industrial News - Page 63 of 114 - CNX Software

January 4, 2023January 6, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

ASRock NUC 1300 BOX/ NUCS 1300 BOX mini PCs are powered by Intel Raptor Lake-P mobile processors

ASRock Industrial NUC 1300 BOX and NUCS 1300 BOX series mini PCs are equipped with Intel 13th generation Raptor Lake-P mobile processors up to the Core i7-1360P 12-core hybrid processor with four Performance cores and eight Efficiency cores. Yesterday, we wrote about the ADLINK Express-RLP COM Express module based on Raptor Lake-P embedded or industrial processors, but ASRock decided to use Raptor Lake-P mobile processors in their industrial “fanned embedded box PCs” coupled with up to 64GB DDR5/DDR4 memory, and featuring high-speed interfaces such as USB4, 2.5GbE, and more. NUCS 1300 BOX Series Two NUCS 1300 Box models are available with either an Intel Core i7-1360P or i5-1340P processor. NUCS 1300 Box specifications: Raptor Lake-P SoC NUCS BOX-1340P/D4 – Intel Core i5-1340P 12-core (4P @ 1.9/4.6 GHz + 8E @ 1.4/3.4 GHz) processor with 80EU Intel Iris Xe Graphics; PBP: 28W, MTP: 64W NUC BOX-1360P/D4 – Intel Core i7-1360P 12-core […]

January 3, 2023January 27, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

COM Express & COM-HPC modules features Intel 13th gen Raptor Lake embedded processors

ADLINK has just announced the Express-RLP COM Express Type 6 and COM-HPC-cRLS COM-HPC size C modules based on the new Intel 13th generation Raptor Lake hybrid processors with Embedded and Industrial SKUs. The Express-RLP comes with an up to 14 cores, 20 threads Raptor Lake-P processor, 64GB DDR5 SO-DIMM, and PCIe Gen4, while the COM-HPC-cRLS offers up to a 24-core Rasptor Lake-S embedded processor, 128GB DDR5 SO-DIMM, PCIe Gen5, and 2x 2.5GbE LAN. Both modules support Intel TCC, and Time Sensitive Networking (TSN), and are suitable for hard real-time computing workloads required by applications such as industrial automation, autonomous driving, AI robots, and aviation. Express-RLP Raptor Lake-P COM Express module Specifications: Raptor Lake-P SoC (one of the other) Intel Core i7-13800HRE 6P+8E cores/20 threads processor @ up to 2.5 GHz with 24MB cache, Intel Iris Xe graphics; TDP: 45W (cTDP: 35W) Intel Core i7-1370PRE 6P+8E cores/20 threads processor @ up […]

January 3, 2023 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

MediaTek Genio 700 Cortex-A78/A55 IoT processor targets industrial and Smart Home applications

MediaTek Genio 700 is an octa-core Arm processor with two Cortex-A78 cores, six Cortex-A55 cores, a Mali-G57 GPU, and a 4 TOPS AI accelerator designed for consumer and industrial IoT applications. The new processor is a cost-down version of the Genio 1200 premium AIoT processor introduced last year with four Cortex-A78 and four Cortex-A55 cores. The Genio 700 offers many of the same features but with lower performance/capabilities, including a 3-core GPU and an AI accelerator limited to 4.0 TOPS, as well as support for dual displays up to 4K + Full HD (instead of 2x 4K), and 32MP single cameras (instead of 48 MP). MediaTek Genio 700 specifications: CPU – Octa-core processor with 2x Cortex-A78 cores @ up to 2.2 GHz, 6x Cortex-A55 cores @ up to 2.0 GHz GPU – Arm Mali-G57 MC3 GPU VPU Encoding up to 4Kp60 with H.265/HEVC Decoding up to 4Kp75, AV1, VP9, HEVC, […]

December 29, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Pico-ITX SBC features NXP i.MX 93 LGA system-on-module

iWave Sytems iW-RainboW-G50M is an NXP i.MX 93 OSM-L compliant LGA module with up to 2GB RAM, WiFi 5 and Bluetooth 5.2 module that is found in the company’s iW-RainboW-G50S Pico-ITX SBC designed for industrial applications. The NXP i.MX 93 single and dual-core Cortex-A55 processor with an Ethos U65 microNPU was announced in November 2021, but we had yet to see any hardware based on the new NXP i.MX 9 processor family. The iW-RainboW-G50M and iW-RainboW-G50S change that with a system-on-module and single board computer. iW-RainboW-G50M NXP i.MX 93 system-on-module Specifications: SoC (one or the other) NXP i.MX 9352 dual-core Cortex-A55 processor @ up to 1.7 GHz with Arm Cortex-M33 @ 250 MHz, 0.5 TOPS NPU NXP i.MX 9351 single-core Cortex-A55 processor @ up to 1.7 GHz with Arm Cortex-M33 @ 250 MHz, 0.5 TOPS NPU NXP i.MX 9332 dual-core Cortex-A55 processor @ up to 1.7 GHz Arm Cortex-M33 @ […]

