AMLogic Category - Page 65 of 93 - CNX Software

December 6, 2015December 6, 2015 by Jean-Luc Aufranc (CNXSoft) - 118 Comments

How to Run Headless Linux on Amlogic S905 Devices Such as MINI MX or K1 Plus

A few week ago, I had been informed that Amlogic S905 U-boot and Linux source code was released, and one person use the code and other resources to load a minimal Ubuntu 14.04 image to his K1 Plus TV box and released the installation instructions and the image (Thanks olin!). I also have K1 Plus here, but since I’ve just finished reviewing Beelink MINI MX, I decided to use the latter instead. The instructions below boot Linux from the (micro) SD card, and can still boot Android if you remove the SD card. Modifying U-boot environment The instructions include opening the box, and connecting or soldering a USB to TTL debug board to access U-boot and change some parameters. But later once an image with network is working, you could also build and load fw_setenv and fw_saveenv, and do the same steps with an Android shell and without the need […]

December 4, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Zidoo X5 is Yet Another Amlogic S905 Android Media Player

Zidoo has also joined the fray of companies releasing Amlogic S905 based TV boxes, and they’ve decided to go low end with 1GB RAM, 8 GB internal storage, Fast Ethernet, and 2.4 GHz WiFi. Zidoo X5 specifications: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU System Memory – 1GB DDR3 Storage – 8GB eMMC + micro SD slot Video Output – HDMI 2.0 up to 4K @ 60Hz with CEC support, and 3.5 mm AV jack Audio – HDMI, AV, optical S/PDIF Connectivity – Fast Ethernet, 802.11 b/g/n Wi-Fi, and Bluetooth 4.0 USB – 2x USB 2.0 host ports Misc – IR receiver Power Supply – 5V/2A Dimensions & Weight – N/A (plastic case) The device runs Android 5.1. Based on my last two reviews about their products, Zidoo has an history of releasing products a little too early, not unlike most […]

December 4, 2015March 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 289 Comments

Review of Beelink MINI MX TV Box with MX Player

Beelink MINI MX Amlogic S905 Android media player has similar features, and costs about the same as K1 Plus TV box I reviewed last week, so it would be interesting to compare both. While specifications are similar there are some differences. For example, MINI MX lacks AV output, and only features two USB ports against four for K1 Plus, but it supports Gigabit Ethernet which could be an advantage while playing high bitrate 4K videos, as well a Bluetooth 4.0. I’ve already provided pictures and torn down MINI MX, so today is time for the full review and a comparison with K1 plus. First Boot, Settings and First Impressions I connected my USB 3.0 hard drive to one of the USB port, and a USB hub to tghe other port with a USB webcam, a USB keyboard, and two RF dongles for a gamepad and an air mouse. I also […]

December 2, 2015May 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Xiaomi Mi 3 TV Box Board’s Pictures Reveal Amlogic S905-H Processor

Xiaomi unveiled Mi 3 TV box based on Amlogic S905 processor a while ago, but since we’ve got so many Amlogic S905 boxes on the market, and the interface is only in Chinese, I did not find it that interesting. But somebody did a teardown of the device, and sent me some good pictures revealing that the device uses Amlogic S905-H with DTS and Dolby licenses paid for and enabled. So that means just like for Amlogic S812, where there’s a S812-H with Dolby and DTS, there are two versions for Amlogic S905. I understand the silicon might be the same, but the SDK will differ (TBC). Other main components include a 4GB Toshiba THGBMBG5D1KBAIT eMMC 5.0 flash, two NANYA NT5CB256M16DP-EK 512MB DDR3 chips (1GB in total), a Broadcom wireless chipset (BCM4345) for 802.11ac Wifi and Bluetooth 4.1, and Ricoh RN5T567A PMIC. There are few connectors as on other Xiaomi […]

