IoTSDR Linux Board Targets the Development of IoT Gateways with Standard or Custom IoT Protocols (Crowdfunding)

iotSDR board

Xilinx Zynq-7010/-7020 powered iotSDR board by EmbedINN enables the development of IoT gateways with support for LoRa, SigFox, WeightLess, Bluetooth, BLE, 802.15.4, ZigBee, as well as custom IoT protocols. The board also supports GPS, Galileo, Beidou, and GLONASS navigation systems thanks to a Maxim Integrated MAX2769 GNSS chip. iotSDR key hardware features and specifications: SoC (one or the other) Xilinx Zynq-Z7010 (XC7Z010-1CLG400C) dual-core Arm Cortex-A9 processor with 256 kb on-chip memory, FPGA fabric with 28,000 logic cells, 17,600 LUTs, 2.1 Mb block RAM, 80 DSP slices Xilinx Zynq-Z7020 (XC7Z020-1CLG400C) dual-core ARM Cortex-A9 processor with 256 kb on-chip memory, FPGA fabric with 85,000 logic cells, 53,200 LUTs, 4.9 Mb block RAM, 220 DSP slices System Memory – 512 MB DDR3 Storage 128 Mbit QSPI flash memory for firmware Microchip AT24MAC602 SPI EEPROM for RF transceiver MCU firmware and data Radios “IoT” Radios RF Transceivers – 2x Microchip/Atmel AT86RF215 European band – […]

Nordic nRF52820 Bluetooth 5.2 SoC Supports Thread, Zigbee and Full Speed USB 2.0

nRF52820 Block Diagram

Nordic Semi has launched the sixth multi-protocol SoC part of their nRF52 family with nRF52820 Bluetooth 5.2 ultra low power System-on-Chip (SoC) supporting  Bluetooth Low Energy (Bluetooth LE), Bluetooth mesh, as well as Thread, Zigbee, and 2.4-GHz proprietary. nRF52820 can handle all Bluetooth 5/5.1/5.2 versions with features such as Long Range, 2 Mbps throughput, direction finding, LE power control, and LE isochronous channels. The SoC also happens to include a Full Speed (12 Mbps) USB 2.0 interface. nRF52820 key features and specifications: MCU Core – Arm Cortex-M4 @ 64 MHz Memory – 32 KB RAM Storage – 256 KB Flash Wireless Connectivity Bluetooth 2 Mbps, 1 Mbps, Long Range Bluetooth Low Energy Bluetooth Direction Finding Bluetooth mesh Thread, Zigbee 802.15.4/ANT/2.4 GHz proprietary Up to +8 dBm TX power Security – 128-bit AES encryption USB – Full Speed USB 2.0 Other Peripherals UART, 2x SPI/TWI, QDEC Analog comparator 4x 32-bit timer/counter, […]

Electrolama to Launch 802.15.4/Zigbee USB Dongle and Raspberry Pi “HAT”

zig-a-zig-ah

Electrolama (@omerk and friends) has been working on two open-source hardware 802.15.4/Zigbee projects with “zig-a-zig-ah” (aka “zzh”) USB stick based on Texas Instruments CC2652R SimpleLink multi-standard wireless MCU and Zoe (Zigbee + Poe) development board based on Raspberry Pi HAT form factor and powered by TI CC2530 SimpleLink 2.4 GHz SoC alongside CC2592 range extender. Both boards are released under an Apache-based Solderpad Hardware License 2.0, and target users of the Zigbee2MQTT project.  The boards could soon also get native support in Home Assistant via the “zigpy-cc” library which adds support in ZHA (Zigbee Home Automation) integration component. Zig-a-zig-ah USB Stick Preliminary specifications: WiSoC – Texas Instruments CC2652R SimpleLink multi-standard wireless MCU with support for Thread, Zigbee, Bluetooth 5 Low Energy, IEEE 802.15.4g, 6LoWPAN, and proprietary systems. (Note: CC2652RB is also considered as it does not require an external crystal oscillator) Host Interface – USB via CH340 USB-UART bridge Misc […]

Gateworks GW16122 IoT mPCIe Card Comes with Long Range Sub-GHz and 2.4GHz Radios

Gateworks GW16122 Dual-Band IoT mPCIe Card

Gateworks GW16122 is a mini PCIe card that adds sub-GHz and 2.4GHz radio to the company line of Ventana and Newport Linux SBC’s, and is meant for industrial IoT (IIoT) applications as an alternative to LoRa and Sigfox. The second generation of the card is based on Texas instruments CC1352P dual-band wireless SoC that supports Wireless M-Bus, IEEE 802.15.4g, 6LoWPAN, KNX RF, and Wi-SUN at sub-GHz frequencies (EU: 868MHz, US: 915MHz), and Bluetooth 5 Low Energy, Thread, and Zigbee at 2.4 GHz. Gateworks GW16122 key features and specifications: MCU – Texas Instruments  CC1352P Arm Cortex-M4F MCU @ 48 MHz with 352KB flash, 80KB SRAM, dual-band wireless radio transmitter/receiver Radios Sub-1 GHz Radio 868MHz EU, 915 MHz US (default) Low Power, sensor nodes can run on a coin-cell battery -121dBm Receive Sensitivity for long-range communication 20dBm Output Power Texas Instruments TI-RTOS and TI-15.4 Stack M-Bus, IEEE802.15.4g, Contiki 6LoWPAN, Wi-SUN, KNX RF […]

