Debian Category - Page 2 of 102 - CNX Software

March 28, 2024March 28, 2024 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

BeagleY-AI SBC features TI AM67A vision processor with 4 TOPS AI accelerators

Texas Instruments AM67A single board computer

The BeagleBoard.org Foundation’s BeagleY-AI is an open-source hardware, credit card-sized SBC powered by a Texas Instruments AM67A quad-core Cortex-A53 vision processor with various programmable blocks capable of delivering up to 4 TOPS for AI algorithms. The board ships with 4GB RAM, relies on a microSD card slot for storage and OS booting, implements gigabit Ethernet, WiFi 6, and Bluetooth 5.4 connectivity, and can drive up to three displays via micro HDMI, OLDI (LVDS), and MIPI DSI interfaces. The BeagleY-AI also comes with two MIPI CSI camera interfaces, four USB 3.0 ports, a USB Type-C port, and a 40-pin GPIO header for expansion. We can also see a 16-pin PCIe FPC connector that looks somewhat similar to the 20-pin PCIe connector on the Raspberry Pi 5 but officially supports PCIe Gen3 x1. BeagleY-AI specifications: SoC – Texas Instruments AM67A (J722S) “vision processor” CPU Quad-core 64-bit Arm Cortex-A53 processor at 1.4GHz Arm […]

March 21, 2024March 21, 2024 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Radxa Penta SATA HAT adds up to five SATA drives to the Raspberry Pi 5 for NAS applications

The Radxa Penta SATA HAT leverages the PCIe interface on Raspberry Pi 5 SBC to add up to five 2.5-inch or 3.5-inch SATA drives through four SATA connectors and an eSATA connector and enables NAS designs with the latest SBC from Raspberry Pi Limited. The Radxa’s Penta SATA HAT was initially launched in 2019 as an accessory for the Rock Pi 4 SBC powered by a Rockchip RK3399 processor and an M.2 PCIe socket since Raspberry Pi competitors have been exposing PCIe interfaces for years. It turns out the exact same Penta SATA HAT design can be reused with the Raspberry Pi 5 by providing a new PCIe FPC cable and updating the configuration scripts. Radxa Penta SATA HAT for Raspberry Pi 5 specifications: 4x SATA interfaces + 1x eSATAp for up 100TB storage via 5x 2.5″ or 3.5″ HDD/SSD Host Connection – Flat cable with 2-lane PCIe 2.1 via […]

March 20, 2024March 20, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Make a Raspberry Pi 5 Game Boy lookalike with the PiBoy DMGx handheld gaming console kit

Experimental Pi’s PiBoy DMGxis is a kit that converts the Raspberry Pi 5 into a handheld gaming console that looks like a Game Boy with a 3.5-inch color display and all the controls found on the original Game Boy. The company has launched several PiBoy portable game console kits for Raspberry Pi SBCs over the years, so the new PiBoy DMGx for the Raspberry Pi 5 should come as no surprise, and the company says it should be able to run emulators for N64, PSP, Dreamcast, Wii, Gamecube, PS2, and others. PiBoy DMGx kit specifications: Supported SBCs – Raspberry Pi 5; with adapters: Raspberry Pi 3 and 4 Storage – MicroSD card slot (11) Display – 3.5-inch display with 640 x 480 resolution (3) Video Output – Micro HDMI port from RPi 5 Audio – Speaker (5), 3.5mm audio jack (7) User inputs – D-Pad (10), analog stick (9), […]

March 18, 2024April 8, 2024 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Remi Pi is a compact, low-cost SBC powered by a Renesas RZ/G2L Cortex-A55/M33 SoC

MYiR Tech Remi Pi is a low-cost SBC based on the company’s MYC-YG2LX CPU module featuring a Renesas RZ/G2L Arm Cortex-A55/M33 processor, 1GB RAM, 8GB eMMC flash, and plenty of ports and interfaces. Those include two gigabit Ethernet ports, a wireless module with dual-band WiFi 4 and Bluetooth 4.2 connectivity, HDMI and LVDS display interfaces, MIPI CSI camera input, a 3.5mm audio jack, a few USB ports, and a 40-pin GPIO header compatible with the one on the popular Raspberry Pi SBCs. Remi Pi specifications: System-on-Module – MYiR MYC-YG2L23 module with SoC – Renesas RZ/G2L processor (R9A07G044L23GBG) CPU 1.2 GHz dual-core Arm Cortex-A55 processor 200 MHz Arm Cortex-M33 real-time core GPU – Arm Mali-G31 3D GPU VPU – H.264 decoding/encoding System Memory – 1GB DDR4 Storage – 8GB eMMC flash, 32KB EEPROM PMIC – Renesas RAA215300 power management IC Storage – MicroSD card slot Display interfaces HDMI video output LVDS […]

