A20-OLinuXino-LIME boards are the most popular development board sold by Olimex, likely thanks to reasonable pricing, and Allwinner A20 is one of the rare low cost processor to features an actual SATA interface and Gigabit Ethernet support. The company has now launched a new version A20-OLinuXino-LIME2-eMMC, based on A20-OLinuXino-LIME2-4GB, but replacing the NAND flash by an eMMC flash that should offer both better performance and reliability. A20-OLinuXino-LIME2-eMMC specifications: SoC – Allwinner A20 dual-core ARM Cortex-A7 CPU @ 1.0 GHz with dual-core Mali 400 GPU System Memory – 1GB DDR3 Storage – 4GB eMMC flash (Micron), SATA data and power connectors, micro SD slot, 2KB EEPROM for MAC address and custom data Connectivity – Gigabit Ethernet Video Output – HDMI up to 1080p60 USB – 2x USB 2.0 host ports with power control and current limiter, 1x micro USB-OTG with power control and current limiter Expansion – 160 GPIOs on four […]
Orbitty is a $175 Carrier Board for Nvidia Jetson TX1 System-on-Module
Connect Tech had already launched Astro carrier board for Nvidia Tegra X1 based Jetson TX1 CPU module, which they also integrated into Rosie Military Grade Embedded mini PC. Since them the Canadian company had also introduced a low cost “Elroy” carrier board , and more recently, a third cheaper baseboard called Orbitty selling for $175 and up, and including Gigabit Ethernet, USB 3.0 & 2.0 ports, HDMI, and more. Orbitty (ASG003) carrier board specifications: Compatibility – Nvidia Jetson TX1 system-on-module Storage – micro SD slot Video & Audio Output – 1x HDMI Connectivity – Gigabit Ethernet (RJ45) USB – 1x USB 3.0 port, 1x micro USB 2.0 OTG port Expansion Header – 20-pin header with 2x 3.3V UART, I2C, 4x GPIO, etc… Power Supply – 9 to 19V DC via terminal block Dimensions – 87 x 50mm Operating Temperature – -40°C to +85°C The carrier board targets robotics and unmanned […]
Rosie is a Military Grade Embedded mini PC Powered by Nvidia Tegra X1 Processor
Rosie, who also goes under the less fancy name ESG501, is a rugged embedded computer made by Connect Tech, powered by Nvidia Tegra X1 octa-core 64-bit ARM processor, compliant with MIL-STD 810g and DO-160G certifications for shock and vibrations, and IP67/IP68 ingress protection ratings for dust- and water-proofness. Rosie ESG501 specifications: SoC – NVIDIA Tegra X1 octa core Cortex A57/A53 processor @ with 256-Core Maxwell GPU System Memory – 4GB LPDDR4 Storage – 16GB eMMC Video Output – 1x HDMI Type A Video Inputs – 4 x Parallel or CSI-2/MIPI camera sensor inputs via SMA connectors Connectivity – 2x Gigabit Ethernet (10/100/1000) RJ-45 ports, 802.11ac 2×2 WiFi, and Bluetooth 4.0 (up to 24Mbps) with two antennas USB – 2x USB 2.0 Type A port Serial – 1x RS-232 with Modem (TX/RX/RTS/CTS) Power Supply – +9V to +36V Dimensions 163.6mm x 108.0mm x 96.3mm (without mounting brackets) 163.6mm x 146.1mm x […]
Avnet Introduces Zynq Based MicroZed Industry 4.0 / IIoT Ethernet Kit
There’s a lot of buzz around IoT, and the industrial sector is also trying to build smarter factories using protocols or standards part of Industry 4.0 or Industrial IoT (IIoT) depending on the country or group you belong too. Avnet has just launched MicroZed Industry 4.0 Ethernet Kit (I4EK) based on Xilinx Zynq-7000 ARM & FPGA SoC to address this market with support for the most common industrial protocols such as EtherCAT, Powerlink, PROFINET RT/IRT, EtherNet/IP, and Modbus-TCP. The “brain” of the development board is MicroZed module powered by Zilinx Zynq-7020 dual core Cortex A9 processor with FPGA fabric, and coupled with 1GB RAM, 128 MB SQPI flash, a Gigabit Ethernet port, and various I/Os. The module is connected to MicroZed FMC Carrier board with the following features: 2x 100-pin board-to-board MicroHeaders Xilinx PC4 header for download/debug – Accesses PL JTAG 5x Digilent Pmod compatible interfaces 39 user I/O 1x […]
