Posted on

Pebble Time Round is Thinner, Features a Circular Display, But Lasts Only 2 Days on a Charge

Pebble introduced Pebble Time smartwatch with an always-on color e-Paper display, voice recognition, and 7 days of battery life early this year, and the company has now unveiled a thinner version with a circular display, that’s still always-on, but unfortunately only lasts 2 days on a charge like most of other smartwatches on the market. The Pebble Time Round shares the same “Timeline” user interface as the Pebble Time (Steel), and most of the hardware features: Display – Always-on, color e-paper display with LED backlight, 2.5D gorilla glass display Connectivity – Bluetooth Audio – Built-in microphone for voice reply Battery / Power Up to 2 days of battery life A 15 minutes charge gives you a day of use. Magnetic charging with cable working in any USB port Misc – 3x tactile buttons, vibrating motor for discreet alerts and alarms IP Rating – Splash resistant to IPX7 standard (Not waterproof […]

LILYGO T-Circle-S3
Posted on

LILYGO T-Circle-S3 – An ESP32-S3 devkit with 0.75-inch circular touch display, microphone and speaker

The LILYGO T-Circle-S3 is a circular touch display development board built around the ESP32-S3 MCU and designed for smart gadgets, IoT devices, and wearable applications. The board integrates Wi-Fi 4, Bluetooth 5.0, a MEMS microphone, a 3W Class-D audio amplifier with speaker support, an RGB LED, six rear GPIO pins, a Qwiic interface, and USB-C for charging. The board is very similar to the Waveshare RP2350-LCD-1.28, with its round display design, but it does not support wireless connectivity and audio. It also resembles SB Components’ Dual Roundy (ESP32-S3),  but compared to that, the T-Circle-S3 is smaller and features a touch display, a microphone, a speaker amplifier, and an RGB LED. LILYGO T-Circle-S3 specifications: Wireless SoC – ESP32-S3R8 CPU – Dual-core Tensilica LX7 @ up to 240 MHz with vector instruction Memory – 512KB SRAM, 8MB PSRAM Storage – 384KB ROM Wireless – 2.4 GHz WiFi 4 and Bluetooth LE Storage […]

Advertisement
Waveshare ESP32-S3 LCD Driver Board
Posted on

ESP32-S3 LCD Driver Board supports both circular and square displays

Waveshare ESP32-S3 LCD Driver Board is a compact development board designed to simplify the GUI development process. The company mentions that the board supports 2.1-inch, 2.8-inch, and 4-inch displays and with an additional SPI and I2C header it can support a wide range of LCD panels. Additionally, the board features an onboard lithium battery charger and 15 usable GPIO pins for added flexibility. These features make this device suitable for applications like smart home devices, industrial control panels, and interactive kiosks. It seems like the board supports the 4-inch LF40 square touchscreen display that we wrote about just yesterday. other than that it also supports 2.1-inch and 2.8-inch circular displays. Seeking off circular displays, we have previously written about some ESP32-powered development boards with circular displays like the Waveshare 1.69-inch IPS touch LCD, the Waveshare RP2040-LCD-0.99-B, the Waveshare ESP32-S3-LCD-1.28 and many other types of displays. Feel free to check those […]

RP2350 Rounded LCD
Posted on

1.28-inch round color display features Raspberry Pi RP2350, motion sensor, GPIO headers, metal case

Waveshare has recently launched the RP2350-LCD-1.28, a Raspberry Pi RP2350-based 1.28-inch round color display module with 240×240 pixel resolution and a 65K-color IPS panel. This board also features a rechargeable Lithium battery manager, a 6-axis IMU with a 3-axis gyroscope and accelerometer, multiple GPIO pins, and a USB Type-C connector for programming and power. Additionally, it supports USB 1.1 host/device support, temperature sensor, and 24 PWM channels, all configured for flexible I/O options. These features make this device useful for IoT, wearable tech, and embedded applications. The company also provides an optional CNC metal casing that provides durability and heat dissipation for portable or rugged applications. We have previously covered similar development boards with a round display such as the RP2040-powered 0.99″ rounded display, the ESP32-S3 LCD Driver Board, the SB-Components has launched Dual Roundy, and others, but it’s the first to feature the RP2350 microcontroller. RP2350-LCD-1.28 specification: Microcontroller – Raspberry Pi […]