ONiO.zero offers a RISC-V Microcontroller that runs without battery

ONiO.zero

Energy harvesting has been an exciting area people have tried to venture into mostly because of the possible applications that can arise from it. Newly invented energy-harvesting technologies accompanying low-power computing systems have pushed the boundaries of where embedded systems can be deployed. The demand for an increase in connected applications which require an underlying embedded system, and as we know, all electronic devices require a power source of some sort. This power source, batteries in most cases, comes with an accompanying buck regulator of some sort that will tend to increase the BOM. Aside from the BOM rise from the usage of batteries, there is also the shelf life and environmental aspects. The Norwegian specialist ONiO has introduced the ONiO.zero to address those issues. Having no battery means fewer components and a smaller design, which can easily be integrated into a wide range of solutions – be it fabrics, […]

Nordic Semi nRF52833 WiSoC Supports Bluetooth 5.1 Direction Finding, Works up to 105ºC

nRF52833-DK

Nordic Semiconductors had added a new member to their RF52 multi-protocol wireless SoCs with nRF52833 that supports Bluetooth 5.1 direction finding and can operate in a wider temperature range between -40ºC and +105°C. The company also introduced nRF52833 DK development kit for Bluetooth Low Energy, Bluetooth mesh, Thread, Zigbee (802.15.4), and 2.4GHz proprietary applications, and some companies have already announced nRF52833 modules. Nordic Semi nRF52833 Bluetooth 5.1 SoC Key features and specifications: MCU Core – Arm Cortex-M4F @ 64 MHz Memory – 128 KB RAM Storage – 512 KB Flash Connectivity Bluetooth 5.1 @ 2 Mbps/1 Mbps/500 kbps/125 kbps 802.15.4 (Thread/Zigbee) @ 250 kbps 2.4 GHz proprietary @ 2 Mbps / 1 Mbps NFC-A tag TX power – Programmable from +8 dBm to -20 dBm in 4 dB steps Sensitivity Bluetooth 5: -103 dBm at 125 kbps; -98 dB at 500 kbps; -95 dBm at 1 Mbps; -92 dBm at […]

Ellisys Bluetooth Vanguard is a Best-in-Class Bluetooth Protocol Analyzer

Ellisys Bluetooth Vanguard Advanced All-in-One Bluetooth® Analysis System

ARM TechCon is Arm’s premier industry event, where developers, analysts, and media gather from all around to hear the latest from the semiconductor giant. ARM TechCon 2019 has marked the 15th annual event hosted in San Jose. Arm TechCon 2019 showcased some of the industry’s best products and solutions in the market. Embedded Computing Design hosted a Best in Show Awards showing some of the most innovative solutions from the even. One of the notable award recipients is the Ellisys Bluetooth Vanguard Protocol Analysis System. Ellisys Bluetooth Vanguard Advanced All-in-One Bluetooth Analysis System is being regarded as the most advanced and comprehensive Bluetooth Protocol analyzer ever made mostly because it delivers new advances designed to ease the increasingly complex tasks of Bluetooth developers and many more. Building Bluetooth based applications can be a daunting challenge, especially when working with the wrong tools/equipment. Aside from Bluetooth wireless traffic debugging, other information […]

FiRa Consortium Ultra Wide-Band Ecosystem To Deliver Precise Indoor Positioning

How does UWB work

The FiRa Consortium has just been established by the ASSA ABLOY Group which includes HID Global, and NXP Semiconductors, Samsung Electronics, and Bosch, and joined by Sony Imaging Products & Solutions Inc, LitePoint and the Telecommunications Technology Association (TTA) in order to grow the Ultra-Wideband (UWB) ecosystem providing accurate positioning for a variety of mobile and consumer applications. The FiRa stands for “Fine Ranging”, and UWB technology relies on the IEEE 802.15.4z standard that provides real-time centimeter accuracy indoor positioning. The consortium claims “UWB technology outperforms other technologies in terms of accuracy, power consumption, robustness in RF connection, and security, by a wide margin”, especially in challenging environments. The main roles of the FiRa Consortium will be to develop an interoperability standard, and promote the development of UWB applications. Some of the use cases include: Seamless Access Control – UWB can identify an individual’s approach toward or away from a […]

EDATEC Raspberry Pi 5 fanless case