radxa News - Page 9 of 13 - CNX Software

September 7, 2020August 24, 2021 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

CrowPi2 Raspberry Pi 4 Education Laptop Review

I started my review of CrowPi2 Raspberry Pi 4 Learning Kit a while ago and at the time I showed content from the kit and its first boot. I’ve now spent more time with this very special Raspberry Pi 4 laptop and will focus this review on the education part, namely CrowPi2 software, but will also look at thermal cooling under stress with and without a fan, and try to install another Raspberry Pi compatible board inside the laptop shell. CrowPi2 Education Software It’s quite important to read the user manual before getting started as there are a few non-intuitive steps you may have to take. First I assume the wireless keyboard would just connect after pressing the power button, but it did not. The user manual explains the RF dongle is inside the mouse, and once you connect it you’ll be able to use the keyboard that has some […]

July 25, 2020 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

Rock Pi 4C SBC with 4GB RAM, HDMI and DisplayPort Launched for $59 and up

Last October, Radxa unveiled Rock Pi 4C SBC as an update to the company’s Rock Pi 4 SBC, with the same Rockchip RK3399 hexa-core processor, 4GB RAM, but instead of providing one HDMI output only, Rock Pi 4C board offers two video output just like Raspberry Pi 4 board, but with a twist, since it combines a micro HDMI port with a Mini DisplayPort connector. It’s all good except for one small detail. So far, it was not possible to purchase the board. The good news is that Radxa has now announced the availability of the board for just $59 on AllNetChina. You can also buy Rock Pi 4C on other platforms, but the price is much higher at $109.99 on Amazon, and $99.99 on Aliexpress. Rock Pi 4C specifications: SoC – Rockchip RK3399 big.LITTLE hexa-core processor with 2x Arm Cortex-A72 @ up to 1.8 GHz, 4x Cortex-A53 @ up […]

July 17, 2020July 21, 2020 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Rock Pi E SBC Comes with WiFi, Bluetooth, Two Ethernet Ports, and Optional PoE

Radxa has launched several Rockchip boards from the higher-end Rock Pi N10 (RK3399Pro) and Rock Pi 4 (RK3399) SBC’s, to the low-end and tiny Rock Pi S powered by an RK3308 Cortex-A35 processor. The company has now launched Rock Pi E single board computer equipped with the popular Rockchip RK3328 quad-core Cortex-A53 processor and designed for router & gateway application with two Ethernet ports, WiFi, and Bluetooth. Power-over-Ethernet (PoE) also comes as an option. Rock Pi E specifications: SoC – Rockchip RK3328 quad-core Arm Cortex-A53 processor @ up to 1.3 GHz System Memory – 256MB, 512MB, 1GB, or 2GB DDR3 Storage – MicroSD card slot up to 128GB, eMMC module support ( 16GB / 32GB / 64GB / 128GB) Video & Audio – 3.5mm AV output jack (Not 100% sure whether composite video is supported) Connectivity 1x Gigabit Ethernet port with PoE support via an additional HAT 10/100M Ethernet Wireless […]

April 16, 2020April 16, 2020 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

YARC Case Can House a Raspberry Pi Board with one HAT Expansion Board and Up to 3 Hard Drives (Crowdfunding)

There are plenty of enclosures for Raspberry Pi board and other compact x86 or Arm Linux SBCs, but many projects require expansion boards and it’s not always possible to use an off-the-shelf case. That’s with that in mind that Stefano Zorzi and other enthusiasts have created YARC (Yes, Another Raspberry Case), a hexagonal case that supports the most popular single board computers, even when an add-on board – such as a Raspberry Pi HAT – is attached to the board. There’s enough space for up to three 2.5″ hard drives. Those are the boards officially supported (tested?) with the case: Raspberry Pi B +, 2B, 3B, 3B +, 4B, A +, 3A + Hardkernel ODROID C1, C2 AAEON Up Board Asus Tinker board and Tinker board S Radxa Rock Pi 4 Orange Pi PC, Pi PC2, Pi PC Plus Basically any board with compatible mounting holes can be installed in […]