December 1, 2015December 1, 2015 by Jean-Luc Aufranc (CNXSoft) - 50 Comments

Tronsmart Vega S95 4K Android TV Box Features an External SATA Port

Tronsmart is adding three new devices to the long list of Amlogic S905 TV boxes on the market with: Vega S95 Pro – 1GB RAM, 8GB flash, AP6212 wireless module (2.4GHz WiFi + Bluetooth 4.0) Vega S95 Meta – 2GB RAM, 8GB flash, AP6330 wireless module (Dual band WiFi + Bluetooth 4.0) Vega S95 Telos – 2GB RAM, 16GB flash, AP6335 wireless module (802.11 b/g/n/ac WiFi + Bluetooth 4.0), and SATA All three models also include Gigabit Ethernet. The Pro and Meta models have a lot of competition, but Telos is quite unique so far, as it’s the first to include a SATA port. Tronsmart Vega S95 Telos specifications: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 2GB DDR3 Storage – 16GB eMMC 5.0 flash by Samsung + SATA connector + SD card slot Video HDMI […]

November 28, 2015November 28, 2015 by Jean-Luc Aufranc (CNXSoft) - 68 Comments

K1 Plus Amlogic S905 TV Box Review

Videostrong KI Plus is one of the first Amlogic S905 TV boxes to be launched on the market, and it also happens to be one of cheapest model selling for around $45 on various sites, and it’s even available for $39.99 on GearBest for Black Friday / Cyber Monday. I’ve posted the specifications and pictures of the device previously, and after updating the firmware, I’ve finally completed the review. First Boot, Settings and First Impressions As usual, I’ve connected a whole bunch of cables and peripherals to the device to make the power supply can handle it, including a USB hard drive, a USB webcam, a USB keyboard, a USB hub with two RF dongles for Tronsmart Mars G01 gamepad and MeLE F10 Deluxe air mouse, as well as a HDMI, optical audio and Ethernet cables, and a speaker connected to the 3.5mm AV jack and powered by one of […]

November 27, 2015November 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

H.264 & H.265 4K Video Playback on Amlogic S905 Android TV Box

I’ve almost completed my review of Videostrong K1 Plus Android box powered by Amlogic S905, and while there are many shortcomings, 4K video playback is actually pretty good with Android’s Video Player (Kodi is not really usable @ 4K). I connected the device to LG 42UB820T 4K UHD TV, and set video output to 2160p @ 60Hz, and went through several video samples: Beauty_3840x2160_120fps_420_8bit_HEVC_MP4.mp4 (H.265 @ 30 fps – No audio) – OK big_buck_bunny_4k_H264_30fps.mp4 (H.264 @ 30 fps – MPEG1/2 and AC3 audio) – OK big_buck_bunny_4k_H264_60fps.mp4 (H.264 @ 60 fps – MPEG1/2 and AC3 audio) – Video looks somewhat OK, but big audio delay or AV sync issue. BT.2020.20140602.ts (H.265 Rec.2020 compliant – AAC audio) – OK (First time I can play this video on any hardware). Fifa_WorldCup2014_Uruguay-Colombia_4K-x265.mp4 (H.265 @ 60 fps – AC3) – Video is very good, but no audio MHD_2013_2160p_ShowReel_R_9000f_24fps_RMN_QP23_10b.mkv (10-bit HEVC @ 24 fps – no […]

November 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

MINIX NEO U1 Android Media Hub Combines Amlogic S905 Processor with 2GB RAM, 802.11ac WiFi

MINIX has posted several graphics on their Facebook page about a new NEO U1 media hub in the last few days. The company will launch the new model which include 2GB RAM, and 802.11ac WiFi next Friday (December 4, 2015) for $129.90 on their Amazon store, and other official resellers. MINIX NEO U1 specifications: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 2GB DDR3 Storage – 16GB eMMC 5.0 flash + micro SD card slot Video Output – HDMI 2.0 up to 4K @ 60 Hz with HDMI CEC support Audio – HDMI, optical S/PDIF, and 3.5mm headphone and microphone jacks Connectivity – Gigabit Ethernet, 802.11 b/g/n/ac Wi-Fi (2×2 MIMO) and Bluetooth 4.1 USB – 3x USB 2.0 host ports, 1x micro USB OTG port Misc – Power button, IR receiver, Kensington lock ready Power Supply – […]