Hardware Category - Page 795 of 1062 - CNX Software

December 12, 2015December 13, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

FTDI NerO is an Energy Efficient Arduino UNO Compatible Board That Can Handle Higher Loads (Crowdfunding)

FTDI found out that the original Arduino UNO R3 boards had issues handling higher loads with 9V and 12V power input being limited to about 800mA and 300mA respectively before the voltage of the 5V regulator drops, so they decided to make their own supporting up to 1A. NerO board specifications: MCU – Atmel ATMega328 MCU @ 16MHz with Optiboot bootloader I/Os 14 Digital I/O Pins including 6 PWM outputs 6 Analog Inputs USB – micro USB port for programming using FTDI FT231XS USB UART interface (4) Misc – Status and PWR LEDs, on/off switch Power Supply – 7V to 20V ( 9V or 12V recommended ) via power barrel or VIN pin. 5V switching regulator. Dimensions – UNO R3 form factor FCC/CE certified The board is manufactured in Europe by MikroElektronika, a company which I started the hear about more and more, especially since they’ve launched their mikroBUS standard […]

December 11, 2015December 12, 2015 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

ODROID-C0 Board is an Upcoming Alternative to Raspberry Pi Zero

When Raspberry Pi Zero launched at the end of November, it looked somewhat familiar to Hardkernel ODROID-W board that eventually had to be phased out as Broadcom would not sell Broadcom BCM2835 to the Korean company. In an interesting turn of events, Hardkernel has now shown the first prototype of ODROID-C0 (ODROID-C Zero), a tiny board based on Amlogic S805 found in ODROID-C1+. The name of the board may seem to be derived from Raspberry Pi Zero, but it’s not quite the case as Hardkernel first revealed their plans for ODROID-C0 back in November, a week before R-Pi Zero board was unveiled. ODROID-C0 will have similar specifications to ODROID-C1+ minus Ethernet, and the USB ports in order to reduce the PCB size: SoC – Amlogic S805 quad core Cortex-A5 processor with a Mali-450MP2 GPU System Memory – 1GB DDR3 Storage – eMMC module socket, and micro SD slot Video & […]

December 11, 2015December 17, 2015 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Rikomagic MK36SLE (Linux Edition) Based on Intel Atom x5-Z8300 Processor Runs Ubuntu 15.04

When people think about Linux on Intel platform, they often believe it’s just as easy as flashing an Ubuntu ISO on a USB stick and install it on their computer. While that’s true for desktop or laptop processors, the low power Intel Atom processors for tablets such as Bay Trail-T or Cherry Trail are not well supported in Linux with various issues ranging from an incompatible UEFI binary to a complete lack of audio support. So far, most companies have not provided a decent version of Atom Z3735F or Atom x5-Z8x00 mini PCs with Linux, and all the work has been done by the community such as this Ubuntu 14.04 image for Atom Z3735F. But Rikomagic must have worked on a Cherry Trail Linux port, more exactly Ubuntu 15.04, for their MK36S Cherry Trail mini PC, and has now launched MK36SLE (Linux Edition). [Update: While most features are currently workings, […]

December 10, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

GoWarrior Tiger Development Board with ALi M3733 SoC To Support Android, Debian and FreeRTOS

There was a time when development boards were really hard to get for individuals with companies not wanting to waste their time with hobbyists, but the maker revolution changed all that, and now many companies want to get involved in “open source” board for the developer’s community. The latest board trying to emulate the Raspberry Pi is GoWarrior Tiger powered by ALi M3733 dual core cortex A9 processor with 1GB RAM, 4GB Flash, Ethernet and WiFi, HDMI and AV output, and two 40-pin expansion headers. Tiger board specifications: SoC – ALi M3733-AFAAA dual Cortex A9 processor @ 1.0 GHz with ARM Mali-400 MP2 GPU System Memory – 1GB DDR3; dual channel 1600 MT/s, 800MHz Storage – 4GB on-board NAND Flash + micro SD slot Video & Audio Output – HDMI 1.4 port up to 1080p, with support for HDCP and CEC, 3.5 mm AV jack Connectivity – 10/100M Ethernet, 802.11 […]

