industrial News - Page 77 of 129 - CNX Software

January 16, 2023January 16, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

Aetina unveils NVIDIA Jetson Orin Nano and Orin NX edge embedded systems

Aetina has recently announced several embedded systems based on NVIDIA Jetson Orin NX and Orin Nano which they showcased at CES 2023. We’ll specifically have a look at the AIE-KO21/31 and AIE-KN31/41 edge devices designed for mainstream and entry-level edge AI computing. NVIDIA introduced the NVIDIA Jetson Orin NX SO-DIMM modules in March 2022 and followed up with the lower-cost pin-compatible Jetson Orin Nano modules in September with mass production scheduled for Q4 2022 and Q1 2023 respectively. Last week, we covered the first NVIDIA Jetson Orin NX edge AI computer we had seen, namely Seeed Studio reComputer J4012, but it turns out Aetina also announced their own Jetson Orin NX/Orin Nano industrial embedded computers around the same time. Aetina AIE-KO21, AIE-KO31, AIE-KN31, and AIE-KN41 specifications: System-on-module AIE-KO21 – NVIDIA Jetson Orin Nano 4GB with up to 20 TOPS of AI performance AIE-KO31 – NVIDIA Jetson Orin Nano 8GB with […]

January 13, 2023January 13, 2023 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Renesas RL78/G15 8-bit MCU is offered in a 3x3mm package

Renesas Electronics RL78/G15 is an entry-level 8-bit microcontroller with 1 KB of SRAM, 4 or 8KB of code flash memory, and offered in package sizes ranging from 8 to 20 pins, down to an 8-pin device measuring just 3×3 mm. STMicro has just unveiled the STM32C0 32-bit microcontroller claiming “your next 8-bit MCU is a 32-bit” with packages from 8- to 48-pins and packages as small as 1.70 x 1.42 mm and 3x3mm, and a price similar to other 8-bit industrial microcontrollers. To that, I say “not so fast STMicro!”, as Renesas has just launched the 16 MHz RL78/G15 8-bit microcontroller family with many of the same features and target use cases as the STMC32C011 sub-family. Renesas RL78/G15 key features and specifications: CPU core – Renesas RL78 8-bit core @ up to 16 MHz Memory – 1NS SRAM, Storage – 4 to 8KB program flash, 1KB data flash Peripheral I/F […]

January 11, 2023 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Kontron D3724-R mSTX – A Mini-STX motherboard based on Ryzen Embedded R2000 CPU

AMD Ryzen Embedded R2000 mini STX motherboard

Kontron D3724-R mSTX is an upcoming industrial Mini-STX motherboard powered by an AMD Ryzen Embedded R2000 Series SoC and designed for applications with high graphical requirements such as casino gaming, medical displays, thin clients, and compact industrial PCs. The motherboard supports up to 32GB RAM, SATA & NVMe storage, and is equipped with up to three DisplayPort outputs, one HDMI port, as well as eDP and dual-channel LVDS interfaces to support up to four independent 4K displays. Kontron D3724-R mSTX specifications: SoC (One or the other) D3724-R1 – AMD Embedded R2312 dual-core/quad-thread processor @ 2.7 / 3.5 GHz (Turbo) with 3-core AMD Radeon Vega Graphics; 12-35W TDP D3724-R2 – AMD Embedded R2314 quad-core processor @ 2.1 / 3.5 GHz (Turbo) with 6-core AMD Radeon Vega Graphics; 12-35W TDP D3724-R3 – AMD Embedded R2514 quad-core/eight-thread processor @ 2.1 / 3.7 GHz (Turbo) with 8-core AMD Radeon Vega Graphics; 12-35W TDP System […]

January 10, 2023March 5, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

reComputer J4012 mini PC features NVIDIA Jetson Orin NX for AI Edge applications

reComputer J4012 is a mini PC or “Edge AI computer” based on the new NVIDIA Jetson Orin NX, a cost-down version of the Jetson AGX Orin, delivering up to 100 TOPS modern AI performance. The mini PC is based on the Jetson Orin NX 16GB, comes with a 128GB M.2 SSD preloaded with the NVIDIA JetPack SDK and offers Gigabit Ethernet, four USB 3.2 ports, and HDMI 2.1 output. Wireless connectivity could be added through the system’s M.2 Key E socket. reComputer J4012 / J401 specifications: SoM – NVIDIA Jetson Orin NX 16GB with CPU – 8x Arm Cortex-A78AE core @ up to 2.0 GHz with 2MB L2 + 4MB L3 cache GPU/AI 1024-core NVIDIA Ampere GPU with 32 Tensor Cores @ up to 918 MHz 2x NVDLA v2.0 @ 614 MHz PVA v2 vision accelerator 100 TOPS AI performance (sparse) Video Encoder (H.265) 1x 4Kp60 | 3x 4Kp30 6x […]

