DietPi is Lightweight, Easy to Use Debian Based Distribution for Raspberry Pi, ODROID, and Orange Pi Boards

Raspberry Pi, Hardkernel ODROID, and Orange Pi are some of the most popular and cost effective development boards on the market today, and one British developer, going under Fourdee nickname, has released a lightweight distribution called DietPi working for all Rasbperry Pi boards, ODROID-C1(+), ODROID-XU3/XU4, and Orange Pi PC, with Orange Pi 2 and Orange Pi Plus support coming soon, as well as a VMWare virtual machine also available for evaluation. The compressed downloads are about 80 to 100MB depending on the target, the image that can be dump with dd or Win32DiskImager requires a 1GB or greater micro SD card as the image itself is about 500MB large, Internet access (Ethernet or Wifi), and optionally a USB Drive to allow installation on a USB drive for better performance, which of course does not apply if you have an eMMC module with your ODROID board. The image also contains some […]

UP Board Gets 2GB RAM and 32GB Storage Option, Linux Port in Progress

The UP Board is a Raspberry Pi like board with an Intel Atom processor that’s currently on Kickstarter with a few hours left, and it has just reached its 100,000 Euros stretch goal meaning that beside the 16GB storage / 1 GB version, a version with 32Gb storage and 2GB is now offered. The company also showed their progress with the implementation Debian based Ubilinux on the Intel Atom x5-Z8350 board. That means the specifications have now been updated: SoC – Intel Atom x5-Z8350 “Cherry Trail” quad core processor @ 1.44 GHz (Burst frequency: 1.84 GHz) with Intel Gen8 HD graphics @ 500 MHz System Memory –  1 GB or 2 GB DDR3L-1600 Storage – 16 or 32 GB eMMC Video Output / Display – HDMI, DSI connector Audio I/O – HDMI Connectivity – Gigabit Ethernet USB – 4x USB 2.0 host ports, 1x USB 2.0 pin header, 1x micro […]

Raspberry Pi Zero is a $5 Board Based on Broadcom BCM2835 Processor

The Raspberry Pi board had some serious competition price-wise with products such as Orange Pi PC, NanoPi, or even C.H.I.P, but the Raspberry Pi foundation has lowered the price barrier even further with the Raspberry Pi Zero board, based on the same processor as the original Raspberry Pi (model 1) boards but clocked at a higher speed, and in a much smaller form factor, and launching at an unbeatable price: $5. Raspberry Pi Zero specifications: Processor – Broadcomm BCM2835 ARM11 processor @ 1GHz with VideoCore IV GPU System – 512MB RAM Storage – microSD slot Video Output – mini HDMI port and composite video (via 2 unpopulated  pins) USB – 2x micro USB OTG ports for data and power Expansion – 40-pin through-holes Power Supply – 5V via micro USB port Power Consumption – 0.5-0.7W (100-140mA at 5.09V) according to Raspi.TV Dimensions – 65mm x 30mm x 5mm The board […]

Add an SSD, WiFi, and RTC to Your Raspberry Pi 2 Board with a $49 CSB502SSD Add-on Board (Crowdfunding)

If you wish your Raspberry Pi 2 could be a little more responsive, including WiFi connectivity and keep the time even when network is not available, and a few extra goodies then Pi 2 Design‘s CSB502SSD add-ons board (Raspberry Pi HAT) could be worth a look. CSB502SSD technical specifications: Storage – mSATA socket for up to 1TB on-board storage via PL2571 USB to SATA bridge controller USB – 2x extra USB 2.0 ports Connectivity – GWF-3M08 WiFi 802.11 b/g/n module (Ralink RT5370) with IPEX connector and up to 150 Mbps connection. Real Time Clock – DS1339 with 16mm coin cell battery backup and programmable alarm. Sensors – 1-Wire DS18B20 temperature sensor to monitor the health of SSD drive. 64-bit ID to identify the shield Power Supply – 8V-24V DC input (Up to 27.5W) for peripherals and Raspberry Pi 2. Dimensions – Full size Raspberry Pi 2 I/O Shield Since the […]

