Jetson News - Page 2 of 6 - CNX Software

April 16, 2026April 16, 2026 by Debashis Das - No Comments

IP65-rated TWOWIN T808P-G Edge AI computer features 8x GMSL2 cameras, aviation-grade M12/M16 connectors

TWOWIN Technology has introduced the TW-T808P-G, a rugged, fan-cooled, IP65 edge AI computer built around the NVIDIA Jetson Orin NX system-on-module (SoM). Designed specifically for autonomous driving, unmanned delivery vehicles, and smart inspection scenarios, the system provides up to 157 TOPS of AI performance and features various connectivity options for real-time processing in industrial and smart infrastructure environments. Housed in an aluminum alloy enclosure, the device features aviation-grade M12 and M16 connectors for Gigabit Ethernet (PoE), RS232/RS485 serial communication, and power. Other features include two FAKRA connectors for up to eight GMSL2 cameras, USB 3.0, CAN Bus, GPIO, HDMI, and M.2 NVMe storage. It also supports optional Wi-Fi, 4G/5G, and RTK GPS for centimeter-level positioning. With a wide 9–36V input, a zero-power standby design using automotive ACC (ignition) control, and an operating range of -40°C to +70°C, the system is designed for applications such as security monitoring, smart gas stations, […]

March 18, 2026 by Debashis Das - No Comments

High-end 25MP global shutter camera with 10GbE interface is designed for NVIDIA Holoscan platform

Leopardimaging LI-IMX530-10GigE-NL 10GigE Global Shutter IMX530 camera with Holoscan based solution

Leopard Imaging LI-IMX530-10GigE-NL is a high-end 25MP global shutter camera designed specifically for the NVIDIA Holoscan edge AI platform. The camera utilizes a 10GbE interface for high-bandwidth, low-latency data transmission, making it suitable for gesture recognition, iris scanning, head roll, and eye tracking. At the core of the camera module is the Sony IMX530, a 1.2-inch CMOS sensor with 5328 × 4608 resolution and a 2.74 μm pixel size. The sensor data is handled by a Lattice CertusPro-NX FPGA, and a Marvell 10GbE PHY takes care of high-bandwidth data transfer to GPU systems. The camera supports NVIDIA Jetson AGX Orin, IGX Orin, and Thor platforms. LI-IMX530-10GigE-NL specifications: FPGA – Lattice CertusPro-NX FPGA 52K to 96K logic cells 7.3 Mb total embedded memory External LPDDR4 memory support Up to 156x (18 x 18) multipliers within sysDSP blocks for AI/ML workloads 10 Gigabit Ethernet PCS blocks Image sensor Sony IMX530 Diagonal 19.3 mm […]

March 17, 2026 by Debashis Das - No Comments

ADLINK DLAP-701 – An NVIDIA Jetson T5000/T4000 Edge AI platform for humanoid robots and vision sensing systems

Adlink DLAP 701 Edge AI Platform Powered by NVIDIA Jetson Thor

ADLINK has just launched the DLAP-701 Series, a NVIDIA Jetson T5000/T4000-based compact edge AI platform designed for humanoid robots, autonomous mobile robots (AMR), and vision sensing systems (VSS). It supports up to 128GB LPDDR5X memory and features various I/O options, including dual Gigabit Ethernet, a QSFP port supporting 4×25GbE LAN, multiple USB 3.2 ports, and HDMI output, along with M.2 slots for Wi-Fi 6, 5G, and NVMe storage, as well as an mPCIe slot. It also integrates CAN-FD interfaces for robotics and vehicle control and TPM 2.0 security. With an operating voltage range of 9-36V DC and an industrial temperature range of -20°C to 60°C, it is designed for demanding edge environments. ADLINK DLAP-701 specifications Supported system-on-module – NVIDIA Jetson Thor T5000 or Jetson Thor T4000 Memory – Up to 128GB (T5000 variant), 64 GB (T4000 variant) 256-bit LPDDR5X (273 GB/s bandwidth) Storage 128GB SSD for the OS (most probably ADLINK’s ASD+ industrial […]

February 4, 2026February 4, 2026 by Jean-Luc Aufranc (CNXSoft) - No Comments

reComputer Jetson AGX Orin Developer Kit GMSL Bundle features 8x GMSL2 camera interfaces, 10GbE networking

Seeed Studio’s reComputer Jetson AGX Orin Developer Kit GMSL bundle is an NVIDIA Jetson AGX Orin 32GB/64GB equipped with eight GMSL2 camera interfaces through two FAKRA connectors. It’s based on the company’s reComputer Mini J501 carrier board – a smaller version of the reServer Industrial J501 – with 10GbE and GbE RJ45 ports, HDMI 2.1 video output, two USB 3.2 ports, two USB 2.0 Type-C Debug/Recovery ports, and fitted with a 128 M.2 NVMe SSD and an M.2 WiFi 5 and Bluetooth 5.0 module, besides the daughterboard with the GMSL2 camera interfaces. reComputer Jetson AGX Orin Developer Kit GMSL Bundle specifications: Supported system-on-modules (one or the other) NVIDIA Jetson AGX Orin 32GB with CPU – 8-core Arm Cortex-A78AE v8.2 64-bit processor @ 2.2 GHz with 2MB L2 + 4MB L3 cache GPU and AI NVIDIA Ampere architecture with 1792 NVIDIA CUDA cores and 56 Tensor Cores @ 930 MHz DL Accelerator – 2x […]