December 27, 2022 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

AAEON RTC-710AP rugged tablet features hot-swappable battery for continuous operation

AAEON RTC-710AP is a 7-inch rugged tablet powered by an Intel Celeron N3350 or Pentium N4200 Apollo Lake processor with up to 8GB LPDDR4 memory, 128GB eMMC flash, WiFi, Bluetooth, and optional 4G LTE connectivity. as well as GNSS supports. The IP65-rated tablet also comes with five physical function keys, an NFC reader, a 2MP front-facing camera, an 8MP rear camera, and an I/O expansion module for a 2D barcode scanner, LAN, UART, and other options. It also features a master battery and a hot-swappable slave battery to ensure continuous operation. AAEON RTC-710AP specifications: SoC (one or the other) Intel Celeron N3350 dual-core processor @ 1.1GHz / 2.4GHz with Intel HD Graphics 500; 6W TDP Intel Pentium N4200 quad-core processor @ 1.1GHz / 2.5GHz with Intel HD Graphics 505; 6W TDP Memory – 4GB LPDDR4 (default), up to 8GB as an option Storage 64GB eMMC flash (default), up to 128GB […]

December 21, 2022 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

EdgeBox-ESP-100 – An ESP32-S3 industrial controller with RS485, CAN Bus, DIO, 4G LTE, and more

We’ve previously covered the EdgeBox-RPi4 industrial controller powered by a Raspberry Pi Compute Module 4 and plenty of I/Os such as RS485, RS232, digital inputs and outputs, and connectivity options such as Gigabit Ethernet, WiFi 5, Bluetooth 5, and 4G LTE. But if you don’t quite need the power of a Linux controller, the EdgeBox-ESP-100 industrial edge controller based on an ESP32-S3 dual-core WiFi and Bluetooth microcontroller and offering a similar set of features, albeit with twists, may be an interesting option. EdgeBox-ESP-100 specifications: Microcontroller – Espressif Systems ESP32-S3 dual-core Tensilica LX7 microcontroller @ 240 MHz with AI vector instructions, 512KB RAM Memory – 8MB PSRAM Storage – 16MB Flash Network connectivity 10/100M Ethernet RJ45 port 2.4 GHz WiFi 4 and Bluetooth 5.0 LE via ESP32-S3 4G LTE cellular via SIMCom A7670G LTE Cat 1 module Optional support for LoRa (replaces the A7670G module) Serial & I/Os via terminal blocks […]

December 18, 2022December 18, 2022 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

OpenPLC open-source Programmable Logic Controller Suite works with Arduino, ESP8266/ESP32, Raspberry Pi, etc.

OpenPLC is an open-source, free-to-use Programmable Logic Controller Suite, compliant with the IEC 61131-3 standard, and working with a range of hardware platforms such as Arduino, ESP8266/ESP32, Raspberry Pi SBCs, as well as Windows and Linux machines. When Arduino unveiled the Arduino PLC IDE, we noted the languages defined by the IEC 61131-3 standard were licensed, and the PLC key for the Portenta Machine Control unit sold for $17.60. One reader complained about the high license cost per device, but Massimo Banzi, the co-founder of the Arduino project, replied it was cost-effective for smaller deployments: Actually it’s not that much money compared to the cost of other PLC software (thousands of dollars per seat!). This model helps small companies with not that many devices.. It’s possible to negotiate bulk licenses for companies. But there’s also another option with OpenPLC open-source PLC suite that does not require any license fee. That’s […]

December 13, 2022February 20, 2023 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Linux 6.1 LTS release – Main changes, Arm, RISC-V and MIPS architectures

Linus Torvalds announced the release of Linux 6.1, likely to be an LTS kernel, last Sunday: So here we are, a week late, but last week was nice and slow, and I’m much happier about the state of 6.1 than I was a couple of weeks ago when things didn’t seem to be slowing down. Of course, that means that now we have the merge window from hell, just before the holidays, with me having some pre-holiday travel coming up too. So while delaying things for a week was the right thing to do, it does make the timing for the 6.2 merge window awkward. That said, I’m happy to report that people seem to have taken that to heart, and I already have two dozen pull requests pending for tomorrow in my inbox. And hopefully I’ll get another batch overnight, so that I can try to really get as […]