nas News - Page 13 of 15 - CNX Software

March 30, 2016March 30, 2016 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

HiMedia Q10 Pro Android TV Box Supports 4K HDR, H.265 & VP9 Video Playback, Comes with a 3.5″ SATA HDD Bay

Hisilicon HI3798C V200 is a promising processor with four Cortex A53 cores, ARM Mali-T720, 4K video output (HDMI 2.0a), 4K H.265/H.264/VP9 decoding with Dolby Vision & HDR10 high dynamic range standards support, native SATA, Gigabit Ethernet and USB 3.0 interfaces, and TS inputs to support tuners. That means products based on the SoC should be both decent media players and NAS, and one of the first product to hit the market will be HiMedia Q10 Pro. HiMedia Q10 Pro specifications: SoC – HiSilicon HI3798CV200 quad-core ARM Cortex A53 processor with ARM Mali-T720 supporting OpenGL ES 3.1/2.0, OpenVG1.1, EGL, and Imprex 2.0 PQ engine with HDR,Dolby vision support. System Memory – 2GB DDR3 Storage – 16GB eMMC flash, 3.5″ SATA bay, and 2-in-1 card reader (MMC/SD) Video Ouput – 1x HDMI 2.0a up to 4K @ 60 Hz, 1x composite video (RCA) Audio Output – HDMI, stereo audio (RCA), coaxial and optical […]

January 15, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Review of EzeeCube Media Hub and Private Cloud Server

EzeeCube is a Linux Kodi based media hub powered by Freescale i.MX6 Quad processor that includes a 1 or 2 TB hard drive by default and is expandable with extra 2TB hard drive modules that you simply stack on top of each other to get up to 10TB storage. I had a look at EzeeCube hardware last October, but due to one issue with the Android app that prevents syncing pictures between my phone and the hard drive on the device, one of the key selling point of the system, I decided to postpone the review. EzeeCube developers finally found a workaround in early December, but as I was busy with other tasks and the end of year holidays, I only managed to finally review the device in the last few days. Initial Setup The first thing that you go through after connecting all cables, and powering up the media […]

December 26, 2015March 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Dune HD Solo 4K is a High-End Media Player with a SATA Bay, a DVB-T2 Tuner, and Sigma Designs SMP8758 Processor

Dune HD, a company specializing in “high-performance digital media players”, has just unveiled Dune HD Solo 4K media player based on Sigma Designs SMP8758 dual core Cortex A9 processor, supporting 10-bit HEVC video decoding up to 2160p @ 30 fps, HD audio pass-though, and including a SATA tray. Dune HD Solo 4K specifications: SoC – Sigma Designs SMP8758 dual core Cortex A9 processor @ 1.2 GHz with an ARM Mali-400 GPU and VXP image processing engine System Memory – 1GB Storage – 4GB flash for firmware, internal HDD rack with hot swap function for a 2.5″ SATA drive, SD card reader (TBC) Video Output – HDMI 1.4b up to 1080p60 and 4K @ 30 Hz (including 23.976, 25, 29.97, 50, 59.94Hz refresh rates), and composite video Audio Output – HDMI, analog stereo audio, coaxial S/PDIF (shared via AV port). 24-bit /192 KHz audio support Video codecs – MPEG2, MPEG4, XVID, […]

December 16, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

$15 pcDuino3 Nano Lite Board Includes Gigabit Ethernet and a Real SATA Port

I often read people complain about the lack of SATA and Gigabit Ethernet on devices, and following up a discussion on a recent post about QNAP TAS-168 and TAS-268 NAS, I was made aware that pcDuino3 Nano board had a little brother without NAND Flash, nor an IR receiver that’s currently selling for $15 on Amazon US. pcDuino3 Nano Lite board specifications are exactly the same as the other version minus the stricken-through items: SoC – AllWinner A20 dual core ARM Cortex A7 @ 1.0 GHz with Mali 400MP2 GPU System Memory – 1GB DRAM Storage – 4GB NAND Flash, SATA connector and microSD card slot (up to 32GB) Video Output – HDMI 1.4 with HDCP support Audio Out – 3.5mm analog audio interface Connectivity – Gigabit Ethernet USB – 2x USB host, 1x USB OTG Expansion Headers – Arduino UNO extension interface with 14xGPIO, 2xPWM, 6xADC, 1xUART, 1xSPI, 1xI2C. […]

