Linux News - Page 42 of 534 - CNX Software

August 28, 2025August 28, 2025 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Octavo OSD62x-PM SiP combines Texas Instruments AM62x SoC with up to 2GB DDR4 in a tiny 14x9mm BGA package

Octavo OSD62x-PM System-in-Package (SiP) integrates Texas Instruments AM62x quad-core Cortex-A53 SoC, up to 2GB DDR4 memory, and required passive components into a tiny 14x9mm BGA package. It’s a smaller and cheaper version of the Octava OSD62x SiP (21x21mm) with AM62x SoC, DDR4, PMIC, EEPROM, and optional integrations. We noted both the OSD62x and OSD62x-PM in our previous article, but both are now available for purchase, and the OSD62-PM-BRK Evaluation Board is also ready to ship. Octavo OSD62x-PM specifications: SoC – Texas Instruments AM62x (AM623/AM625) CPU – Up to 4x Arm Cortex-A53 @ 1.4GHz MCU – Arm Cortex-M4F GPU – 3D graphics up to 2048×1080 @ 60 fps (AM625 only) Storage I/F – 1x eMMC, 2x SDIO, 1x GPMC Display I/F – 24-bit RGB MIPI DPI and OLDI/LVDS up to 1080p60 Camera I/F – 1x MIPI CSI-2 with DPHY 1.2 Networking – 2x 10/100/1000M Gigabit Ethernet with TSN support USB – […]

August 26, 2025 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

RCORE V2 RK3588 module launched for MNT Reform laptops (Crowdfunding)

MNT Reform has launched a crowdfunding campaign for the RCORE V2 module powered by a Rockchip RK3588 SoC coupled with up to 32GB RAM, and a 256GB eMMC flash for the company’s open-source hardware laptops, be it the original MNT Reform or the MNT Reform Pocket. It appears to me that it’s the same module as found in the MNT Reform Next 12.5-inch laptop scheduled to ship by the end of December, but it’s sold separately as an upgrade kit for users of previous models of MNT Reform laptops. The company explains that the RCORE V2 brings a third M.2 slot for fast PCIe-based Wi-Fi cards (with USB Bluetooth), and it’s easier to install since it works without an internal HDMI adapter. MNT Reform RCORE V2 specifications: Based on the Firefly iCore-3588Q module as found in the Firefly AIO-3588Q board SoC – Rockchip RK3588 CPU – Octa-core 64-bit Armv8 SoC […]

August 25, 2025August 26, 2025 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Forlinx FET3506J-C is an ultra-small (40 x 29mm) Rockchip RK3506J SoM with board-to-board connectors

Forlinx Embedded FET3506J-C is an ultra-small system-on-module (SoM) based on Rockchip RK3506J triple-core Cortex-A7 SoC measuring just 40 x 29mm, and equipped with up to 512MB DDR3, and 256MB NAND flash, or 8GB eMMC flash. I first thought I had already written about it, but the Forlinx FET3506J-S module introduced last March has a different design. It measures 44 x 35mm and exposes all I/Os through castellated holes, while the FET3506J-C features two 80-pin board-to-board (B2B) connectors instead. The company also provides the OK3506J-C single board computer for evaluation, but considering the module is inserted into the carrier board, as opposed to soldered, the carrier board could potentially be used with future modules using the same B2B connectors design. Forlinx FET3506J-C system-on-module Specifications: SoC – Rockchip RK3506J/B CPU 3x Arm Cortex-A7 core up to 1.5 GHz (RK3506J) or 1.6 GHz (RK3506B) Arm Cortex-M0 real-time core @ 200 MHz GPU – […]

August 25, 2025August 25, 2025 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

Pi Zero-sized Radxa Cubie A7Z SBC features Allwinner A733 Cortex-A76/A55 SoC, up to 16GB RAM, WiFi 6

Radxa Cubie A7Z is the little brother of the Cubie A7A SBC, still based on a powerful Allwinner A733 octa-core Arm Cortex-A76/A55 SoC, but offered in a more compact form factor inspired by the Raspberry Pi Zero. The compact single board computer also comes with up to 16GB RAM, a microSD card slot, optional UFS flash, micro HDMI and USB-C DisplayPort video output, a WiFi 6 and Bluetooth 5.x wireless module, a 4-lane MIPI CSI camera connector, a PCIe Gen3 FPC connector (at first for Pi Zero-sized board), and a 40-pin GPIO header. Radxa Cubie A7Z specifications: SoC – Allwinner A733 (A733MX‑HN3) CPU Dual-core Arm Cortex-A76 @ up to 2.00 GHz Hexa-core Arm Cortex-A55 @ up to 1.79 GHz Single-core RISC-V E902 real-time core GPU – Imagination Technologies BXM-4-64 MC1 GPU with support for OpenGL ES 3.2, Vulkan 1.3, OpenCL 3.0 VPU 8Kp24 H.265/VP9/AVS2 decoding 4Kp30 H.265/H.264 encoding AI accelerator […]