January 27, 2026January 28, 2026 by Debashis Das - No Comments

Lanner EAI-I351 – An NVIDIA Jetson Thor Edge AI computer with 100GbE QSFP28 port and 8x GMSL2 camera

Lanner EAI I351 Jetson Thor Edge AI computer with QSFP28 port

Lanner EAI-I351 is a rugged edge AI computer built around the NVIDIA Jetson Thor platform, featuring a 100GbE QSFP28 port for high-bandwidth networking and 8x GMSL2 camera inputs for low-latency vision processing. The system supports up to 128 GB of 256-bit LPDDR5X memory, features up to four 25GbE lanes via a QSFP28 port, a 5GbE RJ45 port, HDMI 2.0, four USB 3.2 Gen1 ports, two RS232/422/485 serial interfaces with optional CANBus, digital I/Os, and audio interfaces. Three expansion sockets are offered with an M.2 NVMe slot, an M.2 E-Key for Wi-Fi/Bluetooth, and an M.2 B-Key for 4G LTE/5G cellular with dual Nano-SIM support. Designed for industrial deployments, the embedded computer can operate in a –25°C to 70°C temperature range and takes 24V/48V DC power input. It targets robotics, smart manufacturing, and autonomous systems such as collaborative robots, AMRs, and machine-vision-based factory automation. Lanner EAI-I351 specifications: Supported system-on-module – NVIDIA Jetson […]

January 19, 2026January 18, 2026 by Debashis Das - No Comments

2-channel GMSL camera adapter board supports Raspberry Pi 5 and NVIDIA Jetson Orin Nano/NX

Waveshare 2 Ch GMSL Camera Adapter Board

After phasing out the earlier MAX9296-GMSL-Camera-Board, Waveshare has now released the MAX9296-GMSL-DESER-MODULE 2-channel GMSL camera adapter board designed for high-speed, low-latency video transmission on the Raspberry Pi 5 and NVIDIA Jetson Orin Nano/NX developer kits. The adapter is built around the MAX9296A deserializer, and supports two MATE-AX FAKRA Z coaxial inputs for long-distance video transmission and two 22-pin CSI outputs for connection to the host. It supports both GMSL1 and GMSL2 cameras (such as the Sony ISX031) via software configuration and is compatible with serializers like the MAX9295, MAX96717, and MAX96705. These features make it suitable for applications such as robotics, autonomous driving, surround-view systems, and more. Waveshare MAX9296-GMSL-DESER-MODULE specifications: Compatible boards – Raspberry Pi 5, Jetson Orin Nano, Jetson Orin NX developer kits Deserializer IC – Maxim (ADI) MAX9296A GMSL Inputs – Supports two GMSL2 cameras(ISX031) via MATE-AX FAKRA Z connectors (backward compatible with GMSL1) Output Interfaces – 2x 22-pin […]

January 6, 2026 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

NVIDIA Jetson T4000 Edge AI embedded system offers 5GbE networking, four PoE camera ports, DIO, CAN Bus, and more

AAEON BOXER-8742AI Fanless Edge AI System

AAEON BOXER-8742AI is a fanless Edge AI embedded system powered by an NVIDIA Jetson T4000 that was unveiled along with the Jetson Thor T5000 module last August, but officially launched at CES 2026. The Jetson T4000 is a weaker variant, but it’s still extremely powerful with up to 1200 TFLOPS of AI computing power against 2070 TFLOPS for the T5000. The BOXER-8742AI features a 5GbE port, four Gigabit Ethernet RJ45 PoE ports suitable for IP cameras, DIO, RS232, RS485, and CAN Bus interfaces, four USB 3.2 Gen 2 ports, HDMI video output, and more. It’s suitable for high-performance edge AI applications such as smart factory automation, AMR, and AI-assisted roadside unit solutions. AAEON BOXER-8742AI specifications: System-on-Module – NVIDIA Jetson T4000 CPU – 12-core 64-bit Arm Neoverse-V3AE GPU – 1536-core NVIDIA Blackwell GPU with 64 Tensor Cores, 6-TPC MIG VPU Video Decode – 4x 8Kp30 (H.265), 10x 4Kp60 (H.265), 22x 4Kp30 […]

December 30, 2025 by Debashis Das - 2 Comments

Elecrow AI starter kit turns NVIDIA Jetson Orin Nano into a learning platform with 11.6-inch display, 30 electronics modules

Elecrow AI Starter Kit for the NVIDIA Jetson Orin Nano turns the NVIDIA Jetson Orin Nano into a learning and educational kit for students, educators, and hardware enthusiasts looking for a rapid and powerful prototyping platform. The kit integrates an 11.6-inch IPS touchscreen, an 8MP servo-controlled gimbal camera, a voice interaction module, and 30 common electronics modules embedded in the kit. The company also provides 39 Python tutorials for sensor control, computer vision, and basic AI workflows. In addition to the display, camera, and audio features, the kit also includes expansion through I2C, UART, and GPIO. Jetson Orin Nano AI Starter Kit specifications: Main Board – NVIDIA Jetson Orin Nano (Not included in the kit) Display – 11.6-inch IPS touchscreen display with 1366 × 768 resolution Onboard modules Input modules Multimedia – 8MP IMX219-based camera with dual-servo gimbal (PTZ-style control) Sensors Temperature & humidity sensor Ultrasonic distance sensor PIR motion […]