nvme News - Page 4 of 9 - CNX Software

November 16, 2023November 16, 2023 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Raspberry Pi 5 gets an M.2 PCIe HAT – Meet PineBerry Pi HatDrive

The Raspberry Pi 5 SBC comes with a PCIe 2.1 x1 interface that has not been overly useful so far since it’s exposed through a non-standard FPC connector. Raspberry Pi Ltd is working on its own HATs to make use of the PCIe connector, but PineBerry Pi may have beaten them to it with the launch of the HatDrive M.2 HAT for Raspberry Pi 5. The HatDrive comes with an M.2 Key-M socket with a PCIe x1 interface and support for 2230 and 2242 modules, so you can install an SSD, an AI accelerator, or another compatible M.2 module. The HAT is connected through a 40mm long 16-pin FPC cable (that supports up to PCIe Gen3) as well as the 40-pin Raspberry Pi GPIO header for the I2C EEPROM required by compliant HATs, plus power supply monitoring and diagnostics, and to let users add another HAT on top if needed. […]

November 12, 2023December 1, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

GEEKOM A5 AMD Ryzen 7 5800H mini PC review – Part 1: Unboxing, teardown, and first boot

GEEKOM A5 is a Windows 11 Pro mini PC based on an eight-core, sixteen-thread AMD Ryzen 7 5800H processor with up to 64GB RAM, NVMe/SATA SSD support up to 2TB, and interfaces such as dual HDMI 2.0, five USB 3.2 Gen 2 10 Gbps ports, 2.5GbE, as well as support a WiFi 6 and Bluetooth 5.2 wireless module. The company has sent us a review sample of the GEEKOM A5 mini PC with 32GB RAM and a 512GB SSD. Today, we will look at the Mini PC’s specifications, go through an unboxing, followed by a teardown, and quickly check out if it works properly with a first boot to Windows 11 Pro. In the next part of the GEEKOM A5 review, we will test performance and features with Windows 11 Pro, followed by an evaluation of the mini PC with Ubuntu 22.04 in the final and third part of the […]

November 6, 2023November 24, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

ZimaCube 6+1-bay NAS offers 2.5GbE, PCIe slots, with either Intel Processor N100 or Core i5-1235U SoC (Crowdfunding)

IceWhale Technology, the company behind the line of ZimaBoard x86 SBCs, has now introduced the ZimaCube (Pro) 6+1-bay NAS equipped with either an Intel Processor N100 Alder Lake-N processor or a more powerful Intel Core i5-1235U Alder Lake-P CPU with additional 2.5GbE ports, PCIe expansion slots, and M.2 sockets. Both models support up to six 2.5-inch or 3.5-inch SATA drives, support for M.2 NVMe SSDs, offer 2.5GbE networking, six USB ports, and one or more PCIe expansion with either PCIe Gen3 (Processor N100) or PCIe Gen4 (Core i5-1235U) enabling the addition of a graphics card, high-speed network cards, and more. ZimaCube (Pro) specifications: SoC ZimaCube – Intel Processor N100 quad-core Alder Lake-N processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel HD graphics @ up to 750 MHz; TDP: 6W ZimaCube Pro – Intel Core i5-1235U 10-core/12-thread Alder Lake U-Series processor with 2x Performance cores @ 1.3/4.4GHz, […]

November 2, 2023November 2, 2023 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

ADATA SE920 USB4 external SSD offers up to 2TB capacity, supports up to 3,800 MB/s data transfers

ADATA SE920 is a small USB4 external SSD with 1TB or 2TB storage capacity that leverages the 40 Gbps connection enabled by USB4 and delivers up to 3,800 MB/s sequential read speed. The storage device supports Thunderbolt 3 & 4 and is backward compatible with USB 3.2 and USB 2.0 standards. The USB-C port makes it suitable for mini PCs, laptops, SBCs, and even smartphones, but one potential downside of the small form factor is that it integrates a fan to cool the SSD although the user can enable/disable it by extending/retracting the telescopic case. ADATA SE920 specifications: Capacity – 1TB / 2TB Host interface – USB4 up to 40Gbps, backward compatible with USB 3.2/2.0 Performance Sequential Read – Up to 3,800 MB/s, or in other a 10GB file can be transferred in about 3 seconds Sequential Write – Up to 3,700 MB/s (USB4) or up to 3,200 MB/s (Thunderbolt […]

