802.15.4 News - CNX Software - Embedded Systems News

March 10, 2026 by Jean-Luc Aufranc (CNXSoft) - No Comments

NXP i.MX 93W wireless MPU SiP pairs dual-core Arm Cortex-A55 processor with NXP iW610 WiFi 6, Bluetooth LE, and 805.15.4 radio

NXP i.MX 93W is the company’s first integrated wireless MPU System-in-Package (SiP) and combines a dual-core Cortex-A55 processor (NXP i.MX 93) with an iW610 WiFi 6, Bluetooth LE, and 802.15.4 tri-radio into a single chip. The 14.2 x 12 mm package also includes all the external radio components needed for wireless connectivity, replacing up to 60 discrete components on the PCB. NXP says it reduces the PCB area, simplifies PCB design and regulatory approval, and speeds up time-to-market. NXP i.MX 93W specifications: CPU Dual-Core Arm Cortex-A55 at up to 1.7 GHz Arm Cortex-M33 core at 250 MHz for real-time control GPU – 2D graphics accelerator AI accelerator – Arm Ethos-U65 microNPU Memory I/F – Up to 3.7GT/s 16-bit LPDDR4/LPDDR4X with inline ECC Storage I/F – 2x SD 3.0/SDIO 3.0/eMMC 5.1 Display Interfaces MIPI DSI up to 1080p60 LVDS up to 720p60 24-bit parallel RGB Camera Interface – 2-lane MIPI CSI up […]

February 25, 2026February 25, 2026 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Telink ML9118A – A 32-bit RISC-V IoT module with Wi-Fi 6, Bluetooth 5.4, and 802.15.4 connectivity

Telink ML9118A is a wireless IoT module with Wi-Fi 6, Bluetooth 5.4, and 802.15.4 (Zigbee/Thread/Matter) connectivity designed for smart home, smart lighting, and smart remote control applications. The module also features a 32-bit RISC-V microcontroller clocked at 160 MHz with 576KB SRAM, 4MB flash, and various peripheral interfaces such as SDIO 3.0, 19x GPIOs, I2C, SPI, UART, as well as I2S for audio. Telink ML9118A module (ML9118A-GAIA-M0-PG12) specifications: MCU – 32-bit dual-core RISC-V MCU @ 160MHz Memory – 576KB SRAM Storage – 4MB embedded ﬂash Wireless 2.4 GHz Wi-Fi 6 IEEE 802.11 b/g/n/ax with support for DL/UL OFDMA, RX STBC, TWT, etc… Bluetooth 5.4 LE up to 2 Mbps bit rate 802.15.4 radio for Matter 1.3, Zigbee 3.0 compatible with ZHA and ZLL, Thread 2.4GHz proprietary – Supports Matter over Wi-Fi and Thread Tx Power – 15dBm @ Bluetooth LE mode Rx Sensitivity -88dBm @ 11B CCK 11Mbps -76dBm @ […]

February 11, 2026 by Debashis Das - No Comments

ESP32 Marauder 5G – Apex 5 module for Flipper Zero combines ESP32-C5, two Sub-GHz radios, nRF24, and GPS

Designed by HoneyHoneyTrading, the ESP32 Marauder 5G – Apex 5 Module is an ESP32-C5-based hacking and penetration testing tool for the Flipper Zero, with dual-band WiFi 6 (2.4GHz and 5GHz), two Sub-GHz radios (868MHz and 433MHz), an NRF24 radio, and a built-in GPS. This new Flipper Zero module can be considered an upgrade from the ESP32 Marauder – Double Barrel 5G, as it does not rely on a dual-chip configuration for 5 GHz operation, leveraging the ESP32-C5 dual-band capabilities instead. A microSD card slot handles storage, and the device can also save data directly to the Flipper Zero’s microSD card. It also features five antennas, including WiFi, Sub-GHz, nRF24, and GPS, along with dedicated LED indicators for the Sub-GHz radios and nRF24 activity. There is also a hardware button to toggle 433 MHz and 868 MHz Sub-GHz operation, a USB-C port, and a side button for power management and firmware […]

January 26, 2026January 25, 2026 by Debashis Das - No Comments

Infineon AIROC ACW741x Wi-Fi 7 ultra-low power tri-radio IoT SoC family support MLO, Wi-Fi sensing, BLE 6.0, and Thread

Infineon AIROC ACW741x family of Wi Fi 7 ultra low power tri radio IoT SoCs

Infineon has introduced the AIROC ACW741x tri-radio Wi-Fi 7 wireless SoC family designed for IoT and smart home devices. The company mentions it’s the first Wi-Fi 7 solution with a “20 MHz” 1×1 Wi-Fi 7 radio, Bluetooth 6.0 (including Channel Sounding), and an 802.15.4 radio for Thread and Matter support, in a 7×7 mm QFN package. When we think of Wi-Fi 7 (802.11be), we usually picture high-end routers and smartphones with gigabits of data over the huge 320 MHz channels. But the standard also includes features specifically designed for low-power IoT devices. Infineon’s new AIROC ACW741x family, which they claim is the “industry’s first” Wi-Fi 7 SoC specifically optimized for IoT applications, including smart home, battery-powered sensors, access control systems, asset tracking, video doorbells, IP cameras, smart locks, thermostats, and other always-connected devices requiring secure, low-power wireless connectivity. Infineon AIROC ACW741x specifications : Wireless Connectivity Wi-Fi 7 (802.11be) 1×1 SISO, […]