January 10, 2023January 10, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

MistySoM Renesas RZ/G2L or RZ/V2L SoM and devkit goes for $112 and up

MistySOM devkit Renesas RZ/G2L or RZ/V2L

We’ve previously written about several system-on-modules and SBCs based on Renesas RZ/G2L or RZ/V2L Cortex-A55/M33 processors such as Geniatech “AHAURA” RS-G2L100 and “AKITIO” RS-V2L100 single board computers, Forlinx FET-G2LD-C system-on-module, and SolidRun RZ/G2LC SOM and devkit. But most of those are hard to buy, and you need to contact the company, discuss your project, etc… before purchase, except for the SolidRun Renesas RZ/G2LC Evaluation Kit going for $249. Another option is the MistyWest MistySOM module offered for $112 and up on GroupGets with either Renesas RZ/G2L or RZ/V2L processor, as well as an optional carrier board. MistySOM system-on-module MistySOM-G2L (aka MW-G2L) and MistySOM-V2L (aka MW-V2L) specifications: SoC – Renesas RZ/G2L or RZ/V2L with dual-core Cortex-A55 processor @ 1.2 GHz, Arm Cortex-M33 core @ up to 200 MHz, Arm Mali-G31 GPU, and DRP-AI vision accelerator (RZ/V2L only) System Memory – 2GB LPDDR4/DDR4 Storage – 32GB eMMC flash 2x 120-pin high-speed mezzanine […]

January 5, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

NXP i.MX 95 processor features Cortex-A55, Cortex-M33, and Cortex-M7 cores, eIQ Neutron NPU

NXP i.MX 95 is an upcoming Arm processor family for automotive, industrial, and IoT applications with up to six Cortex-A55 application cores, a Cortex-M33 safety core, a Cortex-M7 real-time core, and NXP eIQ Neutron Neural Network Accelerator (NPU). We’re just only starting to see NXP i.MX 93 modules from companies like iWave Systems and Forlinx, but NXP is already working on its second i.MX 9 processor family with the i.MX 95 application processor family equipped with a higher number of Cortex-A55 cores, an Arm Mali 3D GPU, NXP SafeAssure functional safety, 10GbE, support for TSN, and the company’s eIQ Neutron Neural Processing Unit (NPU) to enable machine learning applications. NXP i.MX 95 specifications: CPU Up to 6x Arm Cortex-A55 cores with 32KB I-cache, 32KB D-cache, 64KB L2 cache, 512KB L3 cache with ECC 1x Arm Corex-M7 real-time core with 32KB I-cache, 32KB D-cache, 512KB TCM with ECC 1x Arm Cortex-M33 […]

January 4, 2023 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Forlinx FET-MX9352-C – An NXP i.MX 9352 system-on-module for industrial AIoT applications

Forlinx FET-MX9352-C is a system-on-module based on NXP i.MX 9352 dual Cortex-A55 processor with Cortex-M33 real-time core and a 0.5 TOPS AI accelerator that can be used for industrial control, IoT gateways, medical equipment, and various applications requiring machine learning acceleration. The FET-MX9352-C follows last week’s announcement of the iWave Systems iW-RainboW-G50M OSM module and SBC with a choice of NXP i.MX 93 processors. The Forlinx module comes with two board-to-board connectors instead of solderable pads and can be found in the OK-MX9352-C single board computer with dual GbE, various display and camera interfaces, RS485 and CAN Bus, etc… FET-MX9352-C i.MX 9352 system-on-module Specifications: SoC – NXP i.MX 9352 with 2x Arm Cortex-A55 cores @ up to 1.7GHz (commercial) or 1.5 GHz (industrial), Cortex-M33 real-time core @ 250 MHz, 0.5 TOPS Arm Ethos U65 microNPU System Memory – 1GB/2GB LPDDR4 RAM Storage – 8GB eMMC flash 2x high-density 100-pin board-to-board […]

January 4, 2023January 6, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

ASRock NUC 1300 BOX/ NUCS 1300 BOX mini PCs are powered by Intel Raptor Lake-P mobile processors

ASRock Industrial NUC 1300 BOX and NUCS 1300 BOX series mini PCs are equipped with Intel 13th generation Raptor Lake-P mobile processors up to the Core i7-1360P 12-core hybrid processor with four Performance cores and eight Efficiency cores. Yesterday, we wrote about the ADLINK Express-RLP COM Express module based on Raptor Lake-P embedded or industrial processors, but ASRock decided to use Raptor Lake-P mobile processors in their industrial “fanned embedded box PCs” coupled with up to 64GB DDR5/DDR4 memory, and featuring high-speed interfaces such as USB4, 2.5GbE, and more. NUCS 1300 BOX Series Two NUCS 1300 Box models are available with either an Intel Core i7-1360P or i5-1340P processor. NUCS 1300 Box specifications: Raptor Lake-P SoC NUCS BOX-1340P/D4 – Intel Core i5-1340P 12-core (4P @ 1.9/4.6 GHz + 8E @ 1.4/3.4 GHz) processor with 80EU Intel Iris Xe Graphics; PBP: 28W, MTP: 64W NUC BOX-1360P/D4 – Intel Core i7-1360P 12-core […]