March 30, 2020April 15, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Linux 5.6 Release – Main Changes, Arm, MIPS & RISC-V Architectures

Linus Torvalds has just announced the release of Linux 5.6 on the Linux Kernel Mailing List: So I’ll admit to vacillating between doing this 5.6 release and doing another -rc. This has a bit more changes than I’d like, but they are mostly from davem’s networking fixes pulls, and David feels comfy with them. And I looked over the diff, and none of it looks scary. It’s just slightly more than I’d have preferred at this stage – not doesn’t really seem worth delaying a release over. So about half the diff from the final week is network driver fixlets, and some minor core networking fixes. Another 20% is tooling – mostly bpf and netfilter selftests (but also some perf work). The rest is “misc” – mostly random drivers (gpio, rdma, input) and DTS files. With a smattering of fixes elsewhere (a couple of afs fixes, some vm fixes, etc). […]

December 31, 2019December 31, 2019 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Year 2019 in Review – Top 10 Posts and Stats

2019 is closing to an end, or you may already be into 2020 while reading this post. In any case, that means it’s time to look back at 2019 and look forward to the events and new products to take place next year. While 2018 was a boring year for new processors, 2019 brought us some interesting new chips such as Amlogic S922X / A311D, or the first Arm Cortex-A55 only processors such as Amlogic S905X3. Rockchip RK3399Pro was promising when it was announced last year, but it never really took off. It was a pretty quiet year for Allwinner as well. RISC-V architecture has been ramping up with the first general-purpose RISC-V MCU: GD32V, WCH CH572 Bluetooth LE MCU, the launch of more SiFive RISC-V cores, and Kendryte K210 RISC-V AI processor announced last year has found its way into more and more boards. There have also been the […]

December 8, 2019February 27, 2020 by Jean-Luc Aufranc (CNXSoft) - 46 Comments

ROCK Pi SATA HAT Targets ROCK Pi 4 & Raspberry Pi 4 NAS

Radxa ROCK Pi 4 is a single board computer (SBC) powered by Rockchip RK3399 hexa-core processor and inspired by Raspberry Pi 3 Model B+. The company has now designed ROCK Pi SATA HAT expansion board to design 4-bay NAS based on Raspberry Pi 4 and ROCK Pi 4. There are 3 models with support for 2, 4 or 5 drives: Dual/Quad SATA HAT connected over two USB 3.0 ports and working with both boards Penta SATA HAT connected over PCIe and compatible with ROCK Pi 4 only ROCK Pi Dual/Quad SATA HAT Specifications: 2x or 4x SATA connectors supporting 2.5″ or/and 3.5″ HDD/SSD 2x USB 3.0 port to connect to RPi 4 via one or two JMS561 USB to SATA controllers Storage Features – HDD suspend mode, UASP, software RAID 0/1/5 Misc Fan and heatsink header for Raspberry Pi 4 CPU cooling Optional PWM control fan for HDD heat dispatching […]

December 4, 2019December 4, 2019 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

ROCK PI N10 RK3399Pro SBC Sells for $99 and up

Rockchip RK3399Pro processor is based on the popular Rockchip RK3399Pro hexa-core Arm Cortex-A72/A53 processor plus an embedded neural processing unit (NPU) delivering up to 3 TOPS for AI acceleration. So far you had to spend over $200 to get either Toybrick RK3399Pro board or 96Boards RK3399Pro development kit to get started with the processor. Some other companies announced their own RK3399Pro SBC such as Pine64 RockPro64-AI, or Khadas Edge board, but those are not available yet. But there’s now a more affordable Rockchip RK3399Pro SBC courtesy of Radxa’s Rock Pi N10 available on Seeed Studio in three variants: $99 model A with 4GB RAM (3GB for CPU/GPU + 1GB for NPU), 16GB eMMC flash $129 model B with 6GB RAM (4GB for CPU/GPU + 2GB for NPU), 32GB eMMC flash $169 model C with 8GB RAM (4GB for CPU/GPU + 4GB for NPU), 64GB eMMC flash Rock Pi N10 specifications: […]