the 60 GHz band and delivering up to 7 Gbit per second data transmission rates. The 60 GHz  frequency band offers both advantages and disadvantages because it does not penetrate through walls nor water, meaning it can only be used within a room limiting the range, but at the same time it’s more secure since it cannot be snooped from the outside, and for people who worry about health effects it does not penetrate the human body. 802.11ad routers will also be able to switch to 2.4 and 5.0 GHz frequency bands in order to go through walls. The table above nicely summarize the key features of 802.11ad over 802.11ac and 802.11n, however the throughput row shows the theoretical maximum throughput, but in practice, using 802.11ac as example, clients are often limited to 433 or 866 Mbps, and distance and […]

Posted on

GL.iNet Flint 2 router review – Part 2: WiFi 6, 2.5GbE, WireGuard performance

In the first part of the review of the GL.iNet GL-MT6000 “Flint 2” WiFi 6 router, I had a look at the package content and the hardware design with a teardown of the router, and quickly tried it out. I’ve now had more time to play with the router focusing the review on WiFi 6 and 2.5GbE performance, and checking whether of 900 Mbps Wireguard VPN claim had any truth to it. The router also supports the Tor network to anonymously browse the web, Adguard Home to get rid of unwanted ads, and Repeater mode among other features. Those all work with the Fliont 2 router, but I won’t cover those in detail here, and invite you to check out the GL.iNet Brume 2 security gateway review for Tor and Adguard Home and the GL.iNet Beryl AX review for the repeater mode test. Connecting wired and wireless clients The Flint […]

Advertisement

Posted on

Nordic introduces nRF7002 EK WiFi 6 Arduino Shield, nRF7000 SSID-based Wi-Fi locationing chip

Nordic Semi has launched the nRF7002 EK based on the company’s nRF7002 dual-band WiFi 6 IoT chip and in the form of an Arduino shield that works with other Nordic development kits such as the nRF52840 DK, nRF5340 DK, and nRF9160 DK, and separately, the company launched the nRF7000 SSID-based Wi-Fi locationing chip. nRF7002 EK Earlier this year, the company launched the nRF7002 DK, a complete development kit with the nRF7002 WiFi 6 chip and the nRF5340 dual-core Arm Cortex-M33 wireless microcontroller, but for developers who already own nRF devkits, they’ve now introduced the nRF7002 EK Arduino Shield. nRF7002 EK specifications: Wireless chip – Nordic Semi nRF7002 Dual-band Wi-Fi 6 (802.11ax) WiFi station mode Target Wake Time (TWT) 20 MHz channel bandwidth Antenna – 2.4 and 5 GHz antenna for WiFi SWF port for RF measurement Host interface – SPI or QSPI interfaces Dimensions – Arduino shield form factor The […]

Posted on

GL.iNet Flint2 AX6000 router supports up to 900 Mbps WireGuard VPN with MediaTek MT7986 SoC

GL.iNet Flint2 (also known as GL-MT6000) is a new AX6000 router based on MediaTek MT7986 (Filogic 830) Arm SoC and supporting VPN speeds of up to 900 Mbps using WireGuard and 190 Mbps with OpenVPN. This caught my attention, as I previously covered other GL.iNet routers such as the Spitz AX (GL-X3000NR) and the Beryl AX (GL-MT3000) based on the previously generation Filogic 820 (MT7981B) CPU with claims of (only) 300 Mbps transfer rates with Wireguard, so the new model is supposed to triple the VPN performance. GL.iNet Flint2 (GL-MT6000) specifications: SoC – MediaTek MT7986 (Filogic 830) quad-core Arm Cortex A53 processor @ 2.0 GHz with hardware acceleration engines for Wi-Fi offloading and networking System Memory – 1GB DDR4 Storage – 8GB eMMC flash Networking 2x 2.5 Gbps Ethernet ports 4x Gigabit Ethernet LAN ports 802.11b/g/n/ac/ax WiFi 6 with 4x external Wi-Fi antennas Up to 1,148 Mbps @ 2.4 GHz […]

Khadas VIM4 SBC