August 25, 2025August 26, 2025 by Debashis Das - No Comments

Thin mini-ITX industrial motherboard features Intel Core Ultra 5 225H or Ultra 7 255H Arrow Lake-H SoC

Jetway MTX ARH1 Thin Mini ITX Industrial SBC

Jetway MTX-ARH1 is a thin Mini-ITX industrial motherboard powered by either an Intel Core Ultra 5 225H or Ultra 7 225H “Arrow Lake-H” SoC, and is a direct upgrade over the Meteor Lake-H-based MTX-MTH1. The new board also features faster 6400MHz DDR5 memory and conditional 8K display support. Other features mostly stay the same: up to 96GB DDR5 memory, quad display output, triple 2.5GbE networking via Intel I226 controllers, dual M.2 M-Key sockets, an M.2 B-Key with nano-SIM for 4G/5G, an M.2 E-Key with CNVi for WiFi/Bluetooth, plus a PCIe Gen5 x8 slot and SATA with RAID 0/1. There’s also support for watchdog timer, optional TPM 2.0, Realtek audio, USB 3.2 Gen2 and USB 2.0 (with headers), multiple COM ports, GPIO, I²C, and SMBus. These features make this board suitable for industrial PCs, edge AI, AIoT gateways, and multi-display systems. Jetway MTX-ARH1 specifications: Arrow Lake SoC (one or the other) […]

August 25, 2025September 22, 2025 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Centron CT1832 Real.Pi – A Realtek RTD1619B SBC based on Raspberry Pi 3 Model B form factor

Centron Design’s CT1832 Real.Pi is a RealTek RTD1619B SBC that mainly follows the Raspberry Pi 3 Model B form factor and is designed for AIoT applications, vehicle-mounted central control, entertainment/game equipment, and digital signage. It follows the RTD1619B-powered XpressReal T3 SBC based on a smaller form factor, which was introduced a few weeks ago by Fyde Innovations, with support for the Chromium-based FydeOS operating system. The CT1832 Real.Pi board is equipped with 4GB RAM, 16GB eMMC flash, an HDMI 2.0 port, a Gigabit Ethernet port with optional PoE, optional dual-band WiFi and Bluetooth 4.2 module, a 16-pin PCIe x1 connector, and a 40-pin GPIO header, among other features. CT1832 Real.Pi specifications: SoC – Realtek RTD1619B CPU – Quad-core Arm Cortex-A55 @ up to 1.7GHz GPU – Arm Mali-G57 MP1 with support for Vulkan 1.1, OpenGL ES 3.2, OpenCL 2.0 VPU Decoding 4Kp60 AV1, H.265/EVC, and VP9.2, all with HDR support […]

August 24, 2025August 25, 2025 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Getting Started with Quectel EC200U 4G LTE Cat 1 IoT board using the QNavigator and the QuecOpen SDK

Quectel EC200U development board QNavigator

CNXSoft: This is a guest post by Eicut showing how to get started with a Quectel EC200U 4G TLE Cat 1 IoT development board using QNavigator and the QuecOpen SDK. In IoT projects—and across embedded systems in general—we’ve seen a growing demand for higher data exchange rates, along with broader frequency band coverage. These advancements are critical for enhancing the reliability of a device’s communication link with the network. As a result, 4G modules with fallback capability to 2G and 4G networks have emerged as a leading solution in this space. But the key question remains: Which modules should we use to leverage this technology, and what features do they offer? Exploring the Quectel EC200U LTE Cat 1 Module for IoT In this section of the EC200U tutorial, we’ll take a closer look at one of the most popular and dependable options in the IoT space—Quectel’s EC200U module. If you’ve […]

August 23, 2025August 23, 2025 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

TrueNAS is now (unofficially) available for 64-bit Arm platforms with UEFI support

TrueNAS Scale NAS platform was designed to work on x86-64 computers only, but there’s now an unofficial port for 64-bit Arm (Aarch64) targets running a UEFI bootloader, including the Raspberry Pi 4/5 SBCs and other higher-end Arm boards. Previously known as FreeNAS, the community edition, FreeBSD-based TrueNAS Core was phased out in 2022 and replaced with the Linux-based TrueNAS Scale. iXsystems also provides TrueNAS Enterprise, a paid version with more advanced features, but all versions only work on 64-bit x86 machines. TrueNAS forum user Joel0 decided to change that and patched TrueNAS Scale to run on ARM (aarch64). The main requirements are having a 64-bit Arm target, at least 8GB RAM, 16GB boot storage, and a working UEFI bootloader. The image has been tested with a QEMU virtual machine, and it should also work on a Raspberry Pi 4 or 5 with UEFI, but it has not been tested. One […]