January 21, 2026January 20, 2026 by Debashis Das - 1 Comment

M5MonsterC5 hacking tool adds ESP32-C5 and 5 GHz Wi-Fi 6 support to M5Stack Cardputer ADV and Tab5

Developed by Laboratorium in Poland, the M5MonsterC5 is an ESP32-C5-based “Marauder” hacking tool designed to work with M5Stack Cardputer ADV or M5Stack Tab5. It gets connected to the Cardputer ADV or Tab5 via a Grove connector and runs JanOS and Project Zero for wireless security research, experimentation, and rapid prototyping with minimal setup. Built around the ESP32-C5, the device supports dual-band Wi-Fi 6 (2.4/5-GHz) and 802.15.4 (Thread/Zigbee) to the M5Stack devices. Key features include multi-channel deauthentication with 5 GHz support, Evil Twin and phishing captive portals, WPA3 SAE overflow attacks, wardriving with GPS logging and WiGLE-compatible exports, passive sniffing, Karma attacks, whitelist management, and persistent “blackout” modes. The platform uses a two-stage web-based flashing process (JanOS on the Monster board and a Cardputer app flasher), offers microSD card and optional GPS support, and is intended strictly for authorized Wi-Fi auditing, offensive security research, and educational use under the Project Zero […]

January 20, 2026January 19, 2026 by Debashis Das - 1 Comment

Waveshare ESP32-C6-GEEK – A USB flash drive-like ESP32-C6 development board

After releasing the RP2040-GEEK and RP2350-GEEK, Waveshare has now released the ESP32-C6-GEEK, another USB flash drive-like development board featuring an ESP32-C6 wireless MCU with support for Wi-Fi 6, Bluetooth LE, and IEEE 802.15.4 for Zigbee and Thread connectivity, an onboard 1.14-inch 240 × 135 IPS color LCD, and a USB-A male connector. The board also includes a microSD card slot for external storage, an onboard ceramic antenna, a BOOT button, and UART, GPIO, and I²C connectors for expansion. These features make it suitable for IoT nodes, smart displays, wireless sensors, protocol experimentation, beginner firmware development, and compact embedded UI projects. Waveshare ESP32-C6-GEEK specifications: SoC – Espressif Systems ESP32-C6 CPU Single-core 32-bit RISC-V clocked up to 160 MHz Low-power RISC-V core @ up to 20 MHz Memory/Storage – 512KB SRAM, 320KB ROM Wireless – 2.4 GHz WiFi 6, Bluetooth 5.3, and 802.15.4 radio for Thread/Zigbee Storage 16 MB external NOR flash MicroSD […]

January 16, 2026 by Jean-Luc Aufranc (CNXSoft) - No Comments

XIAO ESP32-C5 – A tiny USB-C IoT board with dual-band WiFi 6, Bluetooth 5.0 LE, Zigbee, and Thread connectivity

Seeed Studio has just added a new member to its XIAO USB-C board family with the XIAO ESP32-C5 offering dual-band WiFi 6 (2.4 and 5.0 GHz), as well as Bluetooth 5.0 LE, Zigbee, and Thread connectivity for IoT projects and products. It still features a u.FL antenna connector, Reset and Boot buttons, two 7-pin GPIO headers, and 8 pads for JTAG or GPIOs on the back. Compared to the earlier XIAO ESP32C6, the new model is clocked higher (240 MHz vs 160 MHz), supports dual-band Wi-Fi, and offers more memory (384KB SRAM + 8 MB PSRAM vs 512KB SRAM) and storage (8MB vs 4MB flash), but exposes fewer analog pins (5 vs 7). XIAO ESP32-C5 specifications: Wireless MCU – Espressif Systems ESP32-C5HR8 CPU Single-core 32-bit RISC-V processor @ up to 240 MHz Low-power RISC-V core @ 48 MHz acting as the main processor for power-sensitive applications Memory – 384 KB […]

January 9, 2026January 9, 2026 by Debashis Das - No Comments

Quectel SRG091X and SRG093X NXP i.MX 9 industrial AIoT modules integrates Wi-Fi 6, Bluetooth 5.4, and 802.15.4 radios

Quectel SRG091X and SRG093X NXP i.MX Smart AIoT module

After releasing the very powerful P895BD-AP AIoT module at CES 2026, Quectel now released two new low-power industrial AIoT modules based on NXP’s i.MX 9 series SoCs. The module integrates Wi-Fi 6, Bluetooth 5.4, and 802.15.4 radios through the IW610G chipset, so it can simply be dropped into a PCB to create a fully compliant Matter Border Router without any RF design or coexistence concerns. While both modules share the same 46 x 41.5 mm form factor and wireless capabilities, they are different in terms of CPU power as the SRG091X is an entry-level solution built around a single-core NXP i.MX 91 processor, while the SRG093X features dual-core NXP i.MX 93 SoC, which includes a Cortex-M33 real-time core and a neural processing unit (NPU) for edge AI workloads. The module supports LPDDR4/LPDDR4X memory, eMMC storage, and various I/O options, including dual Gigabit Ethernet, USB 2.0, CAN-FD, SPI, UART, I²C/I³C, ADC, […]