You searched for cellular data logger - CNX Software

IP67 Battery Powered NB IoT Cellular Data Logger

November 3, 2025November 3, 2025

This battery-powered NB-IoT/LTE-M industrial data logger is designed to run for years

NORVI EC-M12-BC-C6-C-A (or EC-M12 for shorts) is a battery-powered cellular IoT industrial data logger offering NB-IoT and LTE-M connectivity, 2G fallback, two 4-20mA sensor inputs, an RS485 interface, and two 3.6V/19,000mAh non-rechargeable Lithium batteries for up to 5-7 years of operation. The IP67-rated data logger is built around a low-power STM32L072 Arm Cortex-M0+ microcontroller, and features a SIM7070 cellular IoT modem, a microSD card slot for data storage, and a single 8-pin M8 connector carrying analog input and RS485 signals. NORVI EC-M12-BC-C6-C-A specifications: Microcontroller – STMicro STM32L072 Arm Cortex-M0+ MCU clocked at up to 32 MHz with 20 KB of RAM, 192 KB flash with ECC, and 6 KB of data EEPROM with ECC Storage – MicroSD card slot up to 128GB Wireless Connectivity Multi-band 2G, Cat-M1, Cat-NB1 (NB-IoT) via SIMCom SIM7070 module Optional LoRaWAN support RP-SMA male antenna connector Sensor interface via 8-pin M8 female connector 2x analog Inputs […]

Inventia MT 718 PS battery operated telemetry logger with IP68 protection

April 29, 2025April 30, 2025

Inventia MT-718 PS battery-powered IP68 industrial telemetry logger integrates environmental sensors, cellular IoT connectivity

Inventia MT-718 PS is a compact, battery-powered industrial telemetry logger designed for monitoring, logging, and data transmission in industrial and environmental applications, especially in areas where grid power supply and access to infrastructure are limited. It supports 2G/4G LTE Cat 1 or NB-IoT/LTE Cat M1 (eMTC) connectivity, and comes with an IP68-rated waterproof housing, allowing operation under 2 meters of water for up to 24 hours. Key features include five binary/counter inputs, two analog inputs (0–5V with 4–20mA conversion option), and built-in pressure (0–10 bar), temperature, and humidity sensors, as well as RS-485 with Modbus RTU support. The logger also features two digital outputs, can store up to 60,000 records at 1-second intervals, offers an optional OLED display, and supports OTA firmware updates. It is powered by replaceable alkaline or lithium batteries for long-term, maintenance-free operation and includes tamper detection via a lid sensor. The MT-718 OS can be used […]

November 25, 2024November 23, 2024

SparkFun introduces Quadband GNSS RTK Breakout board with Quectel LG290P module for high-precision navigation

SparkFun has released the Quadband GNSS RTK Breakout featuring the Quectel LG290P module designed for high-precision real-time kinematic (RTK) applications. It supports GPS, GLONASS, Galileo, BDS, QZSS, and NavIC constellations, with the ability to simultaneously receive signals from L1, L2, L5, and L6/E6 frequency bands. The module includes support for SBAS augmentation systems (e.g., WAAS, EGNOS, GAGAN) and PPP services (e.g., BDS PPP-B2b, QZSS CLAS), delivering reliable positioning with fast convergence times for precision navigation tasks. The breakout board offers a compact design (43.2 x 43.2mm) and multiple expansion options including 24 PTH pins, dual 4-pin JST Qwiic connectors, three UART interfaces, a USB-C connector, and additional PTH pins for BlueSMiRF/Serial-to-UART. With its RTK support and advanced GNSS capabilities, the board is ideal for applications requiring high-accuracy positioning and robust navigation performance. Previously, we covered several GNSS boards including the SparkFun GNSS L1/L5, u-blox EVK-LEXI-R10, and Conexio Stratus Pro and […]

eModGate X0 ESP32 industrial IoT controller

August 3, 2023

eModGATE Moduino X0 – An ESP32-based industrial IoT controller with battery support

TECHBASE eModGATE Moduino X0 is an industrial IoT control based on a choice of ESP32 modules from Espressif and Pycom, equipped with a battery slot for remote installations, and various interfaces to connect sensors or actuators via RS232, RS485, and/or digital I/Os. We first wrote about TECHBASE Moduino-X series ESP32 IoT endpoints almost six years ago with the X1 and X2 models, but since then the company has added more models such as the large X3 and X4 devices with more I/Os, and the new entry-level Moduino X0 that’s similar to the X1, but with battery support instead of a supercapacitor. eModGATE Moduino X0 specifications: ESP32 wireless module/board options ESP32-WROVER with ESP32 dual-core Tensilica LX6 processor @ 240 MHz, 8MB PSRAM, 4MB or 16MB SPI flash Pycom WiPy 3.0 with 4MB RAM, 8MB Flash Pycom SiPy with 512kB RAM, 4MB Flash, Sigfox Pycom LoPy with 4MB RAM, 8MB Flash, Wi-Fi/BT4.2, […]

October 26, 2020October 27, 2020

Modberry 500 CM4 DIN Rail Industrial Computer Features Raspberry Pi Compute Module 4

We’ve been writing about Techbase Modberry industrial embedded computers with DIN-Rail enclosures such as Modberry M500 or M2000 for several years. Most of their systems are powered by SBC’s like Raspberry Pi 4 or AAEON Up Squared, but they’ve also made models based on Raspberry Pi Compute Module 3+, and with the launch of Raspberry Pi CM4, the company has now introduced Modberry 500 CM4 industrial computer powered by Raspberry Pi Compute Module 4 with up to 8GB RAM and 32GB eMMC flash. Modberry 500 CM4 key features and specifications: SoM – Raspberry Pi Compute Module 4 with Broadcom BCM2711 quad-core Cortex-A72 processor @ 1.5 GHz, 1 to 8GB RAM, up to 32GB eMMC flash. Storage – Optional NVMe SSD via PCIe 2.0 (mini PCIe or optional M.2 slot) Video Output – Optional HDMI port Connectivity Optional Gigabit Ethernet port Optional Wi-Fi (IEEE 802.11 b/g/n/ac) & Bluetooth 5.0 Optional 5G, […]

January 9, 2013January 9, 2013

Qualcomm CES 2013 Keynote Was (Mostly) a Waste of Time

Don’t get me wrong Qualcomm makes awesome processors, but as a blogger I already had a fairly negative opinion of Qualcomm when it comes to press releases about their new processors since they usually do not release any details. Yet I was naively thinking I could learn about Qualcomm upcoming products at their keynote, and I was (mostly) completely wrong. If you haven’t watched it yet and want to enjoy a 1h30 show, go watch the on-demand video, where you’ll see current Windows RT products based on Qualcomm, upcoming movies (Pacific Rim and Star Trek), Big Bird, Nascar and Maroon 5. However, if you want to learn about Qualcomm and be fed with geeky stuffs, don’t waste your time. I’ve still been able to extra a little bit of useful information, and got some more info from other sites, and amazingly Qualcomm’s own press releases. Unless you’re high after smoking […]