ZOTAC ZBOX PI320 is a Pocket-Sized Intel Bay Trail-T Mini PC

If you’re a fan of HDMI TV sticks, but wished it could use an Intel processor, instead of the various ARM processors currently available, your dream may have come true thanks to ZOTAC ZBOC PI320 mini PC. Although it’s not quite as small as your standard HDMI TV stick, it’s small enough (115.5mm x 66mm x 19.2mm) to fit into your pocket, and it’s also much more powerful, as it features Intel Atom Z3735F quad-core Bay Trail-T processor, 2GB RAM, 32GB flash, wired and wireless connectivity and more. ZBOX PI320 pico-series mini PC specifications: SoC – Intel Atom Z3735F “Bay Trail” quad core processor @ 1.33 GHz (Burst freq up to 1.83 GHz) and Intel HD Graphics System Memory – 2GB DDR3L @ 1333 MHz (soldered) Storage – 32GB eMMC flash (soldered) + “3-in-1” card reader  (micro SD/SDHC/SDXC) Connectivity – 10/100M Ethernet, Wi-Fi 802.11n + Bluetooth 4.0 (AP6383) Video Output […]

ESP8266 WiFi Serial Module Costs Just $5

Wi-Fi is great because it’s ubiquitous, and rather fast for a wireless standard. However, it drains batteries fast, and Wi-Fi modules are usually much more expensive than Bluetooth modules for instance. There’s not much that can be done with regards to power consumption, but thanks to ESP8266 module, it’s now feasible to add Wi-Fi to your Arduino board, or others, for just $5 including shipping on Aliexpress, but SeeedStudio also have it for $6.95. If you buy 1,000 pieces, it goes down to about $3 per unit. As reported by Hackaday, this module embeds ESP8266 SoC which takes care off all IP stacks, a bit like Texas Instruments CC3000 SoC, but it’s just much cheaper. Here are some of the specifications of the module (and processor): SoC – Espressif Systems ESP8266 32-bit RISC processor with 802.11 b/g/n support(32-pin QFN package), Interfaces: SDIO 2.0, SPI, UART, I2S Wi-Fi – 802.112 b/g/n […]

MIPS Creator CI20 Development Board Formally Announced, Free to Selected Developers

Earlier this month, I discovered MIPS Creator CI20 development board based on Ingenic JZ4780 dual core MIPS processor thanks to one of my reader.  Imagination Technologies has now launched the board, which will run Debian 7 first, soon support Android 4.4 and others Linux distributions, and the company places their MIPS board as a competitor to the popular ARM based boards such as the Raspberry Pi and BeagleBone Black. This is the first board part of Prpl initiative for open source Linux and Android software for the MIPS architecture. As a reminder, I’ll list the hardware specifications again: SoC – Ingenic JZ4780 dual core MIPS32 processor @ 1.2 GHz with Imagination PowerVR SGX540 GPU. 32kI + 32kD per core, 512K shared L2. System Memory – 1GB DDR3 Storage – 8GB NOR flash, 1x SD card slot, 1x SD card slot via expansion Video Output – HDMI up to 1080p Audio […]

Samsung Exynos 7 ARM Cortex A57 Processor Linux Code Submitted

Samsung has not announced any 64-bit processor yet, but according to a recent patchset Exynos 7 may be their first 64-bit ARM SoC, and it will be based on the faster Cortex A57 cores. A quick way to learn a little more is to check the device tree file (exynos7.dtsi). Here’s an interesting snippet:

As it stands, Exynos7 would be a single core Cortex A57 processor. This sounds unlikely that a company would launch a single core processor at this stage, so it’s probably early code that may not support all cores just yet.  We also know Samsung uses ESPRESSO board for development with Samsung Exynos 7 processor and 3 GB RAM. Thanks to David for the tips. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time […]

Review of UyeSee G1H Rockchip RK3288 Android TV Box

UyeSee G1H is one of the first Android TV boxes powered by Rockchip RK3288 quad core Cortex A17 SoC. I’ve already listed specs, and shown a few pictures of the device and the board in my “UyeSee G1H Unboxing” post, so today I’ll write a full review, checking out the user interface, testing video playback capabilities, network and storage performance, play a few games, check hardware features are working as expected, and runs some benchmarks on the platform. First Boot, Settings and First Impressions There’s an infrared remote control with the device. I’ve inserted a CR2032 battery, and although it works great in the user interface, it becomes useless with Android apps, so instead I’ve opted to use Mele F10 Deluxe air mouse which brings mouse and keyboard support. Before powering up the device, I’ve connected an HDMI cable, the RF dongle for Mele F10 Deluxe, a USB hard drive, […]

AllWinner A80 Linux SDK Released

After Android 4.4 SDK for AllWinner A31 last week, another AllWinner software development kit has been seen in the wild, this time for the new AllWinner A80 octa-core processor. A80 SDK includes source code for the Linux Kernel and U-boot, as well as buildroot, and various AllWinner tools. I’ve also noticed AllWinner A80 datasheet is available, but with the strict minimum information (45 pages). Let’s get the code, and extract it:

Now we need to configure the build:

sun9i is the codename for AllWinner A80, not sure what w1p1 means. Dragonboard must be the internal Allwinner development board, but I just selected Linux, since the SDK does not come with Android, and finally I opted for optimus, which could stand for OptimusBoard. You may need to install extra dependencies in your build machine, for example (in Ubuntu 14.04):

Now let’s start buildroot which should retrieve the toolchain, […]

$33 Intex Cloud Fx Firefox OS Smartphone Coming to India

Mozilla promised $25 smartphones running Firefox OS based on a Spreadtrum Cortex A5 application processor earlier this year, mostly for emerging markets. Thanks to Intex Cloud Fx smartphone selling for 1,999 Rs ($33) in India, we’re almost there. Intex Cloud Fx specifications: SoC – Spreadtrum SC6821 @ 1.0 GHz System Memory – 128MB RAM Storage – 256MB, expandable up to 4GB via external memory. Display – 3.5” HVGA (480 x 320) touchscreen display Cellular Network – GSM:900/1800MHz. GPRS/EDGE. Dual SIM support. Connectivity – WiFi, Bluetooth, and FM radio Audio – Loudspeaker, 3.5mm headphone jack. Camera – 2MP rear camera USB – Yes (micro SD port?) Battery – 1250mAh lithium-ion battery (4 hours of talk time, 200 hours standby) Dimensions – 115.9 x 62 x 11.8mm Weight – 104 grams The phone is said to come pre-loaded with Facebook and Twitter apps, some games, Whatsapp is supported via third party app/service, and […]

UyeSee SoundMate M2 Wi-Fi Audio Streamer Review

UyeSee SoundMate M2 Wi-Fi music streaming receiver allows you to wirelessly play audio files from your smartphone or computer to speakers connected to a 3.5mm jack or an audio receiver connected to the optical S/PDIF output of the device. The company sent me a sample for review. I’ll first list the key features of the system, show pictures of the device, and test it with an Android smartphone using my TV speakers. SoundMate M2 Features & Specifications Listed hardware specifications and features: Processor – Unnamed router chipset and Audio DAC Memory & Storage – N/A Connectivity – 802.11 b/g/n WiFi up to 150Mbps with antenna. Open (default), WPA, WPA2, WPA2 Mixed Security. Audio Output – 3.5mm audio jack, optical S/PDIF Streaming Standards – AirPlay, DLNA, and QPlay Audio Formats – aac, mp3, wav, flac, and ape USB – 1x USB 2.0 port for mass storage and/or 3G dongle, 1x micro […]

EDATEC Raspberry Pi 5 fanless case