ameriDroid introduces $20 aluminum case for ODROID-N2+ SBC

ODROID N2+ Plus metal case

You may know ameriDroid as a reseller of single board computers and accessories, but the US company has now designed and manufactured its first accessory with an aluminum case for ODROID-N2+ SBC. ameriDroid says the design of their enclosure is based on the metallic blue case found in the Home Assistant Blue gateway also powered by ODROID-N2+ board, and everything was 100% designed and manufactured by ameriDroid in the United States, specifically in Kentucky and California for the R&D, while the factory is located in Ohio. The enclosure has mostly been designed for industrial application, think of a factory floor for instance, so it may not be the prettiest. The company even explains that it is made of unpainted, unfinished aluminum with potentially some minor surface marks from the manufacturing process, but that it could be polished or painted for a better finish. It ships as a kit with an […]

Hardkernel launches ODROID-M1 Rockchip RK3568B2 SBC

ODROID-M1

It’s been a while since we have seen new hardware from Hardkernel, but the Korean company has just launched the ODROID-M1 SBC powered by Rockchip RK3568 with up to 8GB RAM. The single board computer is cooled with a large heatsink placed underneath, supports SATA and NVMe storage, offers HDMI and MIPI DSI video output, Gigabit Ethernet networking, as well as two USB 3.0, two USB 2.0 ports, an RTC backup battery, and a 40-pin GPIO header. ODROID-M1 specifications: SoC – Rockchip RK3568B2 quad-core Cortex-A55 processor @ up to 2.0 GHz with Arm Mali-G52 MP2 GPU, 0.8 TOPS AI accelerator System Memory – 4GB or 8GB LPDDR4 RAM Storage 16MB SPI flash preinstalled with Petitboot MicroSD card socket eMMC module socket Native SATA 3.0 port + SATA power (5V only) tested up to around 500 MB/s M.2 NVMe M-Key socket (2-lane PCIe 3.0) for M.2 SSDs tested up to around […]

Linux 5.17 release – Main changes, Arm, RISC-V, and MIPS architectures

Linux 5.17 changelog

Linus Torvalds has just released Linux 5.17: So we had an extra week of at the end of this release cycle, and I’m happy to report that it was very calm indeed. We could probably have skipped it with not a lot of downside, but we did get a few last-minute reverts and fixes in and avoid some brown-paper bugs that would otherwise have been stable fodder, so it’s all good. And that calm last week can very much be seen from the appended shortlog – there really aren’t a lot of commits in here, and it’s all pretty small. Most of it is in drivers (net, usb, drm), with some core networking, and some tooling updates too. It really is small enough that you can just scroll through the details below, and the one-liner summaries will give a good flavor of what happened last week. Of course, this means […]

ODROID-GO Advance Black Edition is selling for $29.50 (Promo)

ODROID GO Advance Black Edition

Hardkernel is having a “Black Friday” sale for the ODROID-Go Advance Black Edition portable game console that is now selling for $29.50, or exactly half of the normal price ($59.00), with either the transparent or black enclosure. As a reminder, the OGA Black Edition is a Linux console powered by a Rockchip RK3326 quad-core Arm Cortex-A35 processor coupled with 1GB RAM and a 3.5-inch display. This model builds on the earlier ODROID-Go Advance model by adding a WiFi & Bluetooth module, a USB-C port for charging, as well as some extra buttons. ODROID-Go Advance Black Edition specifications: SoC – Rockchip RK3326 quad-core Arm Cortex-A35 processor @ 1.3GHz with Mali-G31 MP2 GPU System Memory – 1GB DDR3L @ 786Mhz, 32 Bits bus width Storage – 16MB SPI Flash for bootloader, Micro SD Card slot (UHS-1 Capable interface) Display – 3.5″ 320×480 TFT LCD (Wide-viewing angle display, MIPI-DSI interface) Audio – 3.5mm […]