ESP32-C6-LCD-1.47
Posted on

ESP32-C6 WiFi 6 and Bluetooth 5.0 USB-C development board integrates 1.47-inch TFT LCD Display

Waveshare has introduced the ESP32-C6-LCD-1.47 development board powered by an ESP32-C6 RISC-V microcontroller with WiFi 6 and Bluetooth 5 connectivity and equipped with a 1.47-inch display with a 172×320 resolution. With a 4MB flash, an RGB LED, and a microSD card slot for extra storage, this board is suitable for projects that need a compact display, low power consumption, and wireless connectivity such as AIoT applications and human-machine interfaces (HMI). Earlier this month, we covered the ESP32-S3 USB dongle, another development board from Waveshare designed for HMI applications with the same 1.47-inch display with a 172×320 resolution, but a USB Type-A port instead of the USB-C port found in the model covered today. In the past, we’ve written about other ESP32-based development boards for HMI applications, including the LILYGO T-HMI, ESP32-S3-Touch-LCD-4.3B, and Waveshare’s ESP32-S3 LCD Driver Board supporting both square and round displays. Feel free to check them out if […]

ESP32 S3 HMI development board
Posted on

ESP32-S3 USB dongle integrates 1.47-inch TFT LCD display

Waveshare ESP32-S3-LCD-1.47 is an ESP32-S3 USB dongle with Wi-Fi, Bluetooth, high-capacity Flash and PSRAM, and a 1.47-inch LCD. Additionally, it has an onboard microSD card slot used for storage and some RGB LEDs for visual feedback. All these features make this tiny device suitable for applications like interactive displays, IoT devices, hardware pentesting, and more. Previously we have written about the LILYGO T-HMI a similar ESP32-S3-based development board built for HMI applications, as well as the ESP32-S3-Touch-LCD-4.3B and Waveshare ESP32-S3 LCD Driver Board, but it must be the first time we’ve come across a USB dongle-like ESP32-S3 board with an integrated display. ESP32-S3-LCD-1.47 specifications: Wireless MCU – Espressif Systems ESP32-S3R8 CPU – Dual-core Tensilica LX7 @ up to 240 MHz with vector instructions for AI acceleration. Memory – 512KB RAM, 8MB PSRAM Storage – 384KB ROM Connectivity – 2.4 GHz WiFi 4 and Bluetooth 5.0 LE with support for long-range, up […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
How to fix Lichee Console 4A display
Posted on

How I “fixed” the display on Lichee Console 4A terminal

When I wrote a hands-on post about Lichee Console 4A RISC-V development terminal I noted the display would sometimes have strange effects or simply go black. I’ve now fixed the issue, and I was just probably unlucky since the issue must be rare, but I’ll still document it in case somebody encounters a similar problem and for fun! First, the video below shows what I would see on my terminal after using it for a few minutes. Since then, the display has gone completely dark, and all I see is the backlight, but I can still access the device through an SSH terminal. It looks like a bad connection issue, but I still contacted Sipeed and they told me it must have been the display connector. So I turned off the device and reopened the enclosure to remove and reinsert the cable for the display as shown in the photo […]

Arduino MKR IoT Carrier board
Posted on

Arduino MKR IoT Carrier embeds display, sensors, and I/Os for IoT projects

Arduino Oplà IoT Kit was launched last fall as the first open programmable IoT platform from the company. The kit included everything you need to create your own IoT devices with MKR IoT carrier with a 1.3-inch OLED color display,  environmental sensors, capacitive touch buttons, Arduino MKR WiFi 1010 board, external PIR motion and moisture sensors, a circular plastic enclosure, and various cables. But the community soon wanted to only buy the carrier board without having to purchase the whole kit, so Arduino has just started to sell MKR IoT Carrier board as a standalone product. Arduino MKR IoT Carrier features & specifications: Compatible with Arduino MKR family boards with WiFi, LoRa, NB-IoT, or 3G cellular connectivity Storage – MicroSD card holder Display – Round 1.3-inch OLED display I/Os 2x 24V relays 3x Grove connectors include two analog and one digital (I2C) Sensors  – Temperature, humidity, pressure, RGBC light, gesture […]

Boardcon MINI1126B-P AI vision system-on-module wit Rockchip RV1126B-P SoC