December 14, 2015December 14, 2015 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

QNAP TAS-168 and TAS-268 are NAS Running Android and Linux based QTS on Realtek RTD1195 Processor

QNAP has recently launched two network attached storage (NAS) devices with TAS-168 and TAS-268 that are based on Realtek RTD1195 dual core processor, and happen to run Android along side the company’s Linux based QTS operating system, and respectively have one and two bays for 2.5″ or 3.5″ hard drives. QNAP TAS-168 and TAS-268 specifications: SoC – Realtek RTD1195 dual core ARM Cortex A7 processor @ 1.1 GHz with Mali-400MP2 GPU System Memory – 2 GB DDR3 Storage 4 GB eMMC and SD card slot TAS-168 – 1x 2.5″ or 3.5″ SATA @ 3Gbs TAS-268 – 2x 2.5″ or 3.5″ SATA @ 3Gbs Video and Audio Output – HDMI port Connectivity – Gigabit Ethernet USB – 1x USB 3.0, 4x USB 2.0 host ports Misc – IR receiver, LEDs for HDD, LAN, status, and USB, buttons (Power, reset, USB copy) Power – TAS-168 – 12V/3A (36W) power adapter; TAS-268 – 12V/5A […]

August 14, 2015 by Jean-Luc Aufranc (CNXSoft) - 40 Comments

Updated Ethernet & WiFi HDD Enclosure Supports 300Mbps with Mediatek MT7620N Processor

I featured an HDD enclosure with WiFi and Ethernet on CNX Software a few months ago, and several people were interested, bought one, and found out it was running OpenWRT, and easily to adapt to your needs, although some people complains it was not able to connect as a client. There’s now a new model, looking similar, by powered by Mediatek MT7620N and supporting 300 Mbps WiFi. While hardware specifications were not published with the first model, the manufacturer decided to release the full specifications for the new model: Processor – Mediatek MT7620N MIPS processor @ 580 MHz System Memory – 64MB DDR1 Storage 16MB SPI flash for firmware SATA interface for 2.5″ HDD up to 2TB (10TB is shown in the description) File systems – FAT32, NTFS, EXT64 (Sic.). Connectivity 2.4GHz WiFi 802.11 a/b/g/n 2×2 up to 300 Mbps with 2 internal antennas Wireless security – WPA-PSK/WPA2-PSK/AES encryption, Intelligent […]

August 1, 2015August 2, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Cloudshell for XU4 is a $39 NAS Kit for ODROID-XU4 Board

Hardkernel launched ODROID-XU4 development board a couple of weeks ago. The board is a low cost ($74) update to ODROID-XU3 development board, with an Exynos 5422 octa core processor (4x A15, 4x A7), 2GB RAM, Gigabit Ethernet and USB 3.0, making it a pretty good target for a NAS. It’s easy to connect all requires parts such as hard drive and power supply together, but it would normally be a mess on your desk. So the company create a NAS kit for the board with an enclosure, cables, fans, and even an LCD display with they call Cloudshell for XU4 for sell for $39, so you can get a high relatively high performance NAS for around $113 + shipping, which will vary depending on your distributor, as well as an HDD or SSD drive. Cloudshell kit content: Enclosure with top and bottom covers, rear, front and side panels. Available in […]

January 28, 2015March 6, 2015 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

TCL T1 (SL-WR5028J) is a $46 Wi-Fi Router with a 2.5″ SATA Bay

Many routers now come with one or more USB ports to let you connect 3G dongles or/and storage device(s) to share the data on your local network. If you want to go with a fully integrated solution, and obvious solution is to go with a NAS, but these usually cost a bit more, so instead TCL SL-WR5028J (aka TCl T1) router could make a low cost (and low performance) NAS alternative thanks to its internal 2.5″ SATA bay, and it can be had for just $45.99 on DealExtreme. [Update: GearBest sells it for $35.98 with coupon TCLT1] TCL T1 specifications: SoC – Mediatek MT7260 MIPS WiSoC @ 580MHz System Memory – 64MB DDR2 Storage – 8MB Flash for firmware + SATA bay for 2.5″ HDD (5, 7.5 or 9mm thick hard drives are supported). Max capacity: unlimited… 🙂 Connectivity 802.11 b/g/n Wi-Fi up to 300 Mbps with two external antennas […]