Smart Power 3 – A $45 smart power analysis tool for embedded systems developers

Smart Power 3

Hardkernel has launched a number of popular Arm SBC’s with the ODROID family over the years, but the Smart Power 3 is a different type of product, as the ESP32-based smart power meter can help embedded systems engineers optimize their hardware and software power consumption and/or check for spurious power peaks during boot up or shutdowns. In the past, we’ve reviewed relatively expansive tools like Qoitech Otii Arc or gone the DIY route,  but at $45, Hardkernel offers a power monitoring solution that’s both inexpensive and easy to use, albeit with fewer features than Qoitech’s device. Smart Power 3 specifications: MCU – ESP32 dual-core microcontroller via ESP32-WROOM-32E module Output Channels – 2x output channels (Max 50W + 50W) via 2x 4mm banana jacks each Output Voltage – 3V DC to input voltage – 1V Output Current – 3A max per channel Measurement Voltage, Current, Power Maximum sampling rate: 200Hz (5msec […]

ODROID-H2+ SBC discontinued due to supply shortage

ODROID-H2+ discontinued

Hardkernel has just discontinued ODROID-H2+ single board computer based on the Intel Celeron J4115 Gemini Lake Refresh processor, which followed ODROID-H2 SBC itself being discontinued shortly after Intel decided to phase out Intel J4105 and other Gemini Lake processors. The reason given is the “uncertain situation of main component supply”, which could mean Celeron J4115 processor is hard to get (or expensive), or the Realtek RTL8125B chipset provides 2.5GbE networking. That means Hardkernel does not offer any x86 SBC at this time. That’s a shame before ODROID-H2+ was a well-supported SBC running Linux or Windows, and great value for money at $119, especially for people interested in the two 2.5 Gbps Ethernet ports found on the board (and upgradeable to six), not to mention support for SO-DIMM memory and M.2 NVMe SSD. Update: There were multiple components with very long lead times that must have contributed to the situation as […]

ODROID-N2+ SBC gets Ubuntu 21.10, Chromium OS with Panfrost open-source GPU driver

ODROID-N2+ running Ubuntu 21.10 with Panfrost

Panfrost open-source driver for Arm Mali Bifrost and Midgard GPUs has come a long way, and Hardkernel’s ODROID-N2+ board now supports Ubuntu 21.10 and Chromium OS with 3D graphics acceleration through the Panfrost driver. As a reminder, ODROID-N2+ is a single board computer powered by an Amlogic S922X Rev.C processor clocked at 2.4GHz with an Arm Mali-G52 GPU, with up to 4GB RAM, and which comes with HDMI 2.0, Gigabit Ethernet, four USB 3.0 ports, plus a GPIO header. ODROID-N2+ with Ubuntu 21.10 + Panfrost Ubuntu 21.10 Impish Indiri is supposed to be released on October 14, 2021 together with Gnome 40, but Hardkernel released a development version as early as August, with Linux 5.14 and Panfrost GPU acceleration as you can see from the screenshot above. The Ubuntu 21.10 image for ODROID-N2+ and the earlier ODROID-N2 SBC cannot be found in the Wiki just yet, but should be there […]

The 5 best Intel & AMD single board computers for makers

Best Intel AMD single board computers for makers

A few weeks ago, we wrote a list of what we consider to be the top 5 most powerful Arm SBC’s and development kits, and this time around we’ll cover x86 SBC’s powered by Intel or AMD processors. But this time around, instead of focusing on the most powerful x86 single board computers which would lead to unaffordable, industrial Xeon SBC’s, we’ll be looking into the 5 best boards designed for makers. That means affordable pricing, I/O headers, and community support. The list is in no particular order. Rock Pi X – x86 on the cheap If you ever wanted the cheapest possible x86 board, Atomic Pi SBC $35 price tag was hard to beat, but it was only cheap because it was sourced from a failed robotics project, and not very convenient to use. But now in 2021, the cheapest x86 SBC that can run Windows is clearly Rock […]

Exit mobile version
Memfault IoT and embedded debugging platform