March 18, 2024March 17, 2024 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Some Raspberry Pi 5 boards can be overclocked up to 3.14 GHz (and run just fine)

The Raspberry Pi 5 is advertised as a single board computer with a CPU clocked up to 2.4 GHz, but some of the boards can run stably at a higher frequency, and Jeff Geerling found out one of his boards could be overclocked up to 3.14 GHz with no issues when running a stress test. The Raspberry Pi 5 already delivers a two to three-times jump in performance against the previous generation Raspberry Pi 4 SBC when clocked at 2.4 GHz, but some already overclocked their up to 3.0 GHz, and many thought it was the maximum limit. But a recent firmware release proved them wrong, as it turns out some Raspberry Pi 5 boards can boot at 3.2 GHz and run stably at 3.14 GHz with an adequate cooling solution. The voltage was also adjusted in the config.txt to more or less safe settings. Contrary to the photo above, […]

March 18, 2024March 17, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Sipeed MaixBox M4N AI Box with 43.2 TOPS AXera AX650N SoC can decode/encode up to 32 videos

Sipeed MaixBox M4N is an AI box for video analytics and computer vision equipped with an AXera-Pi Pro (AX650N) octa-core Cortex-A55 SoC with a 43.2 TOPS (INT4) or 10.8 TOPS (INT8) AI accelerator and an H.265/H2.64 video encoder/decoder supporting up to 32 1080p30 videos. The AI box is based on the Sipeed Maix-IV motherboard, an upgrade to the Maix-III devkit with an AX620A quad-core Cortex-A7 SoC with a 14.4 TOPS AI accelerator (INT4). It comes with 8GB RAM shared for Linux and the AI accelerator, 32GB eMMC flash and an M.2 SATA socket for storage, two HDMI outputs, two gigabit Ethernet ports, optional WiFi or 4G LTE mini PCIe module, a few USB ports, and RS232 and RS485 interfaces. Sipeed MaixBox M4N specifications: SoC – AXera AX650N CPU – Octa-core Arm Cortex-A55 @ 1.7 GHz with NEON support NPU – 43.2 TOPS @ INT4, 10.8 TOPS @ INT8 with support […]

March 17, 2024March 17, 2024 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

7-inch Raspberry Pi CM4-based industrial HMI offers gigabit Ethernet, RS485 Modbus, digital and analog inputs

NORVI RPI-HMI is an industrial controller with a 7-inch touchscreen screen display powered by a Raspberry Pi CM4 and equipped with a range of interfaces including a gigabit Ethernet RJ45 port, a few USB ports, and several terminal blocks for RS485 (Modbus), digital and analog input, transistor outputs, and 24V DC power input. The new Raspberry Pi CM4-based HMI announcement follows the NORVI ESP32-HMI controller that was launched last December with an ESP32-S3 wireless microcontroller and a 5-inch LCD display with resistive touch. The NORVI RPI-HMI builds on that with a much faster Arm processor, a larger display with a capacitive touchscreen, gigabit Ethernet, and a wider range of I/Os that makes it suitable for various industrial HMI and PLC applications. NORVI RPI-HMI Industrial Controller specifications: SoM – Raspberry Pi CM4 SoC – Broadcom BCM2711 quad-core Cortex-A72 processor with VideoCore GPU System Memory – 1GB, 2GB, 4GB or 8GB LPDDR4-3200 […]

March 16, 2024March 16, 2024 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Firefly Core-3562JQ Rockchip RK3562J industrial SoM works in the -40 to +85°C temperature range

Firefly Core-3562JQ is a system-on-module based on Rockchip RK3562J SoC – the industrial-grade version of the Rockchip RK3562 quad-core Cortex-A53 Tablet SoC – designed to operate in the -40 to 85°C industrial temperature range and suitable for digital signage, industrial control systems, industrial PLCs, energy data concentrators, smart healthcare, self-service terminals, and more. The CPU module features up to 8GB RAM, 64GB flash, and a Rockchip RK809-5A PMIC, plus three 80-pin board-to-board connectors exposing video output and input interfaces, audio (SPDIF, PDM, I2S) interfaces, networking (GbE and Fast Ethernet), various USB interface, a 1-lane PCIe 2.1 interface, and more. Firefly Core-3562JQ specifications: SoC – Rockchip RK3562J CPU – Quad-core Arm Cortex-A53 processor @ up to 1.2 GHz (against 2.0 GHz for the Rockchip RK3562) GPU – Arm Mali-G52 EE with support for OpenGL ES 3.2, Vulkan 1.1, OpenCL 2.0 AI accelerator – None listed in the specs (Rockchip RK3562 comes […]