ethernet News - Page 19 of 19 - CNX Software

December 5, 2014 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Mini Review of Jesurun T034 Android TV Stick Featuring a Gigabit Ethernet Port

The vast majority of Android TV sticks only provide Wi-Fi to connect to the Internet, but Jesurun T034 is one of the rare TV stick that also features an Ethernet interface, and a Gigabit one at that. I’ve already listed specifications and uploaded pictures of the device, so today it’s time for a review. I’ve reviewed so many Rockchip RK3288 devices in the past, so I won’t write my usual full review, but I will focus on network connectivity, internal storage performance, stability / temperature measurements, as I’ve found high temperature to be problematic in another RK3288 TV stick, and I’ll quickly show the launcher, test the remote with the extension cable, and run Antutu 5.3 benchmark. Jesurun T034 User Interface and Remote Control I’ve connected the IR extension cable, an Ethernet cable, the RF dongle for Mele F10 Deluxe to the USB port, and the RF dongle for Tronsmart […]

October 17, 2014October 17, 2014 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Mini PC Polls: Networking Connectivity, Video and Audio Outputs

It’s always interesting to find out how people use their devices, and I recently discovered Google+ support Polls as Droidmote posted a poll to find out whether people used Wi-Fi or Ethernet with their mini PCs, and I followed up with polls about video and audio outputs. Around 50 people have answered to each poll up to now, so even if it may not representative, let’s have a look at the results so far. About half of the people are connected via Ethernet, and the other half are using Wi-Fi after 43 votes. Wi-Fi is normally more convenient, but may not be as reliable, and for users playing high bitrate videos Ethernet is a must, unless you find buffering enjoyable…. After 58 votes, most people still connect their mini PC to a Full HD television via HDMI, with a few connecting it to a 4K UHD TV, and nobody using […]

September 30, 2014September 30, 2014 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Finally… An Android TV Stick with an Ethernet Port

Ever since MK802 hit the market in April 2012, I’ve been expecting HDMI TV Sticks with Ethernet ports, but it never really materialized. There have been many small TV boxes, but AFAIK none of which could simply be insert in the back of your TV. Thanks to MK802 V we now have an HDMI TV dongle, powered by Rockchip RK3288 quad core Cortex A12/A17 processor, featuring an Ethernet port. MK802 V specifications: SoC – Rockchip 3288 quad core ARM Cortex A12/A17 up to 1.8 GHz with Mali-T764 GPU System Memory – 2 GB DDR3 Storage – 8 GB NAND flash (16GB optional) + micro SD slot (up to 32GB) Video / Audio Output – HDMI 2.0 (male) Video Codecs – MPEG-1, MPEG-2, MPEG-4, H.263, H.264, H.265, AVS, VC-1, RV, VP6/VP8, MVC (1080p) Sorenson Spark, MVC up to 4K2K @ 60fps Audio Formats – MP1, MP2, MP3, WMA, WAV, OGG, OGA, […]

April 26, 2014January 17, 2019 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

How to Make a $15 Web Server for IoT Applications

Arduino_Leonardo_Ethernet_ENC28J60_Assembled

If you have an embedded project that requires some GPIOs, and Ethernet connectivity, you now have a few choices of low cost low boards such as the Raspberry Pi with Broadcom ARM11 SoC for $35 + shipping, Texas Instruments Connected LaunchPad with an ARM Cortex M4 MCU for $20 including shipping, and today I’ve given a try at a solution to run an HTTP server with an Arduino Leonardo clone connected to ENC28J60 Ethernet module that together cost about $15 including shipping. This Ethernet module has been around for a while and is well supported, I just never took the time to give it a try before. I’ve purchased ENC28J60 module on eBay for $3.46 and connected it via SPI to an Arduino Leonardo clone I acquired as part of a kit via Indiegogo for $12. The kit is not available for purchase outside the crowdfunding campaign, but you can […]

September 16, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

GOsingGO GSG-TB06 Android TV Stick Features an Ethernet Port

There’s a plethora of Android HDMI TV dongles, but all of them only provide Wi-Fi connectivity, and if you need better network performance you need to add Ethernet via an USB to Ethernet dongle. There’s now another solution, that may not be very new, with GOsingGO GSG-TB06 a mini PC based on AllWinner A10 that includes an Ethernet Port. Here are the specifications of the device: SoC – Allwinners A10 @ 1.0GHz System Memory – 1GB RAM Storage -4 to 32 GB flash + micro SD card slot Video output – HDMI & AV USB – 1x USB 2.0, 1x micro USB for power Connectivity – Ethernet (RJ45) + Wi-Fi 802.11 b/g/n (AR6103) Dimensions – 105L x 37W x 15.6Hmm The device comes with a USB power adapter, an RCA (AV) cable, and a user’s manual. The manufacturer says it’s running Android 4.1. The specs are not that great, but […]

May 9, 2012July 17, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

IEEE Updates 802.11 Standard to Support 600Mb/s Wi-Fi and Approves 802.1aq Standard for Large Ethernet Networks

IEEE has recently announced a standard update for WiFi (802.11-2012) which adds support for 3.7 GHz bands, 600Mb/s throughput and mesh networking among other things, and approved 802.1aq Shortest Path Bridging standard, which will streamline the creation and management of large Local and Metropolitan Area networks by using the next-generation VLANs. IEEE Wi-Fi 802.11-2012 Standard IEEE 802.11-2012 is the 4th revision of the Wi-Fi standard. It has been expanded by supporting faster and more secure devices, while offering improved Quality of Service and cellular network hand-off. Key amendments to the standard: IEEE 802.11n now defines MAC and PHY modifications to enable throughput up to a maximum of 600Mb/s Direct-link setup “Fast roam” Radio resource measurement Operation in the 3650-3700MHz band Vehicular environments, mesh networking, security, broadcast/multicast and unicast data delivery Interworking with external networks and network management. IEEE 802.11 is available for purchase for $5 at the IEEE Standards Store. […]