Raspberry Pi’s VideoCore 4 GPU Driver Added to Linux Mainline in Kernel 4.4

While your x86 and AMD64 computer will usually boot with Linux mainline without issues, most ARM boards and device won’t, and many of the ones that do boot only support headless mode, and limited functionalities. The Raspberry Pi had been supporting HDMI output with a simple framebuffer for a while, but a developer working on the Videocore 4 (VC4) GPU found inside Broadcom BCM2835 and BCM2836 processors, has recently submitted a patchset to add VC4 GPU to Linux mainline that should make it to Linux 4.4. The commit message does mention some features are still missing, but it’s a start: This pull request introduces the vc4 driver, for kernel modesetting on the Raspberry Pi (bcm2835/bcm2836 architectures). It currently supports a display plane and cursor on the HDMI output. The driver doesn’t do 3D, power management, or overlay planes yet. Via Golem and Sanders. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in […]

$99 pi-topCEED Raspberry Pi 2 Based Desktop Computer Includes a 13.3″ Display (Crowdfunding)

Pi-Top, a laptop kit based on Raspberry Pi 2 board and a 13.3″ display, and which cost about $299.99 with the board, and had a successful crowdfunding campaign despite the price nearly matching equivalent laptops on the market. CEED is now back on Indiegogo with pi-topCEED desktop computer also based on a Raspberry Pi 2 board and a 13.3″ display, but which much more aggressive pricing, as the kit could be yours for $99 with the board, or $70 without, and shipping was included to the few countries I checked out. pi-topCEED Specifications: SoC – Broadcom BCM2836 quad core Cortex A7 processor @ 900MHz with VideoCore IV GPU System Memory – 1GB LPDDR2 Storage – micro SD card slot Display – 13.3″ HD LCD screen screen with eDP 1.2 interface; 1366×768 resolution;  262K colors; 60Hz refresh rate; 3W power consumption. Video & Audio Output – HDMI (connected to display board […]

Run x86 Linux and Windows applications in Raspberry Pi and other ARM Linux Devices with Exagear

A few weeks ago, I finally decided to buy a Raspberry Pi 2 board as it could always be useful for some testing, at least for comparison purposes. I ended up buying it from Ebay for $40, as it’s $3 to $5 more expensive locally. Nevertheless, I was not sure what I’ll use it first for, but after seeing a tweet for Exagear Desktop software that allows ARM boards to run x86 Linux or Windows applications, the latter through wine. The program is available for Raspberry Pi, Raspberry Pi 2, and ARMv7 devices for $19.95 to $29.95. I asked for a version for testing purposes, and I was given a Google Drive link to download Exagear for Raspberry Pi 2, as well as a 3-month trial key. Installation is very easy. I started by downloading and installing Raspbian Jessie the usual way on a 32GB micro SD card. It went […]

Orange Pi Plus 2 Allwinner H3 Board Includes 2GB Memory

Shenzhen Xunlong has made yet another Allwinner H3 board. It’s called Orange Pi Plus 2 with basically the same specifications as Orange Pi Plus, but the layout has been modified with a slightly wider board, and the RAM upgraded from 1GB to 2GB. Orange Pi Plus 2 specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with ARM Mali-400MP2 GPU up to 600 MHz System Memory – 2GB DDR3 Storage – 8GB eMMC, micro SD card slot, SATA interface (via a USB to SATA chip), Video Output – HDMI, AV port Audio I/O – HDMI, AV port, on-board microphone Connectivity – 10/100/1000M Ethernet, 802.11 b/g/n Wi-Fi (Realtek RTL8189ETV) USB – 4x USB 2.0 host ports, 1x micro USB OTG port Camera – CSI Interface Expansions – 40-pin Raspberry Pi Model A+/B+ (mostly) compatible header Debugging – 3-pin UART header for serial console Misc – IR receiver; Power, […]

Memfault IoT and embedded debugging platform