Axiomtek ICO310 Din-rail Industrial IoT Gateway Supports Power over Ethernet (PoE)
Axiomtek ICO310 is a din-rail IIoT (Industrial IoT) embedded platform powered by Intel Celeron Braswell processors supporting up to 8GB RAM, PoE, and featuring two Gigabit LAN ports, RS-232/422/485 ports, USB 2.0 & USB 3.0 ports, one VGA port, and one DIO interface. It also support mSATA and SATA drives, and wireless module via mPCIe interfaces. Target applications include smart energy, smart factory automation, facility monitoring systems and more. Axiomtek ICO310 Specifications: SoC Intel Celeron N3060 dual core processor @ 1.6GHz / 2.48 GHz (Turbo) with Intel HD graphics 400 with 12EU @ 320/600 MHz OR Intel Celeron N3160 quad core processor @ 1.6GHz / 2.24 GHz (Turbo) with Intel HD graphics 400 with 12EU @ 320/640 MHz System Memory – 204-pin SO-DIMM DDR3L-1600 socket up to 8 GB Storage – 1 x mSATA, 1x SATA SSD (or HDD) Video Output – VGA Connectivity 2x 10/100/1000Mbps Ethernet, including 1x PoE PD […]
Intel Celeron N3060 based Industrial Fanless Touch Panel Computer Supports SATA Drives
Axiomtek GOT5103W-845 is a new IP65 industrial touch panel PC with a 10.1″ display, an Intel Celeron N3060 dual core processor, up to 8GB RAM, dual Gigabit Ethernet, USB 3.0, and support for half-slim SATA and mSATA SSD drives. Specifications: SoC – Intel Celeron N3060 dual core processor @ 1.6GHz / 2.48 GHz (Turbo) with Intel HD graphics 400 with 12EU @ 320/600 MHz System Memory – 1 x 204-pin SO-DIMM DDR3L-1600 up to 8 GB Storage – 1x mSATA, 1x optional half-slim SATA SSD Display – 10.1″ WXGA TFT LCD with LED and projected capacitive touch screen; 350 nits; 1280 x 800 resolution Video Output – 1x HDMI port Audio – 1x Line Out, HDMI, 2x speakers Connectivity – 2x 10/100/1000Mbps (Intel i211AT), optional WLAN antenna USB – 2x USB 2.0, 2 x USB 3.0 COM ports – 1 x RS-232; 1 x RS-232/422/485 Expansion for storage, Wifi, GPRS/GSM, […]
DAB Embedded OpenWrt Router Board Combines Atmel SAMA5D3 SoC and Altera MAX 10 FPGA
DAB Embedded, a Belgian engineering company specialized in research and development of electronic products, has designed DAB-OWT-SAM5 router board powered by Atmel SAMA5D36 Cortex-A5 processor and Altera MAX 10 FPGA, which runs OpenWrt or Windows Embedded Compact 7, and targets IoT applications. DAB-OWT-SAM5 board specifications: SoC – Atmel SAMA5D36 ARM Cortex-A5 processor @ 536MHz with Floating-Point Unit. FPGA – Altera MAX 10 FPGA with integrated ADC (Exact part number not disclosed) System Memory – Up to 512MB DDR2 Storage – Up to 2GB NAND flash, 1Mbit SPI flash, micro SD slot Connectivity – 2x Fast Ethernet ports, 802.11 b/g/n WiFi (Direct, station mode, and soft-AP) via Atmel ATWILC1000B module Display Interface – LVDS connected to FPGA USB – 1x USB 2.0 host, 1x USB 2.0 device Expansion Connectors Wired interfaces – RS232, CAN 2.0 A/B, KNX, RS-485/422, etc… Wireless connectivity – Zigbee, Z-Wave, KNX RF, etc… Power Supply – 5V DC […]
Isurki IRIS Industrial Embedded Computer Takes Nvidia or NXP System-on-Modules
Isurki is a Spanish company providing electronics & IT services to hydraulic resources management companies, and one of their products is IRIS industrial embedded computer based on Toradex Iris carrier board that supports Toradex Colibri ARM system-on-modules based on either Nvidia Tegra 2/3 or NXP Vybrid VF50/VF61 processors. Main board connectors and features: Video – DVI-I LCD Interface – RGB / LVDS with 4/5 resistive touch interface Audio – Line-In, line-Out, Mic-In Storage – Micro SD Connectivity – 10/100M Ethernet USB – 1x USB host, 1x USB OTG Expansion – 24 GPIOs, 3x UART ports Misc – 1x IrDA, RTC Power Supply – 6 to 27V DC, reverse polarity and short circuit protected Then you can choose among several variations of ARM based Colibri system-on-modules: Colibri T20 Nvidia Tegra 2 dual core Cortex A9 processor with 256 to 512MB DDR3, and 512MB to 1GB flash Dual independent displays 2D/3D hardware […]