December 10, 2015December 10, 2015 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

MINIX NEO U1 Android Media Hub and NEO A2 Lite Air Mouse Unboxing and Teardown

MINIX NEO U1 Android TV box, which the company prefers to call “media hub for Android”, has been announced last week, and has started shipping. The company sent me one sample of the Amlogic S905 device, as well as MINIX NEO A2 Lite air mouse which can be included with the box as part as some bundle. I’ll check out the media hub and air mouse today, as well as get a close look at the internals, before testing the device, and published a full review of MINIX NEO U1 lateron. MINIX NEO U1 Unboxing MINIX sent me the packages via Fedex and I received it within 2 or 3 days. The devices comes with a simple infrared remote control, a micro USB to USB cable, a USB OTG adapter, an HDMI cable, a WiFi antenna, a 5V/3A power supply, a setup guide in English, German, Chinese and Russian, and […]

December 10, 2015December 10, 2015 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

RemoteBoot is an ESP8266 based Board to Power on or Reboot Your Computer over WiFi (Crowdfunding)

Wake-on-LAN is a features that allows you to remotely start your computer by sending magic network packets to the LAN interface, but it requires support from your motherboard. So Ben Wang, an Australian high-school student, decided to make his own little board called RemoteBoot to power off and reboot computers that do not support the feature, or even access the serial console on embedded boards. The board is pretty basic and includes an ESP8266 module: ESP12-E WiFi module 2x digital switching outputs for power and reset buttons 2x digital protected inputs for power and activity LEDs 3x extra general purpose inputs/outputs broken out Tx/Rx for serial console There’s also a feature disabled by default, where a watchdog monitor the activity LED, and automatically reboots the computer after a user-defined timeout. Everything will be control via a simple web interface, and if you have multiple RemoteBoot devices, access to Remoteboot Cloud […]

December 9, 2015December 13, 2015 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

PINE A64 Development Board Kickstarter Campaign is Up

As previously announced, PINE64 $15 64-bit ARM Linux computer was due to launch on December 9, and the Kickstarter campaign is now up, and the shipping costs are $7 to the US, and $12 to the rest of the world. The name have changed to PINE A64 and PINE A64+ since the first announcement, but the specifications have mostly not changed for th two boards with an Allwinner quad core Cortex A53 processor, 512MB to 1GB RAM, a micro SD slot for storage, Gigabit Ethernet, HDMI 1.4, USB ports, and some other expansion headers for I/Os, displays or cameras. The PINE A64+ however now has an option for 2GB for $29, and we’ve got a bit more information about optional modules and accessories: Wireless module with WiFi and Bluetooth adapter Zwave adapter 7″ LCD touchpanel (PINE64+ only) Dry contact I/O board 5MP MIPI CSI camera Various sensors Various remote controls […]

December 8, 2015January 30, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

MXQ S905 / G9C 4K Android Media Player Unboxing and Teardown

Beside Tronsmart Vega S95 Telos, I’ve received another Amlogic S905 device with MXQ G9C, which was the first Amlogic S905 TV box to have surfaces in the news back in June, and a sample has been sent to me by Shenzhen Tomato. Since the company provides ODM/OEM services instead of catering to end users, the specs are flexible, but the device I received is with the default configuration namely 1GB RAM and 8GB flash, and with similar specs to Beelink MINI MX or KI Plus for example. Today, I’ll start by checking out the hardware, before reviewing the full package a little later. MXQ S905 / G9C TV Box Unboxing I received the parcel via DHL, with the device in a retail white brand package reading “MXQ”, “S905”, and “IPTV box”, with some features on the back such as Airplay, DLNA, Miracast, or Widewine, Playready, and Verimatrix. But I’m pretty […]