Reviews - Page 92 of 119 - CNX Software

December 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

Tronsmart Vega S95 Telos TV Box Unboxing and Teardown

Tronsmart Vega S95 Telos is an Android mini PC powered by Amlogic S905 quad core Cortex A53 processor, but contrary to the two other S905 device I previously reviewed, namely K1 Plus and MINI MX, it’s not been designed for the ultra low end, as it comes with 2GB RAM, 16 GB eMMC flash, 802.11ac WiFi, Gigabit Ethernet, and a SATA port. GeekBuying sent me one sample for review, and I’ll start with some pictures of the package, device, and board, before running it through a full test procedure. Tronsmart Vega S95 Telos Unboxing I got the box via DHL in the following package with makes it clear it’s a 4K media player. The box comes with a simple IR remote control requiring two AAA batteries, an HDMI cable, a SATA cable for laptop drives, a 12V/2A power supply, and a user’s manual in English. The device looks somewhat like […]

December 4, 2015March 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 289 Comments

Review of Beelink MINI MX TV Box with MX Player

Beelink MINI MX Amlogic S905 Android media player has similar features, and costs about the same as K1 Plus TV box I reviewed last week, so it would be interesting to compare both. While specifications are similar there are some differences. For example, MINI MX lacks AV output, and only features two USB ports against four for K1 Plus, but it supports Gigabit Ethernet which could be an advantage while playing high bitrate 4K videos, as well a Bluetooth 4.0. I’ve already provided pictures and torn down MINI MX, so today is time for the full review and a comparison with K1 plus. First Boot, Settings and First Impressions I connected my USB 3.0 hard drive to one of the USB port, and a USB hub to tghe other port with a USB webcam, a USB keyboard, and two RF dongles for a gamepad and an air mouse. I also […]

December 1, 2015December 1, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Quick Start Guide for LinkIt Smart 7688 (Duo) Board

Mediatek Labs has announced LinkIt Smart 7688 development boards powered by Mediatek MT7688 WiSoC earlier today, but I was selected for a close beta several weeks before the launch, and I’ve had time to play a little with the boards, so today I’ll report my experience getting started with LinkIt Smart 7688 amd 7688 Duo by writing a Quick Start Guide showing how to setup the boards, upgrade firmware, access the serial console, run “Blink LED” sample applications with Python and JavaScript, as well as the Arduino IDE, and connect to the Internet. Initial Setup You’ll only need a micro USB cable and a computer with WiFi and USB ports to get started with the board. The green LED (top) for the MCU will turn on immediately, while the red LED (bottom) for WiFI will blink once, and only turn on continuously after 5 seconds, and within 30 seconds after […]

November 28, 2015November 28, 2015 by Jean-Luc Aufranc (CNXSoft) - 68 Comments

K1 Plus Amlogic S905 TV Box Review

Videostrong KI Plus is one of the first Amlogic S905 TV boxes to be launched on the market, and it also happens to be one of cheapest model selling for around $45 on various sites, and it’s even available for $39.99 on GearBest for Black Friday / Cyber Monday. I’ve posted the specifications and pictures of the device previously, and after updating the firmware, I’ve finally completed the review. First Boot, Settings and First Impressions As usual, I’ve connected a whole bunch of cables and peripherals to the device to make the power supply can handle it, including a USB hard drive, a USB webcam, a USB keyboard, a USB hub with two RF dongles for Tronsmart Mars G01 gamepad and MeLE F10 Deluxe air mouse, as well as a HDMI, optical audio and Ethernet cables, and a speaker connected to the 3.5mm AV jack and powered by one of […]

November 27, 2015November 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

H.264 & H.265 4K Video Playback on Amlogic S905 Android TV Box

I’ve almost completed my review of Videostrong K1 Plus Android box powered by Amlogic S905, and while there are many shortcomings, 4K video playback is actually pretty good with Android’s Video Player (Kodi is not really usable @ 4K). I connected the device to LG 42UB820T 4K UHD TV, and set video output to 2160p @ 60Hz, and went through several video samples: Beauty_3840x2160_120fps_420_8bit_HEVC_MP4.mp4 (H.265 @ 30 fps – No audio) – OK big_buck_bunny_4k_H264_30fps.mp4 (H.264 @ 30 fps – MPEG1/2 and AC3 audio) – OK big_buck_bunny_4k_H264_60fps.mp4 (H.264 @ 60 fps – MPEG1/2 and AC3 audio) – Video looks somewhat OK, but big audio delay or AV sync issue. BT.2020.20140602.ts (H.265 Rec.2020 compliant – AAC audio) – OK (First time I can play this video on any hardware). Fifa_WorldCup2014_Uruguay-Colombia_4K-x265.mp4 (H.265 @ 60 fps – AC3) – Video is very good, but no audio MHD_2013_2160p_ShowReel_R_9000f_24fps_RMN_QP23_10b.mkv (10-bit HEVC @ 24 fps – no […]

November 24, 2015November 25, 2015 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

No.1 D3 Smartwatch (Mediatek MT6261) Review

Since I’ve listed the specs and torn down No.1 D3 smartwatch, I’ve spent several days wearing the smartwatch / watchphone, and trying most of its features, so it’s time for a review. I’ll go through all screens of the user interface, include a video review, before providing a conclusion to this review Charging the watch take between 15 to 30 minutes, and you can turn it on by pressing the only button on the side of the watch for a few seconds. The first menu you are likely to see if the one with the phone functions including the Dialer, messaging, phonebook and call logs. You can use these in two ways: with a micro SIM card inserted into the watch, or/and via your smartphone connected over Bluetooth. I mostly used the watch connected to my smartphone, but both methods worked for me. When you receive a call, it’s not […]

November 23, 2015January 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

MINI MX 4K Android Media Player Unboxing and Teardown

I received my first Amlogic S905 TV box last week with K1 Plus, and although I have not reviewed it yet due to some issues with Google Play, I’ve run some benchmarks on the Amlogic S905 platform, which some people mentioning that results could have been impacted by the small heatsink leading to CPU throttling. The good news is that I know have a new Amlogic SD905 TV Box to play with as GearBest sent me Beelink MINI MX TV box. Today, I’ll take a few photos of the device and the board, before hopefully publishing the full review early next week. Beelink MINI MX Unboxing I received the package via DHL, and thanks to its low price I did not have to pay custom duties or VAT. The package does not show any specific brand, only Mini MX 4K Movies products, as well as the specifications on the back. […]

November 21, 2015May 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

DragonBoard 410c Development Board Quick Start Guide and Android Benchmarks

Linaro’s 96Boards initiative was announced in February with the introduction of Hikey board, and while progress has been rather slow, there are now two boards available for sale: Lemaker Hikey and Qualcomm Dragonboard 410c. The main advantage of these board is that 96Boards is not only an hardware specification, but also a software specifications that mandate most code to be open source, with recent versions of Linux and U-boot, and in the case of Dragonboard 410c work is being done with Freedreno open source GPU drivers. Now that I’ve got a board I’ll explain my experience with the purchasing process, take a few pictures, and show how to get started with Android, and install the latest version, before running a few benchmarks. Ordering DragonBoard 410c Development Board I normally don’t like purchasing from North American and European distributors, because of the potential documentation involved to comply with silly laws, high […]