October 27, 2023March 26, 2024 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Raspberry Pi CM4-based industrial panel PC adds 4G LTE, RS232 and RS485, M.2 NVMe SSD

EDATEC ED-HMI2120-101C is a Raspberry Pi CM4-based industrial panel PC with a 10.1-inch capacitive touchscreen display with plenty of interfaces to cater to a wide range of use cases from robotics to energy management and industrial automation. The panel PC builds upon the ED-HMI2020-101C introduced just a few months ago, but adds a range of features with dual Ethernet, RS485 and RS232 interfaces, and optional supports for an M.2 NVMe SSD and 4G LTE cellular connectivity. The device now supports an even wider DC input range from 9V to 36V and provides three 12V DC outputs to power external hardware such as an additional LCD. ED-HMI2120-101C specifications (with highlights in bold and strikethrough showing the differences against the earlier ED-HMI2020-101C model): System-on-Module (SoM) – Raspberry Pi CM4 SoC – Broadcom BCM2711 CPU – Quad-core Cortex-A72 processor @ 1.5GHz GPU – VideoCore VI conformant with OpenGL ES 3.1 & Vulkan 1.2 […]

October 20, 2023October 19, 2023 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

microSD Express memory cards to support up to 2GB/s data transfers

SD Association (SDA) has announced the new SD 9.1 specification that doubles the speed of microSD Express memory card speed up to 2GB/s, defines four new SD Express Speed Classes to ensure guaranteed minimum sequential performance levels, and adds support for multi-stream access and related power and thermal management to assure the guaranteed performance. We first covered the microSD Express cards in 2019 as they were added to the SD 7.0 specification with promises of SSD performance through a PCIe 3.0 interface delivering up to 985MB/s. Over four years have passed since then, and I have yet to write about devices supporting the new standard, but the SD Association is not giving up with the introduction of the SD 9.1 specification that doubles the speed of the microSD Express cards, and full-size SD Express card can even reach close to 4GB/s. More specifically, the maximum speed achievable on microSD Express […]

September 15, 2023September 28, 2023 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Intel N100 mini PC offers eight USB ports, NVMe and SATA storage

We’ve already written about many mini PCs powered by the Intel Processor N100 SoC and other SKUs part of the Alder Lake N-series family, but the HUNSN BM34 is a bit different as it offers eight USB ports, with two USB 3.0 and six USB 2.0 ports that should remove the need for an external USB hub for most use cases. The fanless mini PC ships with up to 16GB DDR4 memory, supports one mSATA SSD, one NVMe SSD, and one 2.5-inch SATA drive, and offers two HDMI ports and DisplayPort video output, plus dual GbE, WiFi 5, and two audio jacks for speaker and microphone. HUNSN BM34 specifications: SoC – Intel Processor N100 quad-core Alder Lake-N processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel HD graphics @ 750 MHz; TDP: 6W System Memory – Up to 16GB DDR4 via SO-DIMM socket Storage 1x mSATA socket, […]

August 29, 2023August 29, 2023 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Orange Pi Compute Module 4 – A low-cost Rockchip RK3566-powered alternative to Raspberry Pi CM4

Orange Pi Compute Module 4 is a system-on-module mechanically and electrically compatible with the Raspberry Pi CM4, but powered by a Rockchip RK3566 quad-core Arm Cortex-A55 AI processor just like the Radxa CM3 introduced a few years ago, or more recently the Banana Pi BPI-CM2 (RK3568). The new module, also called Orange Pi CM4 for shorts, comes with 1GB to 8GB RAM, 8GB to 128GB eMMC flash, and an optional 128/256MBit SPI flash, as well as a Gigabit Ethernet PHY and on-board WiFi 5 and Bluetooth 5.0. It comes with the two 100-pin high-density connectors found on the Raspberry Pi CM4, and a smaller 24-pin connector for extra I/Os. Orange Pi Compute Module 4 specifications: SoC – Rockchip RK3566 quad-core Arm Cortex-A55 processor @ 1.8 GHz with Arm Mali-G52 2EE GPU, 0.8 TOPS AI accelerator, 4Kp60 H.265/H.264/VP9 video decoding, 1080p100f H.265/H.264 video encoding System Memory – 1GB, 2GB, 4GB, or […]